Commit Graph
281 Commits
Author SHA1 Message Date
Willie f28e5e23f4 fix(install): keep local installs updatable from any directory and in shape (#336)
* fix(install): keep local installs updatable from any directory and in shape

Follow-ups to local-source change detection (#334):

- Global installs recorded a relative local path as typed, so `update`
  and `check` resolved it against whatever directory they ran in and
  failed with "source path does not exist". Global CLI and dashboard
  installs now record the absolute path. Project mode keeps the path as
  written, because .skillshare/config.yaml is shared across machines.
- The dashboard installs the root of a directory that also holds child
  skills as its SKILL.md alone, but `update` re-copied the whole
  directory, pulling in child skills and unrelated files. Updates now
  keep that shape. The detection is shared with `check` so both agree on
  which files belong to the install.

* fix(install): never narrow a whole-directory update to SKILL.md alone

The SKILL.md-only shape was inferred from a child skill in the source that
the recorded hashes lack. A whole-directory install whose source gained a
child skill later matched that too, so `update` replaced it with SKILL.md
alone and deleted its other files. Decide from the recorded files instead:
only an install that recorded SKILL.md alone keeps that shape.
2026-10-02 20:30:27 +08:00
Willie 9847f59a3e feat(check): detect changes at local install sources (#334)
* feat(check): detect changes at local install sources

Skills installed from a local path (for example a skill shipped inside an
app bundle) could already be refreshed with `update`, but `check` always
reported them as "local source", so users had no signal that the source
had changed after an app update.

`check` now re-hashes the files at the recorded source path and compares
them with the hashes stored at install/update time. It reports
update_available on a difference, up_to_date on a match, and an error
naming the path when the source is gone. The path is resolved the same
way `update` resolves it before re-copying, so a successful update always
brings the status back to up_to_date. The CLI and both Web API check
handlers share the comparison in internal/check.

Refs #206

* fix(check): avoid false local-source updates and show check errors

Review follow-ups for local-source change detection:

- The dashboard installs the root of a directory that also holds child
  skills as its SKILL.md alone, so hashing the whole source reported
  update_available right after a clean install. Compare only the files
  such an install copies, recognized by recorded hashes that contain none
  of the child skills present in the source.
- A relative source path resolves against the cwd of the install, which
  is not recorded, so checking from another directory reported a missing
  source. Relative sources are no longer compared.
- The dashboard dropped the new check `message`, so a missing source only
  showed a generic "Check failed". Carry it into the status tooltip.

* revert: restore video files accidentally removed in 1fb13b75

The review-fix commit picked up unrelated staged deletions under video/. They belong to separate work and are not part of this change.
2026-10-02 19:50:58 +08:00
star-nebula 4e3b2b269a fix(sync): report include patterns that match no skill (#326)
Target include/exclude patterns are matched with filepath.Match against the
source-path flat name, while target_naming: standard shows the bare SKILL.md
name in the target directory. A pattern written with the name the target shows
selects nothing, so sync prunes the entries a working pattern had linked, and
the only trace is the echoed include: line, which never says that any of those
patterns matched zero skills.

Add FindUnmatchedIncludes and render one diagnostic per include pattern that
selects no discovered skill, suggesting the flat names whose last path segment
is the pattern. exclude is left alone: an exclusion that blocks nothing is the
normal state of a spare filter, while an include that selects nothing is always
a mistake and is the destructive direction. The diagnostic goes to DiagOutput,
so --json output is unchanged, and no filtering, naming, or pruning behavior
moves.

Closes #325
2026-10-02 15:54:53 +08:00
Willie d17c1ab013 fix(plugin): remove Claude marketplaces in every scope and explain skill clashes (#323)
Removing a Skillshare marketplace from Claude passed --scope user (or
project). Claude refuses a scoped removal when the marketplace is only
recorded in known_marketplaces.json, which happens once synced settings
drop its declaration, so cleanup failed on every sync. Remove it without
a scope: the name is unique to the binding and its root is checked
first, so every scope's copy is Skillshare's. A name declared at
several paths is reported as a conflict and nothing is removed.

Claude also reads a skill folder that has a plugin manifest as
<name>@skills-dir and loads only one plugin per name, so installing a
Claude plugin named like such a skill made Claude report the skill as
not loaded with no warning beforehand. The install preview now says
which copy Claude will load.

Validation: make check, the UI vitest suite and tsc in the devcontainer;
the cleanup and clash tests fail without the change. Claude 2.1.287
rejected the scoped removal and accepted the unscoped one against a copy
of an affected config.

Release-As: 0.23.4
2026-10-02 05:58:55 +08:00
Willie 7f3b5e7b1e fix(plugin): clean up and explain Skillshare marketplaces (#321)
Managed Claude/Codex marketplaces were named skillshare-<hash>, which
says nothing in native marketplace lists, and they stayed registered
after the plugin was excluded or removed. Cleanup ran only after a
native uninstall, so a plugin already removed in the Agent, a failed
first install, or a failed cleanup left the marketplace behind for good.

Name new marketplaces skillshare-<plugin>-<hash>, and remove the one
Skillshare registered whenever its plugin is excluded or removed, also
when the plugin is already gone. Cleanup checks that the marketplace is
registered from Skillshare's own state directory, re-lists afterwards,
and stays pending for the next sync on failure or while the marketplace
list cannot be read. An update registers a missing managed marketplace
again.

An imported plugin reinstalls from its native marketplace. When that
marketplace is gone (for example when synced settings dropped it), sync
failed with a generic "command failed". Skip that target with the reason
instead, so other Agents still sync. Skillshare does not move an import
to its recorded source on its own: that would install a distribution
and version nobody reviewed for that Agent.

Failed outcomes now carry their translation key, and the dashboard
shows each distinct failure once instead of the joined English text.

Validation: make check and the full UI vitest suite in the devcontainer,
tsc and eslint; the new Go tests fail without the change. Claude and
Codex marketplace removal was checked against the real CLIs in
isolated config directories.

Release-As: 0.23.3
2026-10-02 05:08:30 +08:00
Willie 8af54053cc feat(mcp): validate Pi 1.0 oauth.authServerMetadataUrl (#318)
Pi 1.0 adds oauth.authServerMetadataUrl and trusts that document instead
of discovering the authorization server, so it requires https except on
loopback. Skillshare passed the field through unchecked, which left a
wrong URL to fail only at sign-in inside Pi. Check it on save in both
the CLI and the dashboard, like oauth.callbackUrl.

Pi 1.0 also keeps OAuth sign-ins per server name and URL; document that
renaming a server or changing its url needs a new sign-in in Pi.

