A portable root plugin.json without a version left the Codex binding's version empty, which skips the post-update version check, so an update could advance the snapshot while Codex still ran an older copy. Codex reports 1.0.0 for such a manifest, so expect that instead. Refs Codex review on #396.
26 KiB
sidebar_position
| sidebar_position |
|---|
| 4 |
plugin
Manage complete native plugins across supported tools. Capability checks distinguish installation support from format discovery. Start with Manage plugins across tools.
skillshare plugin # Interactive manager
skillshare plugin add # Source → plugin → targets → review
skillshare plugin discover ./my-plugin --json
skillshare plugin add ./my-plugin --target claude --target codex --no-tui
skillshare plugin add ./my-plugin --no-tui # Keep it in Skillshare; choose targets later
skillshare plugin import review@team --from claude --no-tui
skillshare plugin list --json
skillshare plugin inspect review --json
skillshare plugin disable review --target codex --no-tui
skillshare sync plugins --dry-run --json
skillshare sync plugins --no-tui
skillshare plugin enable review --target codex --no-tui
skillshare plugin check review --json
skillshare plugin update review --target claude --no-tui
skillshare plugin remove review --no-tui
enable and disable change Skillshare's sync selection, not the Agent's native
enabled state. Deselecting a target saves the choice. The next sync plugins
removes its managed installation while retaining the definition. Selecting it
again allows the next sync to reinstall it. Unmanaged plugins are unaffected.
add without --target (or with nothing selected in the interactive picker) keeps
the plugin in Skillshare without installing it anywhere. Add targets later with the
same source and --name, or from the plugin's row in the dashboard; that install
uses the source as it is then. Such a plugin stays managed when its last target is
removed. remove NAME without --target removes it from Skillshare.
Commands
| Command | Behavior |
|---|---|
list |
Configured bindings and native installation state; interactive manager in a terminal |
discover SOURCE |
Inspect a local directory, owner/repo, or HTTPS Git repository |
add [SOURCE] |
Choose and install a whole plugin with its target adapter, or an npm: package through Pi |
import [NATIVE-ID] |
Adopt an existing installation without reinstalling or enabling it |
inspect NAME |
Inspect one managed package |
sync [NAME] |
Reconcile selected targets and retry incomplete native operations |
check [NAME] |
Compare source content with the recorded digest; never update |
update [NAME] |
Review source changes and use a supported native update operation |
enable / disable [NAME] |
Include/exclude a target in the next sync |
remove [NAME] |
Uninstall managed bindings and remove their definitions |
Bare commands prompt for missing inputs in a terminal. Noninteractive mutation
commands require explicit inputs. sync and check may operate on all packages.
sync --all does not include plugins; use sync plugins explicitly.
Options
| Option | Meaning |
|---|---|
--target TARGET |
Repeatable selection: claude, codex, cursor, antigravity (agy alias), antigravity-cli, copilot, grok, pi, opencode, or the name of another account of an Agent; see the capability table below |
--plugin NAME |
Select one plugin from a source marketplace |
--name NAME |
Logical package name when adding or importing |
--from TARGET |
Import from Claude, Codex, Antigravity CLI, Copilot, Grok, Pi, OpenCode, or another account of an Agent |
--dry-run, -n |
Preview without changing Skillshare or Agent configuration |
--source-ref REF |
Git branch, tag, or commit for discover, add, and update; remote sources only |
--entry PATH |
Explicit built OpenCode JS/TS entry, relative to the package root (discover and add) |
--revision ID |
Refuse application if source, configuration, or native inventory changed since preview |
--json |
Machine-readable output; disables TUI |
--no-tui |
Disable interactive menus; also respects tui: false |
--global, -g |
Global Skillshare config and native user scope |
--project, -p |
Project config; Claude, Antigravity, Pi, or OpenCode (never global fallback) |
JSON output includes source paths and native identifiers. Do not put credentials in source URLs. A failed mutation can still return successful per-target outcomes; the CLI exits nonzero when any target fails. Inspect the result before retrying.