Validation: make check in the devcontainer, mcpView vitest, tsc and
eslint; the new Go and UI tests fail without the check.
2026-10-02 03:35:53 +08:00
Willie 9bdc1b3a22 fix(hooks): Git hook follow-ups from #310 (#317)
* fix(hooks): report inactive Git reasons once and warn on a git account

The inactive reason from #310 was appended to every change message and
also added to the plan warnings, so the CLI and the dashboard preview
showed it twice. Global and project roots on the same old Git added the
same warning twice as well, which the preview uses as a React key. Keep
the reason in inactiveReason and a single deduplicated warning.

The git binding always manages Git config hooks, so an account target
named git silently lost its hooks. Warn when an entry uses that binding;
stay quiet otherwise so doctor does not warn about a valid config.

The planner tests for file decisions and main checkout origins no longer
depend on Git 2.54 now that actions are not relabeled, so they run on
older runners too.

Validation: make check in the devcontainer (Git 2.39.5); each new test
fails without its fix.

* fix(doctor): report missing Git as inactive instead of unsynced

When Git is not installed, Git hook outputs are skipped with an inactive
change. Doctor listed it as "not synced (inactive)" and suggested running
sync, which cannot install Git. Report the reason instead, and only
suggest sync when a change is pending or conflicting.

Validation: make check in the devcontainer; the new integration test
runs doctor with an empty PATH and fails without this fix.
2026-10-02 03:15:44 +08:00
Rusty Shackleford 1a2389dea2 feat(hooks): manage Git config hooks (#310)
Git 2.54 added named config hooks, but keeping their registrations and
helper paths consistent across machines still required manual config
edits. Bring them into the same preview, sync, and recovery workflow as
Agent hooks.

- Global and project scope, with linked worktrees sharing the common dir
- Portable helper files, collision detection, and ownership tracking of
  generated files and include.path entries
- Backups and restore preserve unrelated settings and conditional includes
- Management never executes hooks; Git below 2.54 is reported as inactive
  while outputs are still generated
- CLI/API inventory, raw YAML editing in the dashboard, localized docs
2026-10-02 02:56:54 +08:00
Willie b86b52a491 feat(ui): share several plugins as one install command
Passing plugins to a teammate meant looking up each source, plugin name
and ref and typing a `skillshare plugin add` per plugin.

The Plugins page now has Share, in the header and in each row's menu. It
lists the plugins added from an HTTPS source, and copies one line that
adds the ticked ones in order. Each add passes --no-tui by default, so
the whole list lands in Skillshare without a picker per plugin; the
recipient ticks Agents on the Plugins page afterwards. An option keeps
the per-plugin Agent picker instead. The adds are joined with && on one
line because, pasted on separate lines, the first picker would read the
rest as keystrokes. Plugins from a local directory are left out, since
the path only exists on the sharer's machine.

Validation: vitest for plugins API, PluginsPage and i18n (29 tests),
tsc --noEmit, eslint, and ai-context check.
2026-10-02 01:56:25 +08:00
Willie ffabe1a86a feat(ui): set backup retention limits and delete all backups
Target folder backups were capped at a fixed 10 snapshots and 500 MB, and
the dashboard could only remove them one at a time. Users with larger
targets or little disk space had no way to tune either.

The global config now takes backup.max_count and backup.max_size_mb
(0 = no limit); sync, the dashboard's sync and backup --cleanup apply them,
while the 30-day limit stays fixed and project snapshots keep the defaults.
The Target folders tab shows the limits in its toolbar, opens a panel to
change them, and adds Delete all behind a confirmation. File, MCP and Hooks
backups are not touched.
2026-10-02 01:25:29 +08:00
Willie 5dd0260ad3 feat(doctor): check MCP servers, hooks, plugins and extras drift
Doctor only diagnosed skills and agents. MCP, hooks and plugins had no
check at all, and extras only confirmed that the source and target parent
directories existed. Their misconfigurations stayed hidden from both the
CLI and the dashboard's Doctor page.

Doctor now reuses each domain's own read-only logic in both modes:
- MCP: the static part of mcp check (env, command, client rules, sync),
  without DNS lookups or starting servers
- Hooks: the hooks sync preview (failures, pending changes, conflicts)
- Plugins: the plugin sync preview without fetching sources, run only
  when a package exists
- Extras: config validation, broken links in targets, and drift as diff
  reports it (flatten/extension targets are not compared)

The dashboard labels for these checks, plus the shared_target_paths,
cross_target_discovery and tracked_repos checks that had none, are
translated in every locale.
2026-10-02 01:25:29 +08:00
Willie 6b3e1cbf05 fix(mcp): follow Pi 0.99.2's auth, server name and exposure rules
Pi 0.99.2 reads its own auth object, which sends a provider's login token, but Skillshare refused it as the old pi-mcp-adapter auth string and dropped it on load and import. Tell the two apart by shape, and check that auth goes to an https or localhost url in global mode, where Pi reads it.

Pi now reads server names that differ only in - and _ as one server and skips the second with a config error, so refuse the second before writing it. codemode-deferred became an alias of codemode, so the dashboard and docs describe it as the older name.
2026-10-01 23:33:59 +08:00
Willie 73c4a8d27e feat(ui): resolve Git pull conflicts across computers
Guide diverged repositories through pull-and-merge or commit-and-pull before pushing. Compare conflicting file versions in the dashboard and require explicit choices tied to the reviewed revisions, while preserving both histories and automatic metadata merging.

Cover previews, modify/delete conflicts, stale and invalid choices, binary and large files, and dry-run behavior. Add an isolated preview fixture, verification runbook, translations, and documentation.

Validated with devcontainer make check, targeted Git API and UI tests, UI lint/build, website build, React Doctor, and a real isolated UI pull-resolution-push flow across all four themes.
2026-10-01 23:08:43 +08:00
Rusty ShacklefordandWillie 54b39d0741 fix(mcp): preserve default homes in account shells (#312)
An Agent environment override pointing at a declared account must not redirect the plain target and prune its default home.

Use account-aware resolution for sync, import and dashboard reads. Park entries whose home no longer resolves, retain ownership, and record entry scope so intentional project cleanup still works.

Cover the account-shell reproduction, directory aliases and scope recovery with regression tests, and document the warnings.

Co-authored-by: Willie <egg358358@gmail.com>
2026-10-01 22:17:58 +08:00
Willie bdd1fcf286 fix(sync): keep links to other locations when pruning agents and extras
Merge-mode pruning for agents and extras removed any link whose name was
not expected, so links a user made to agent or extra files outside the
source were deleted on the next sync or `extras --remove-target --prune`.

Agents and extras do not record their links in a manifest, so the #315
provenance check cannot be reused. Prune now removes a link only when it
is broken or resolves inside the source. Relative links are resolved from
the real parent directory, matching how createLink writes them, so
orphans under a symlinked target directory are still found.
2026-10-01 21:23:30 +08:00
Rusty ShacklefordandWillie aefc9ea0e4 feat(hooks): support account targets in global bindings (#308)
Additional Claude, Codex and Pi homes currently require hand-written hooks.
Resolve declared global account targets through their Agent and config_dir,
while retaining account names in sync, import, inventory and backups.

Preserve ownership when a home moves or disappears, protect cleanup and
restore against directory aliases, and keep plain Agent defaults when an
environment override points at an account. Update dashboard, validation,
schema and localized documentation with regression coverage.

Co-authored-by: Willie <egg358358@gmail.com>
2026-10-01 21:21:53 +08:00
star-nebula 5f3e79f19e fix(sync): prune only links skillshare created (#315)
Merge-mode prune removed any target entry that was a symlink or junction
resolving under the skills source, without checking whether skillshare had
created it. Links made by hand or by another tool were therefore deleted by
name, silently and outside trash, so they were not recoverable through
restore.

Ask the manifest, which the directory branch of this same function and all
of copy-mode pruning already treat as the ownership record: a live link into
the source is pruned when it is tracked there or when --force is set, and is
kept and reported as a local entry otherwise. Broken links into the source
and the force escape hatch behave exactly as before.
2026-10-01 20:50:51 +08:00
Willie bcb8c6c781 fix(plugin): skip Agents an update cannot reach instead of blocking it
A plugin installed on several Agents could not be updated anywhere when
one of them could not take the update: a plugin disabled in Codex or
Copilot, or an imported package, blocked the whole plan, so Claude
stayed behind too. These targets are now skipped with the reason, and
the rest update. A skipped update stays pending, where the previous
noop cleared it and left Skillshare believing a stale Agent was current.

Two of those were not real limits: an imported Codex plugin now updates
through `codex plugin marketplace upgrade`, and an imported Pi package
in global mode through `pi update`, which keeps its settings entry.

Skip reasons carry a message key so the dashboard translates them, and
a plugin whose Agents hold different versions shows each instead of
none.

Refs #309
2026-10-01 17:11:20 +08:00
Willie b201caab5b feat(plugin): update Codex plugins by adding them again
Codex has no plugin update command, so Skillshare refused to update a
Codex binding and left that Agent to be maintained by hand. Codex's add
replaces an installed plugin with its marketplace's current copy
atomically, so an update now refreshes the reviewed snapshot, adds the
plugin again, and checks the installed version.

Add always enables the plugin, so one disabled in Codex is skipped with
the reason rather than turned back on. An imported binding is skipped
too, since Codex upgrades Git marketplaces itself. Both are skipped, not
blocked, so the plugin's other Agents still update in the same run.

Refs #309
2026-10-01 16:50:32 +08:00
Willie f837f0e94d feat(mcp): turn off a global server for Pi from the project switch
A Pi project entry replaces the global one and is skipped without a
command or url, so a switch-only entry left the server on in Pi and the
project page could not turn it off there. Reporters want a server off in
one project while every other project keeps loading it.

For a project under mcp.projects, the switch now writes the global
server's command, or its url without the query, with enabled: false to
the project's .pi/mcp.json. A disabled server never starts, so args, env
and headers stay out of a file that may be committed, and every sync
rewrites the entry from the global server. A project's own config cannot
see the global server, so pi there is still refused. The migration that
dropped pi from switch-only entries is gone.

Refs #305
2026-10-01 16:08:23 +08:00
Willie 886e3672a2 feat(plugin): run a compatible CLI for an account target
Pi forks such as omo keep Pi's directory layout and commands but ship
their own executable, so an account target pointed at one still ran
`pi` for plugin commands. A shell alias cannot help, since Skillshare
runs the CLI without a shell.

An account target can now set `cli` (or `target add --cli`) to a name
on PATH or an absolute path. Pi accounts also export
SENPI_CODING_AGENT_DIR and OMO_CODING_AGENT_DIR, which omo reads before
PI_CODING_AGENT_DIR. A missing CLI fails instead of falling back, and a
missing working directory is no longer reported as a missing CLI.

Refs #307
2026-10-01 15:50:43 +08:00
Willie 154b824837 fix(mcp): explain how to turn off a global server for Pi in a project
The docs said Pi cannot turn off a global server in one project, and the
error for a disabled entry targeting Pi only listed the clients that
support it. Pi can do it: a project entry replaces the global entry of the
same name, so it works when the project entry is complete and sets
enabled: false. What Pi cannot take is a switch-only entry, which it
rejects for lacking a command or url, leaving the global server on.

Say that in the docs and point the error at piOptions: {"enabled": false}.

Refs #305
2026-10-01 12:39:19 +08:00
Willie 6fbb5e109b feat(ui): add Git Sync discard changes
Let users discard uncommitted source changes after confirmation, with dry-run support. Restore tracked files to HEAD and remove untracked files while preserving ignored files, nested repositories, and root-scope config.yaml.

Guard against ancestor repositories and repositories without a first commit. Cover the API and confirmation flow with regression tests and sync all UI locales and Git Sync documentation.
2026-10-01 10:17:47 +08:00
Willie c327a26e30 feat: native hooks, MCP tool policy and Pi built-in MCP (v0.23.0) (#304)
* feat(hooks): manage native hooks across agents

Add global and project hook management for ten coding agents with native
format adapters, explicit ownership, revision-guarded synchronization and
selective backup/restore. Preserve unrelated native configuration and leave
hook execution and trust decisions with each agent.

Expose CLI commands and completions alongside dashboard import, editing,
native preview, target/project views, synchronization and backups. Localize
messages and document the workflows across supported locales.

Validation: devcontainer make check, full dashboard Vitest suite,
TypeScript/Vite build, scoped ESLint, isolated CLI lifecycle and real UI
acceptance. Native agent hook execution was not tested.

* feat(mcp)!: sync Pi only through its built-in MCP

Pi could be synced through three different mechanisms (built-in MCP,
pi-mcp-adapter, or the extension file), chosen per server. Mixing them
inside one scope was an error users hit easily, and the adapter and
extension files drifted from what Pi itself reads. Pi's built-in MCP
now covers what the other modes offered, so every Pi server is written
to ~/.pi/agent/mcp.json or <project>/.pi/mcp.json.