Target support
| Target | Format | Global | Project | Update |
|---|---|---|---|---|
| Claude Code | .claude-plugin/plugin.json |
Yes | Yes | Native update |
| Codex | .codex-plugin/plugin.json or Agent Plugins root manifest |
Yes | No | Refresh reviewed source and add it again, only if enabled in Codex |
| Cursor | .cursor-plugin/plugin.json or Agent Plugins root manifest |
Yes | No | Replace reviewed local copy |
| Antigravity Desktop | Root plugin.json with an explicit name |
Yes | Yes | Replace reviewed local copy |
| Pi | package.json with pi resources, or pi-package keyword and conventional resource folders |
Yes | Yes, with native project trust | Refresh managed source snapshot |
| OpenCode | package.json with an SDK dependency, .opencode/plugins/ entry, or explicit --entry |
Yes | Yes | Refresh managed source snapshot |
| Antigravity CLI | Native root manifest or Claude manifest accepted by agy | Yes | No | Update natively to preserve enablement |
| GitHub Copilot CLI | .plugin/plugin.json, .github/plugin/plugin.json, Claude manifest, or Agent Plugins root manifest | Yes | No | Refresh reviewed source, only if native enabled state is known and enabled |
| Grok Build | .grok-plugin/plugin.json or Claude manifest | Import/remove only; native trust required for install | No | Update natively |
| Kimi Code | kimi.plugin.json or .kimi-plugin/plugin.json | Discovery only | No | Not automated |
| Hermes | .hermes-plugin/plugin.yaml | Discovery only | No | Not automated |
| Devin | .devin-plugin/plugin.json | Discovery only | No | Not automated |
Kimi's noninteractive lifecycle, Hermes's profile inventory/consent, and Devin's
local inventory/trust/cloud distinction are not yet verified by these adapters.
Their formats are shown during discovery, but installation is disabled with a
reason. A source declaring a target does not imply that Skillshare can manage it.
list --json and discover --json include targetDefinitions with allowed
operations; discovery also exposes targetInfo for each format's version,
components, entry, and validation problem. A broken manifest is isolated to its
target; a malformed catalog is reported as a warning without hiding valid formats.
Another account of an Agent
A target declared as another account of an Agent is a plugin target too, for claude, codex and pi. Skillshare runs that Agent's own CLI against the account's config directory, through CLAUDE_CONFIG_DIR, CODEX_HOME or PI_CODING_AGENT_DIR:
targets:
claude-work:
agent: claude
config_dir: ~/.claude-work
skillshare plugin add owner/repo --target claude-work
skillshare plugin import demo@market --from claude-work
An account with cli runs that compatible CLI instead, such as omo for a Pi account, against the same config directory. A Pi account also sets SENPI_CODING_AGENT_DIR and OMO_CODING_AGENT_DIR, which Pi forks read before PI_CODING_AGENT_DIR. If the CLI cannot be found, the operation fails; Skillshare does not fall back to the Agent's own.
The account takes the operations of the Agent it belongs to and keeps its own bindings under its own name, so a plugin can be installed in one account and not in the other. Accounts exist in global scope only: a project's plugins belong to the project, not to one account. --target and --from accept the account name, and the terminal picker and the dashboard's Plugins page list it next to the Agents.
Cursor and Antigravity
These adapters copy the whole plugin into documented local discovery directories. They do not require a CLI executable or modify marketplace registries:
- Cursor:
~/.cursor/plugins/local/<name>; local imports must be allowed. Reload Cursor and check Customize. An installed marketplace plugin with the same name takes precedence over a local copy. - Antigravity desktop:
~/.gemini/config/plugins/<name>globally;.agents/plugins/<name>in a workspace (or an existing_agents/plugins/directory). If both workspace directories exist, consolidate them first. - The standalone agy CLI has a separate plugin store. The
antigravitytarget manages the desktop/workspace discovery paths, not that CLI store.agyis only a Skillshare target alias. Use--target antigravity-clifor the standalone CLI;--target agyretains its existing desktop meaning.
Use plugin add for these local packages. Importing pre-existing local folders or
marketplace installs is not supported. Skillshare refuses to overwrite unowned
folders, symlinks, or locally edited managed content. An explicit Antigravity
manifest name keeps the identity stable across Git checkouts and snapshots.
Pi and OpenCode
Pi keeps the first global registration and the last project registration of a package. If an earlier global or later project source has an unresolved identity, Skillshare cannot prove which entry owns a package and keeps potentially shadowed entries Unknown/read-only, including inherited project deltas. It does not guess identity by stripping URL queries. Proven entries outside that ambiguity remain editable.