Existing setups migrate on the next sync: entries Skillshare wrote to
mcp-adapter.json are removed through the ownership ledger, extension
entries are rewritten in place, and hand-written entries stay put.
piExtension and piOptionsPrune still load (with a notice) so old
configs keep working, and are dropped on the next save. directTools is
kept but no longer rendered, since only the adapter reads it.

Pruning unchanged fields Skillshare wrote earlier is now always on,
the per-project off switch no longer applies to Pi, and the removed
--pi-extension and --pi-options-prune flags explain the change instead
of failing as unknown. Import still reads mcp-adapter.json read-only so
servers kept only there can be brought over.

BREAKING CHANGE: --pi-extension and --pi-options-prune were removed;
Pi servers are always synced to Pi's built-in MCP file.

* fix(mcp): load Pi switches and adapter options left from before 0.23.0

Phase 1 made Pi sync only through its built-in MCP, which left two
upgrade paths broken or misleading:

- A project entry with disabled: true that selected Pi used to work in
  adapter mode, but now fails every sync with "pi cannot turn off".
  Loading now takes pi (and Pi accounts) out of such an entry with a
  notice; an entry left with no targets stays and turns nothing off, so
  an explicit empty list is now valid for a switch. Saving a new switch
  for pi still fails.
- piOptions keys that only pi-mcp-adapter reads (lifecycle, idleTimeout,
  approveTools, ...) were copied into Pi's built-in mcp.json, where
  nothing reads them. Loading drops them with a notice naming each key,
  and saving new ones is refused. Keys neither Pi nor the adapter
  documents still pass through. includeTools/excludeTools are left for
  the tool policy change, which converts them.

Both changes rewrite the YAML node on load, like the phase 1 legacy
fields, so the next save persists them.

* feat(mcp): portable tool policy per server

Users need one place to say which of a server's tools the model sees,
instead of Pi-only adapter options that Pi's built-in MCP no longer
reads. A server's tools{expose, allow, deny} is rendered per Agent:
Pi gets exposure and an ordered toolExposure, Codex gets
enabled_tools/disabled_tools, Copilot gets its tools list. Parts an
Agent cannot hold (OpenCode and Kilo have no per-server field) are
named in the plan and by mcp check rather than dropped silently.

directTools and the adapter's includeTools/excludeTools are converted
on load and on import, so existing configs keep their behavior; the
--direct-tools flag is removed with a pointer to the new flags.
check --live now reports tool names so the dashboard can suggest them.

Refs #140

* feat(ui): drop the Pi mode, prune switch and Direct tools from MCP

Since 0.23.0 Pi syncs only through its built-in MCP and the API no longer
returns piExtension, so the server dialog showed an empty "Pi MCP mode"
select, links to pi-mcp-adapter and pi-mcp-extension, a prune switch the
backend ignores and adapter-only Direct tools. Toggling Pi also opened a
mode setup that no longer exists, and Pi was still offered as an Agent
that can turn a global server off per project, which the backend refuses.

Pi now shows only tool exposure, its other settings and one link to
Pi's MCP docs. The import dialog still sends piExtension, but only to
pick between Pi's mcp.json and the legacy mcp-adapter.json, which the
listed path already tells apart. Settings the config still carries from
before 0.23.0 are explained once on the MCP page from the source's
notices, worded in the dashboard's language.

* fix(ui): clarify hook takeover and localize MCP actions

Identify global and project hooks in sync previews, show full takeover guidance, and link project conflicts to their Hooks tab. Translate MCP pending actions using the existing locale keys.

* feat(mcp): name unapplied tool policy parts in the render preview

The dashboard's server editor needs to say which Agents cannot follow
part of a tool policy before the server is saved. The plan's notices
only cover saved servers, so each rendered target now carries the gaps
from toolPolicyGaps instead of the UI re-implementing the per-Agent rules.

Refs #140

* feat(ui): edit the portable MCP tool policy in the dashboard

Saving a server from the edit dialog rebuilt it from the form and
dropped its tools policy. The draft now carries tools, and a Tools
section edits exposure, allow and deny for every Agent at once. Tool
names can be loaded on demand from the saved server through the live
check, and each selected Agent that does not apply a part is named from
the backend's render preview.

Pi's other settings flag the adapter-only keys and the exposure fields
that Tools now owns, so the form refuses what the backend refuses with
a message that points to Tools. Rows show a short policy marker, and the
plan's tool policy notices are localized on the MCP page.

Refs #140

* feat(mcp): save the config without retired settings on sync

Notices about settings 0.23.0 retired (piExtension, piOptionsPrune,
adapter-only piOptions, Pi switch entries, directTools/includeTools/
excludeTools) only went away when the user happened to save MCP settings.
Sync never rewrote the source, so most users kept seeing them.

Loading already converts those settings in memory, so a sync now writes
the converted config back (global, per project, external source, CLI and
dashboard), after keeping the previous content in the file history.
Dry runs write nothing, and a failed save is reported after the Agent
files are applied. The plan carries `migrates`, so the dashboard's sync
runs MCP even when no Agent file changes.

The CLI notices are one short line per kind with each server named
once, and a sync prints the file it updated with its backup. The
dashboard no longer shows these notices: sync handles them with nothing
for the user to do, and tool policy gaps stay in the server dialog.

* fix(ui): catch MCP tool policy mistakes before saving

The empty "Other Pi settings" box showed a toolExposure example even
while Tools had a setting. That example is exactly what the dialog
refuses in that state, so it read as a saved value that went unflagged.
The example now leaves toolExposure out while Tools is set.

A Deny list that removes every tool Allow keeps was only refused by the
server, in English with raw field names. The Tools section now says so
in the user's language and disables Save; the server check stays.

* fix(ui): move Pi settings help into info tooltips

The Pi block stacked four lines of help under the exposure select, one
of them in raw config words (entry, toolExposure), which pushed the
fields apart. The help now sits behind keyboard-focusable info icons:
one on a new "Pi settings" heading, which keeps the official docs link
beside it since a tooltip cannot hold a link, and one on the exposure
label with a shorter, plain explanation. The line saying Tools sets the
exposure stays, because it explains why the select is locked.

* docs(mcp): describe Pi built-in only and the tool policy

0.23.0 dropped the Pi modes, the prune switch and directTools, and added a
portable tools policy (#140, #143). The MCP reference still told users to
pick pi-mcp-adapter and pass flags that now fail, and said nothing about
what the first sync does to an old config or which Agents apply which part
of a tool policy.