Pi uses pi install / pi remove; inventory reads documented package settings
without loading extension code. PI_CODING_AGENT_DIR is respected. Pi project
trust must be established in Pi; Skillshare does not pass --approve for you.
npm packages from pi.dev
plugin add npm:<package> installs a package published to npm, such as one listed on
pi.dev, through Pi itself:
skillshare plugin add npm:@scope/package --target pi --dry-run --json -g
skillshare plugin add npm:@scope/package@1.2.0 --target pi --no-tui -g
Pi downloads the package and runs its install scripts, so Skillshare can't review its
content first; check the package on pi.dev or npm before adding it. discover does not
accept npm sources, and an npm source takes no --source-ref, --entry or --plugin.
Only Pi targets take npm sources, including a Pi account that runs pi. For an account
that runs another executable, install the package with that executable, then import it.
With --project, Pi installs the package into the project's settings; once the project
has a .pi folder, Pi changes its packages only after you trust the project in Pi.
Pi keeps one entry per package name. If Pi already has the same source, add imports
it; another version of the package is installed, and Pi replaces that entry's source.
update runs pi update, except for a package pinned to an exact version, which Pi
keeps: add the package again with the new version instead. When you turned off some of the
package's extensions, Pi keeps those rules on the new version, and Skillshare records them
again so a later reinstall restores them. A Pi package that another Skillshare package
already manages is refused; update or remove that one instead.
In the dashboard's add dialog, you can paste the pi install npm:<package> command or the
package's pi.dev address; either becomes its npm: source.
Choosing a package's extensions
In the dashboard, the target page of pi and of a Pi account has an Extensions
tab. It lists each package entry of that target's settings.json with the
extensions its filters select. A switch writes one exact +path or -path rule
into that entry's extensions list. When removing the file's own exact rule already
gives the state the switch asks for, the switch removes that rule instead, so turning
a file back to what the remaining rules select leaves no rule behind. Remove rule,
shown when the switch would not remove the rule itself, deletes the exact rule for that
file, written as a relative or an absolute path, and the file then follows the
remaining rules; the preview shows the result. Apply shows a preview first and
edits only those lists: the entry's other keys, its skills, prompts and
themes filters, glob and ! rules, and the rest of the file stay exactly as
written. A string entry becomes {"source": ...} so it can hold a rule. For a
string entry, Pi takes a package's skills, prompts and themes only from its pi
manifest, while an object entry also loads them from the package's skills,
prompts and themes folders when the manifest leaves them out. A string entry
of a package with such a folder is read-only, because Skillshare can't show that
converting it leaves those resources as they are. A source that is one file is
read-only too, because Pi loads it as it is and ignores filters. A user-scoped npm registration without a managed cache is Unknown/read-only, not
necessarily uninstalled: Pi may use a legacy global npm/pnpm root that Skillshare
does not probe. If the file changed after the preview, or Pi holds its settings lock, nothing is written.
An empty lock directory older than Pi's 10-second stale threshold can be reclaimed
only if its inode and mtime are unchanged. Fresh, renewed, replaced, nonempty,
file, and symlink locks are refused. Reclamation follows Pi's stale-lock protocol;
age does not prove an owner has died, and the final check/removal is not an atomic CAS.
While writing, Skillshare holds that lock the way Pi does and writes nothing if it
loses it. Before each apply, Skillshare saves a persistent record of the changed
extension lists and the before/after file hashes. Successful records are kept
without automatic pruning; if Apply fails, only the new record for that attempt
is removed. This is not a copy of settings.json and cannot restore the whole file. The tab lists every package in the settings, including ones installed with Pi itself, such as npm: packages from pi.dev. Skillshare installs and removes packages only through plugin: plugin add takes a local directory, a Git source or an npm package, and plugin import --from pi adopts a package installed with Pi.
Skillshare reads packages without running them, so the tab shows what the
settings select (the Configured column), not whether Pi loaded them; reload Pi
after applying. A file the settings name but the package lacks is marked as
missing. A choice Skillshare can't work out shows Can't tell with the reason
and where to change it, never a guessed on or off. Editing needs the target's own
Pi to be 0.99.2 or later (the oldest version checked against Pi itself) and
strict JSON settings; an older version is read-only and the tab says which version it found. A Pi account that runs a
different executable is read-only, and Skillshare does not run it. An entry whose
list is [] (nothing loads) is read-only, as is any extension decided by a
pattern Skillshare cannot evaluate, such as ? against an emoji. An entry with an
empty source, or whose source or rules contain an unpaired UTF-16 surrogate escape
or invalid UTF-8, is left as written and read-only, since Skillshare can't read it
exactly as Pi does. Pi uses only the first global entry of a package, so when
Skillshare can't read that entry, the package's later entries are read-only too.