The reference now covers the tools field and flags with a per-Agent table
linked to each Agent's docs, the dashboard Tools section, Pi's built-in
files and options, and an upgrade section: what the first sync converts,
which adapter entries it removes, the config save with its migrate backup,
and what replaces each removed flag. The how-to, dashboard and backup pages
follow.

* docs(skill): teach the built-in skill the Pi and tool policy changes

Agents using the skill would still pass --pi-extension and --direct-tools,
which fail since 0.23.0, and would not know the tools policy or what a sync
does to a 0.22 Pi config. The MCP reference now matches the CLI; the
description is unchanged and stays within its size limit.

* test(mcp): cover Pi migration and the tool policy in the runbook

The runbook still exercised pi-mcp-extension, pi-mcp-adapter and
--pi-options-prune, all removed in 0.23.0. New steps check Pi built-in
cleanup, the first-sync conversion of a 0.22 config with its migrate
backup and untouched hand-written adapter entries, the removed-flag
messages, and what each Agent receives from one tool policy.

* docs(wiki): record the 0.23.0 MCP Pi and tool policy milestone

Keeps the design decisions and evidence limits of #140 and #143 (the
ledger-driven migration, the migrate backup, per-Agent translation rules)
where later work can find them without reading five phase reports.

* docs(i18n): mirror the Pi built-in and tool policy docs in four locales

The zh-Hant, zh-Hans, ja and ko MCP pages still described the removed Pi
modes and flags, and linked to anchors that no longer exist in English.
They now carry the tool policy, Pi, and upgrade sections with the English
anchors and dashboard labels taken from each locale's UI strings.

* feat(mcp): probe an unsaved server definition for the dashboard

Loading tools in the server dialog could only probe the saved config, so
editing a URL and clicking load tested the old address and surfaced a raw
"connection refused" for a server the user was already fixing. A new server
could not load tools at all until saved.

POST /api/mcp/probe runs the existing live probe on the definition in the
request, resolving env and header references as the saved-server check does,
and never saves or syncs. Failures carry an error kind (connect, timeout,
auth, protocol, command, unknown) so the dashboard can explain them in the
user's language and keep the raw text as detail.

* fix(ui): load MCP tools with the dialog's current settings

The Tools section now probes the connection as the form describes it, so
an edited URL or command is what gets tested and a new server can load its
tools before saving. Probe failures read as short localized messages with
the raw error behind Details instead of the probe's English text.

Loaded names are dropped when the connection fields change, since they may
no longer be this server's tools; editing Allow or Deny keeps them.

* docs(mcp): say Load tools probes the dialog's current settings

The MCP and UI references said the button starts the saved server and that
a new server must be saved first, which is no longer true.

* feat(ui): pick MCP tools from a loaded checklist

Typing exact tool names into allow/deny chip inputs made users guess
names the server already knows. The Tools section now loads the
server's tool list and lets users tick which tools the model gets;
unticking writes the exact name to deny, re-ticking removes it (and
adds it to a non-empty allow list), and rows removed by a deny
wildcard are locked with the rule named in a tooltip.

Wildcard and unlisted rules stay editable as chips in the same box,
and an outcome summary tells users which agents honor the list,
which honor it only partly, and which cannot filter tools at all, so
nobody assumes a filter applies where it does not.

* refactor(mcp): drop tools.expose in favor of Pi's own exposure

tools.expose only ever meant something to Pi, yet it sat in the
cross-Agent tool policy, locked Pi's exposure select whenever a policy
was set, and produced an "expose" gap for every other Agent. Pi's
exposure mode now lives only in piOptions.exposure: it can sit next to
a tool policy (only toolExposure still conflicts, since the policy
writes it), allowed tools inherit it, and pi-mcp-adapter's directTools
migrates to it. The flag and field were never released, so they are
removed without a shim.

The dashboard now describes a policy in plain words ("2 tools
excluded") instead of the old "2 denied" shorthand, shows Pi's
exposure on the server list in words, hints that Enter adds a rule,
and no longer leaves "{}" behind when an exposure is set and then
cleared.

* fix(hooks): make import a takeover and plans say what changes

A hands-on trial showed several rough edges in hooks management:

- Importing one per-event candidate such as claude-stop merged every event
  of the file into the entry, so unrelated hooks became managed.
- An imported hook then conflicted on the next sync as an "identical
  unmanaged hook" until --replace, although importing it was the takeover.
- Narrowing an entry was reported as "remove" of the whole file although
  only one event left it, and plans gave no event-level detail.
- A misspelled event such as Stopp was accepted silently and would never run.
- Rewriting a compact settings.json produced half compact, half indented
  JSON and left an empty hooks key Skillshare itself had added.

A name that matches a candidate now picks only that candidate. Saving an
import (Mutation.adopt) records the identical native registrations as the
entry's own even without sync, so the next sync adopts them in place; edits
made outside Skillshare afterwards still conflict. Changes carry added,
updated and removed events, and "remove" is reserved for an entry that leaves
the file. A per-Agent catalog of documented events, from each Agent's
official hooks reference, drives advisory plan warnings and is served at
GET /api/hooks/catalog. JSON edits keep the file's compact or indented style
and drop a hooks key once Skillshare empties the one it created.

* style(ui): keep clean theme switches and picked cards black and white

The clean theme is black-and-white only, so its on switches and picked
cards use ink instead of the green ok and blue accent colors. The playful
theme keeps its own colors.

* feat(hooks): return full file texts from the hooks preview

The dashboard can only show which Agent files a hooks change touches, not
what changes inside them. POST /api/hooks/preview now also returns files[]:
each native file the plan would change, with its current text and the exact
text sync would write, taken from the same plan apply writes from. Other
plan responses stay unchanged, and the route keeps the localhost-only guard.

* feat(hooks): manage Antigravity and Antigravity CLI hooks

Antigravity and its CLI (agy) are skills targets, but their hooks could
not be managed. Both read the same files, ~/.gemini/config/hooks.json and a
project's .agents/hooks.json, so they are one hooks Agent with
antigravity-cli and agy as aliases.

Antigravity's hooks.json maps hook names to blocks of events rather than
one event map. Each Skillshare hook becomes one block named after it, held
as a single owned element, so ownership, adoption, conflicts and restore
work as for the other Agents. Keeping the block's own name lets an import
take the block over in place; a same-named block Skillshare does not own is
a conflict until it is imported or replaced. Disabled blocks are not offered
for import, and edits keep the file's compact or indented style.

The event catalog lists the documented events (seconds timeouts), import
problems are no longer cleared before validation, and the schema and docs
cover the new Agent.