A project that syncs to Pi has the same tab on its project page. It shows each
package as the project's settings select it on top of the global ones, marked as
inherited from pi (global) or as a project override. A switch saves a rule to
the project's .pi/settings.json only, the way pi config does: a global package
gets a project entry {"source": ..., "autoload": false, "extensions": [...]}
that changes only the files it names and leaves the global entry as it is. A local
source is written relative to .pi, an npm or git source as the global settings
have it. When the last project rule of such an entry is removed, the entry is
removed only if that cannot reveal an earlier registration's filters; otherwise
the empty winning override is kept. Only explicit JSON false means a delta;
autoload: null is not false. A project entry with autoload: false and no global entry loads only the
files it names with +. The file, and its .pi folder, are created only when you
apply. The global settings and Pi's trust.json are never written, and
Skillshare never trusts a project for you: Pi uses the project's settings only if
it trusts the project. A global source that carries credentials or a query is
never copied into a project, so that package is read-only there, and so is every
package when the project's settings have an entry Skillshare can't read. Apply
holds Pi's lock on the project file and checks both settings files and the
package again right before it writes. Extensions in Pi's own extensions
folders, including files linked there by extras, are listed
read-only with where to change them; a project lists its own folder, which Pi
reads only if it trusts the project, and the global one.
OpenCode registers the managed entry as a file URL in opencode.json or the
existing opencode.jsonc, preserving comments and unrelated entries. Version 1
uses plugin; version 2 uses plugins. XDG_CONFIG_HOME and an absolute global
OPENCODE_CONFIG are respected; ambiguous or unsupported overrides are rejected.
OpenCode must be on PATH so Skillshare can choose the version's schema.
A local OpenCode source must already include its built entry (main, a string
root export, or index.js) and required runtime dependencies. Skillshare does not
run build scripts or install dependencies into the source. Registration is not
proof the module loaded successfully; check OpenCode after reload.
Import accepts plain Pi package sources and, on Pi 0.99.2 or later,
filtered object entries with supported sources and option shapes. Preview lists
retained field names, never opaque values. Import changes neither native settings
nor installed files. The original entry is kept in private Skillshare state;
shared config stores only its digest. Sync/update retain the live entry. When
uninstalling, Skillshare captures its latest rules and options; reinstall restores
that object before native installation, avoiding a default-enabled window.
Multiple restores in one Apply recognize only that Apply's own exact writes;
unrelated settings changes still stop later restores.
Keep private state with these bindings: a missing, modified, or cross-target record
blocks restoration. On Windows, new registration directories use protected owner/SYSTEM
ACLs. Existing directories and records must grant access only to the current user and
privileged SYSTEM/Administrators principals; unsafe or unverifiable ACLs refuse import
or restoration. Skillshare does not rewrite existing ACLs: retain the records and repair
their access protection as the owner before retrying. Unresolved sources, ambiguous precedence, unsupported encoding,
and local references Pi would normalize remain read-only. Plain OpenCode entries
can be imported; filtered OpenCode entries are still rejected.
Imported Pi packages are updated with pi update SOURCE in global mode, which
keeps their settings entry; a project's are updated in Pi, because pi update
also reaches global packages. Imported OpenCode v1 packages are updated in their
native tool. OpenCode v2 global imports can use its native update command; project imports must be
updated natively because the v2 update command is global.
skillshare plugin add ./cursor-plugin --target cursor --no-tui
skillshare plugin add ./agy-plugin --target agy --no-tui -p
skillshare plugin add ./pi-package --target pi --no-tui
skillshare plugin add ./opencode-package --target opencode --no-tui
skillshare plugin import npm:my-pi-package --from pi --name my-package --no-tui
Refs and explicit entries
Advanced options in Add plugin accept an optional Git ref and OpenCode entry. Leave them empty for the normal guided flow. The terminal wizard accepts the same flags; automation can use:
skillshare plugin discover obra/superpowers --source-ref v6.3.0 --json
skillshare plugin add owner/repo --source-ref v1.0.0 --target copilot --no-tui
skillshare plugin add ./package --entry dist/plugin.js --target opencode --no-tui
skillshare plugin update review --source-ref v1.1.0 --target claude --dry-run --json
Bindings record source_ref and the resolved commit. Installation uses the
reviewed commit; check and update resolve the configured ref again, so a branch
can advance while a commit remains pinned. --revision is a preview token, not
a Git ref. --entry is relative to each candidate's package root and must already
exist; it does not trigger a build or package-manager install.