* fix(hooks): replace an edited registration in place

Acceptance found that --replace on a registration Skillshare owned but
someone edited outside appended a second copy: the edited one stayed in the
file, now unmanaged, next to the replacement. When the element at the
record's last written position is owned by no one, replace now overwrites it
there, for both an edit with --replace and 'hooks sync NAME --replace'.

Writing into a one-line array such as "Stop": [{...}] also mixed one-line
and indented layouts; elements written there now stay on that line. Import
candidate lists print an explanation shared by several rows once instead of
on every row.

* feat(ui): rebuild the hooks page around targets, the catalog and real diffs

Editing a hook meant typing event names from memory, repeating each
target by hand and saving JSON the dashboard could not check, and the
preview only listed actions without showing what would change in a
file. The backend now publishes each target's documented events and the
full before/after text of every file a preview touches, so the UI can
guide the whole flow instead of trusting free text.

- Event fields pick from the catalog with descriptions, and show the
  tool filter and timeout unit only where the target has them.
- An empty target tab offers to copy another target's commands, mapping
  events to their closest equivalent and converting timeout units, and
  says when an event has no counterpart.
- Native JSON gets completion, formatting and linting with the line and
  a suggested event, and never drops invalid text when switching back to
  fields; Cmd/Ctrl+S saves without syncing and Esc asks before
  discarding edits.
- The preview shows one card per file with event-level changes and a
  folded line diff that marks the user's own hooks as untouched.
- Import preloads each target's unmanaged hooks, saves only the checked
  ones with adopt so sync does not duplicate them, and keeps pasting as
  a secondary path.
- Antigravity joins the managed targets, the wording says targets
  throughout, and the remove dialog no longer contradicts itself.

* fix(hooks): keep key order and separators when replacing an element

Replacing a registration in place re-encoded it from a Go map, so its keys
came out sorted, and on a one-line array it was minimized without the
spaces the line used: [{"hooks": [{"type": "command", ...}]}] turned into
[{"hooks":[{"command":...,"type":"command"}]}]. The whole line then showed
as changed and read as a rewrite of the user's style.

A replaced element now keeps the replaced one's key order at every depth,
with new keys at the end, and elements written on a one-line array use the
line's own spacing after colons and commas.

* feat(hooks): stop managing a hook while keeping its entries

Removing a hook from the source always queued the removal of its native
entries on the next sync, so there was no way to hand a synced or adopted
hook back to the user. MCP already has this as `remove --keep-files`.

`hooks remove NAME --keep-files` (and `unmanage` in the API mutation)
removes the entry and forgets its ownership records in that scope, so sync
neither removes nor updates what it wrote; the entries show up as unmanaged
and importable again. It is rejected with --sync, like MCP.

The dashboard remove dialog adds "Stop managing" and now says what each
choice does to the target files, including that "Remove from source only"
still deletes the entries on the next sync. Its backup note is neutral and
the dialog is wider to fit the diff.

* fix(mcp): warn that Pi's built-in MCP needs Pi 0.99.0 and no old extension

The first sync after upgrading moves Pi servers off pi-mcp-adapter and
pi-mcp-extension into Pi's mcp.json. A user still on Pi before 0.99.0
silently loses every server, because older Pi does not read that file, and
Pi's docs say an installed extension that registers /mcp replaces the
built-in MCP. Nothing told them either.

The plan now adds one notice, shown by preview, sync and --json, when it
removes an entry Skillshare wrote to mcp-adapter.json, rewrites an owned
entry in pi-mcp-extension's format (the transport field), or the config
still has settings only the extensions read. The ledger check covers a
config that owns adapter entries without saying piExtension.

* docs(mcp): say what Pi needs before the first 0.23.0 sync

The upgrade section described how the config changes but not the two
things a user must do in Pi: run Pi 0.99.0 or later, and remove
pi-mcp-adapter or pi-mcp-extension, which Pi's docs say replace the
built-in MCP. It now shows the sync warning, lists every dropped adapter
option, and says a disabled entry no longer turns a server off for Pi in
that project. The import paragraph claimed sync never changes
mcp-adapter.json; it removes the entries it wrote there.

* fix(ui): make hook diffs, editors and the hooks rail readable

Supervisor and user trial of the rebuilt hooks page found diffs that
read as "we will touch your hook", an editor too small for real hooks,
and text cut short in the rail.

- Diffs: removed lines red and added lines green through new diff theme
  tokens (the one colour exception in the clean theme), removals before
  additions, lines differing only by a trailing comma or whitespace kept
  as context, long lines wrapped, and the "left as is" marker on its own
  line. An adopt-only card says the file is unchanged.
- Editors: native JSON and code editors expand over the dialog and back
  as the same editor, so lint, completion, format, the error count and
  Cmd/Ctrl+S keep working; Esc closes completion first. The invalid-JSON
  explanation sits above the editor.
- Dialogs are 880px like MCP's.
- Main page: full target paths wrap under the name with no inner scroll
  box, the sync card shows the target file, empty descriptions are
  hidden, the unmanaged note avoids an orphaned character, and the row
  menu uses a hooks-specific "each target" label.
- Import names follow the CLI (<target>-<event>) or a script's basename.

* feat(ui): show MCP plan notices before a sync

The API returned the plan's notices, but no dashboard view showed them, so
dashboard users never saw that the 0.23.0 sync rewrites their config or
that Pi's built-in MCP needs Pi 0.99.0 and no old extension. The MCP sync
dialog and the Sync page now list them, translated through mcp.notice.*
keys; a notice the UI does not know is shown as the server sent it.

* fix(install): default CLI installs to the user-local bin directory

Use ~/.local/bin so ordinary script installs and upgrades do not require administrator access. Preserve INSTALL_DIR overrides and existing installations, verify the installed binary directly, and show PATH setup only when needed.

Add offline installer regressions and align installation guidance across all five documentation locales, including automation PATH setup.

Validation: seven offline installer cases, make check in the devcontainer, all five website locale builds, and AI context checks passed.

* fix(ui): let stop managing succeed and open the source config from the header

Stop managing sent a mutation whose plan differs from the removal preview the
dialog had loaded, because the server forgets the ownership records first, so
the revision never matched and every attempt failed as stale. Both the hooks
and MCP remove dialogs now preview that mutation before saving it; it writes no
target file, so there is no diff to review. Its toast also says the entries
stay in the files instead of "Removed".

The source path line under the lists took space most people never read. A
config.yaml button in the page header now shows the full path on hover and
opens the Config page editor; a separate sources.mcp file has no editor there,
so that case copies the path instead.

The Pi chip on a server row no longer mentions other Pi settings.

* test(server): replay the dashboard's hooks and MCP requests against the handlers

UI tests mock the API with one fixed revision, so a dialog that saves with a
revision from the wrong preview passed every vitest while "Stop managing"
failed in real use. These tests send the exact mutation JSON and preview
revision each dialog uses (remove, stop managing, edit, toggle, takeover,
import/adopt, restore, global and project sync) in global, hooks.projects
or mcp.projects, and project-mode scopes, and pin that hooks refuses an
unmanage saved with the removal preview's revision.

* fix(ui): show comma-only line changes in the hooks diff

A line that only gained or lost a trailing comma was shown as unchanged
with its new text, so the preview hid a real byte change to the file.
Lines still align ignoring the comma, so an added sibling does not shift
unrelated lines, but a differing pair now shows as removed and added,
removals first within each change. The user's own event keeps its
"left as is" note on the new line.

* fix(hooks): name the events a Copilot hook file changes

Copilot keeps each hook in its own file, so its plan changes carried no
events and the preview card showed only the action while every other
Agent listed "+ SessionStart" and the like. The planner now compares the
file's hooks map before and after the write and reports added, updated
and removed events the same way shared files do.

* feat(ui): open config.yaml at the section the header button came from

The config.yaml button on the Hooks and MCP pages opened the editor at
the top, leaving the user to scroll for the part that page manages. It
now links to /config?section=hooks or ?section=mcp, and the Config page
puts the cursor on that top-level key and scrolls it into view once the
file is loaded. A config without the key opens at the top as before.

* fix(ui): say what hooks and MCP dialogs will really do

Trying hooks across eight targets showed several places where the
dashboard hid or misstated the outcome:

- Remove and sync writes every pending change of the scope, but the
  hooks and MCP remove dialogs only named the removed entry; they now
  name the other hooks or servers that go out with it.
- With more than three targets, each remove choice spelled out every
  target; it now gives the count.
- Preview cards shrank to their header in a long list and hid the diff.
- A hook's summary listed SessionStart and sessionStart as separate rows
  with no hint of which target runs which; rows now merge case-only
  differences and show their targets' icons.
- Save and sync used the same toast as a plain save.
- The copy panel promised the closest events even when a target had
  none; it now says those events must be picked by hand.
- The Hooks rail's expandable target rows had no accessible name.

* fix(ui): pair hooks diff lines only at the same indentation

Diff lines were aligned ignoring leading whitespace, so appending an
event paired the file's closing braces with braces inside the new block.
Once differing pairs show as removed and added, that turned one comma
change into a run of removed closing braces. Only the trailing comma is
ignored now, so the diff shows the comma pair and the added lines.

* fix(ui): explain each hook removal choice on its own button

The three consequence lines sat in the dialog body, away from the buttons
they describe, and made the dialog long when a hook reached many targets.
Each explanation now shows as a tooltip on its footer button, on hover and
keyboard focus, and is wired through aria-describedby for screen readers.

Tooltip placed button-anchored tips that did not fit below using the
cursor offset, so a two-line tip covered the buttons; it now flips above
the anchor. It also shows nothing without content, which lets the dialog
keep its buttons mounted while the preview loads.

The CJK strings dropped the space between the target text and the
particle, which read as "8 個目標 的".

* fix(hooks): delete the files and folders a removed hook leaves empty

Syncing a hook to an Agent whose hooks file did not exist, then removing
it, left shells behind: `{}` in Claude, Codex, Gemini, Qwen, Droid and
Antigravity files, `{"version":1}` for Cursor, and empty folders such as
~/.copilot/hooks and ~/.pi/agent/extensions. They look like user
configuration and confuse the next import or review.

The ledger now records the shared files Skillshare created and the
folders it made for its outputs. When removal leaves a created file with
nothing but that skeleton, the plan deletes it and says so, and the file
diff shows the deletion. Files and folders that existed before, settings
or comments the user added, and non-empty folders all stay. Apply checks
the skeleton again, so settings added after the preview keep the file.

* fix(hooks): note Copilot's folder trust and use Pi's current package

Running Copilot CLI against a synced project showed that .github/hooks
is skipped until the folder is in trustedFolders, while COPILOT_HOME
hooks run anyway; the Copilot note was the only command Agent note that
did not mention trust. Pi's extension docs now import ExtensionAPI from
@earendil-works/pi-coding-agent, so the hook template follows them. The
old name still loads because the import is type-only, but editors no
longer resolve its types.

* test(hooks): run synced hooks in real Agent CLIs

Unit tests only prove Skillshare writes the native files we believe are
right. This runbook syncs a marker-writing hook for each Agent, starts
the real CLI once per scope with a throwaway HOME and fake credentials,
and checks the markers, so a format or location mistake shows up as a
missing marker. Antigravity and Cursor check credentials before any hook
runs; the runbook lists how to confirm them by hand.

* fix(hooks): write the hooks section in block style

yaml.v3 encodes an empty mapping as flow `{}`, and entries added to it
inherit that style, so the first hook saved after the section was emptied
landed on one unreadable line in config.yaml. The section is now expanded
before it is written, like the MCP section, which also unfolds entries an
earlier save left on one line.

* fix(ui): let Beautify unfold nested one-line YAML

Beautify kept flow collections as written, so a hooks or MCP section
squeezed onto one line stayed that way and the button reported nothing to
change. It now expands flow collections that nest others, and everything
inside them, while short lists such as `targets: [claude, codex]` stay on
one line. Saving still keeps the user's flow style.

* fix(ui): show hook targets once and light them up per event

Each event line repeated its own row of target icons under the header's
icons, and two rows of logos stacked on the right read as clutter. The
header now shows the targets as one overlapping stack, and hovering an
event line fades the targets it does not run on. Screen readers still hear
each line's targets.

* fix(ui): document the hooks section in the config editor

The field panel labelled every key under hooks as an unknown field, which
suggested the section was a mistake. It now explains hooks, its entries,
bindings, events, code, files and projects like the MCP keys.

* docs(hooks): describe the config editor and Copilot folder trust

The hooks page now writes its section in block style, opens the config
editor at hooks:, and the field panel and Beautify understand the
section; none of that was documented. Running Copilot CLI also showed that
project hooks in .github/hooks load only in a trusted folder, which the
destinations section did not say.

* docs(changelog): add 0.23.0 entry

Records native hooks, the MCP tool policy, the dashboard work around both,
and the Pi built-in MCP breaking changes, so users upgrading from 0.22.2
know what moves on their first sync.