Copilot and Antigravity CLI installs use reviewed local snapshots. Imports have no reviewed source for reinstall: after removal, install in the native client and sync again. Grok also requires native trust before install/reinstall. Skillshare never supplies native trust approval flags.
Compatibility and boundaries
- Claude requires its native
.claude-plugin/plugin.jsonpackage. - Codex accepts
.codex-plugin/plugin.jsonand recognized portable rootplugin.jsonpackages. When a package has both, Codex installs from the portable rootplugin.json, so Skillshare expects that manifest's version, or1.0.0when it has none. A Claude-only package is not silently converted. - Sources may contain a marketplace with local plugin entries. External catalog catalogs are merged by plugin name/path. Conflicting paths are rejected; external entries are reported with instructions to add their repository directly or install natively and import. Command-based sources are not auto-approved.
- Complete source snapshots retain plugin scripts, assets, and safe relative
symlinks (including
AGENTS.md → CLAUDE.md). Absolute, escaping, dangling, cyclic, and.git-referencing links and special files are rejected; sources are limited to 20,000 files and 100 MiB. - Native installation is not proof of runtime activation. Restart/reload the Agent and complete authentication or hook trust in that Agent.
- Codex runs
codexfromPATH. When it is not there, Skillshare tries Homebrew's/opt/homebrew/binand/usr/local/bin, then the CLI inside the Codex desktop app (ChatGPT.apporCodex.appon macOS,%LOCALAPPDATA%\OpenAI\Codex\binon Windows). SetSKILLSHARE_CODEX_CLIon a machine where Codex is elsewhere. An account with its owncliis not searched. - Codex native project installation is not provided by this adapter. Sync selection still works for global Codex installations.
- Codex has no update command, so an update adds the plugin again from the
refreshed snapshot. Adding always enables it, so a plugin disabled in Codex is
skipped. An imported Codex plugin is updated with
codex plugin marketplace upgrade NAME, which reinstalls every plugin Codex installed from that marketplace, as Codex also does when it starts. - An update skips a target it cannot reach and says why; the plugin's other Agents still update, and a skipped update stays pending for a later sync.
- Imported plugins retain their original marketplace identity.
checkcannot infer release availability for an imported plugin without a source. If an imported Claude or Codex plugin's native marketplace is gone, sync and update skip that target and say so. This also happens on another machine where that marketplace was never added. Restore the marketplace in the Agent, or remove the target and add the plugin again from its source; Skillshare never moves an imported plugin to another source on its own. - Skillshare registers one marketplace per managed Claude/Codex plugin, named
skillshare-<plugin>-<hash>(older installs keepskillshare-<hash>). Removing or excluding the plugin also removes that marketplace, even when the plugin is already gone; a failed cleanup is retried on the next sync. An update registers it again if it went missing. Same-name registrations at another path and imported plugins' marketplaces are left alone; snapshots and native caches are retained. - These registrations point at this machine's Skillshare state directory, in user and project settings alike. Sharing Agent settings through Git or a dotfile manager carries paths that do not exist elsewhere; add the plugin from its source on each machine instead.
- Claude also reads a skill folder in its skills directory that has a plugin
manifest as a plugin named
<name>@skills-dir, and loads only one plugin per name. Adding a Claude plugin with the same name says so in the preview: Claude loads the plugin and skips the skill folder until one of them is renamed or removed.
The native lifecycle is exercised with Claude Code 2.1.276, Codex CLI
0.154.0, Pi 0.85.1, and Copilot CLI 1.0.86. Antigravity CLI
1.2.6 was checked with isolated native install/list/remove operations. OpenCode 1.18.31 is used to verify version-aware
registration; the v2 schema is covered by fixture tests. Cursor and Antigravity
filesystem lifecycles are tested in isolated directories, without claiming GUI
runtime activation. Installed command capabilities and inventory schemas are checked at
runtime; unsupported operations are blocked with an explanation.