* fix(server): validate hooks when the config editor saves

The config editor kept the hooks section as an opaque node and never ran
the hooks checks, so a malformed binding saved successfully and then broke
the Hooks page and `sync --all` until the YAML was repaired by hand. A
project config could also gain `hooks.projects`, which only the global
config may hold. Saving now rejects both with the same message sync gives.

* fix(hooks): keep an Antigravity block's name when importing it

An Antigravity hook is the named block in hooks.json. Importing one under
another name, through `hooks import --from agy NAME` or a renamed row in the
dashboard, planned a new block and left the original unmanaged, so both
ran. Such a takeover is now a conflict that asks for the block's own name,
and the import dialog keeps that name fixed for Antigravity rows.
2026-10-01 02:24:24 +08:00
Willie 445ace98ca docs(hub): describe the current Hubs page flow
The hub-index guide and the ui reference still described the old Browse /
My hubs tabs with New Hub, Save draft and Download index, and an in-dialog
Hub manager, none of which exist anymore. Readers following them could not
find the controls.

Rewrite the Web Dashboard section in all five locales around Add or create
a Hub, Add skill, Save, Share -> Download skillshare-hub.json and the hub
add command, using each locale's dashboard labels. Drop the stale
hub-builder-draft.png screenshot, which shows the removed UI.
2026-09-30 16:38:28 +08:00
Willie ab183449ea docs(mcp): describe the reorganized MCP dashboard
The MCP page moved Check and Backups and restore into the Sync box under
Sync MCP, and the "Turn off a global server" button now sits beside the
Servers heading in project mode. Project MCP tabs gained their own Check,
and a Pi server's dialog now starts on the built-in MCP mode. The docs
still named the old places, so readers looked for buttons that had moved.
2026-09-30 16:12:54 +08:00
Willie 88855431dd docs(mcp): describe the built-in Pi default
The Pi section told scripts to always pass --pi-extension and said new
setups "can choose" builtin, which no longer matches: mcp add, mcp import
and the dashboard dialogs now store builtin for a new server that reaches
Pi without a mode. Say so, note that the default does not follow other
servers' mode, and keep the ja, ko, zh-Hans and zh-Hant pages aligned at
the same positions.
2026-09-30 15:09:31 +08:00
Willie be18505dae fix(completion): complete missing subcommands and flags
The five completion scripts are hand-written and had drifted from the
CLI's argument parsing. Some entries sent users down paths that no longer
exist: `backup restore` backed up a target named "restore", `extras mode`
only printed help, `install --source` failed as an unknown option, and
`hub index --audit-skills` was rejected because the flag is `--audit`.
pull, push and commit were offered -p/-g, which they ignore.

Those stale entries are gone, and the scripts now complete:
- backup files list/show/restore, audit rules disable/enable/severity/
  reset/init, ui start/stop, mcp edit (bash, PowerShell, Nushell)
- sync scopes and the `agents` kind keyword where commands accept it
- flags the CLI parses but no shell offered, among them sync --quiet,
  status --json, new/search flags, enable/disable --kind, backup
  --delete/--all, restore/trash --all, ui --base-path/--clear-cache/--app,
  hub add --label, hub default --reset, mcp --disabled/--keep-files,
  analyze --verbose/--filter, init --git-root/--visible/--config and
  the extras subcommand and `extras <name>` flags
- fish: the target filter flags, --agent and --config-dir, and restore

PowerShell also stops swallowing a flag typed as the second word for
commands that have a subcommand list, so adding list, sync and the other
kind-aware commands to that table keeps their flag completion.

The completion reference page in every locale listed the stale
subcommands; it now lists the current ones.
2026-09-30 15:08:35 +08:00
Willie 3c2d0a169e docs(mcp): document mcp check --live
--live is the first command that starts a server or calls one, which
the reference and the built-in skill both described as something
Skillshare never does. Readers need to know what it runs (the server
command, with their environment), how it falls back for servers older
than 2026-07-28, what a 401 reports, the timeout, the live JSON object,
and that the dashboard check stays static.

Refs #141
2026-09-30 14:38:54 +08:00
Willie cbf5fc06a4 docs(mcp): cover project servers in mcp check
The mcp check section said servers under mcp.projects were not checked,
which is no longer true. It now explains that the global config's project
servers are checked in their root, how names select across scopes, how a
project server's heading reads, the new project field in --json, and that
the dashboard's MCP page leaves project servers out.
2026-09-30 13:49:07 +08:00
Willie 9bd5c158f1 docs(mcp): mention the dashboard check and the subject field
The JSON report gained a subject field and the MCP page gained a Check
button; the command reference should describe both so the docs match
what the code does.
2026-09-30 13:36:25 +08:00
Willie c523b940c5 docs(mcp): document mcp check
Users and agents need to know what the check verifies, which findings fail
it, and the JSON shape scripts can rely on. English only; translations are
left for a follow-up.
2026-09-30 13:35:57 +08:00
Willie c4ab37a0a2 feat(mcp): support Pi built-in MCP
Support Pi 0.99.0 built-in MCP alongside existing adapter and extension modes, with mode-aware paths, imports, and per-server options.

Preserve custom native settings and remove cleared options only when explicitly requested and ownership is unchanged. Align CLI, dashboard previews, exposure controls, and localized documentation; simplify complex MCP components.

Add regression coverage for import dialects, escaped values, mode selection, option pruning, conflicts, and migration previews. Verified in the devcontainer with Go vet and tests, MCP integration, make check, UI build and 527 tests, five-language website build, and ai-context validation.
2026-09-30 13:35:33 +08:00
Willie cefa7c50ee fix(server): report a sync where every target fails instead of a 500
When every skills target failed, including when every target's settings
were invalid, the dashboard sync returned 500 with only the first error.
The page lost the failed list and its explanations, agents were never
synced, and the dashboard's extras and MCP steps did not run. The sync
now finishes like any partial failure: it returns 200 with every target
in `failed`, and the operation log still records it as `error`.
2026-09-30 03:42:47 +08:00
Willie 4b0fbe680e feat(ui): explain common sync failures in plain words
A failed target showed only the raw error, such as "mkdir ...: not a
directory", which says what the OS refused but not what to do. The
result panel now adds a one-line explanation for the common causes: a
symlink pointing elsewhere, permission denied (including Windows'
"Access is denied"), a read-only file system, a file where a folder
belongs, a missing path, and a target skipped for invalid settings
(the new "config" part). Unknown errors keep the raw text only.
2026-09-30 03:30:52 +08:00
Willie 5dfd63d5e9 fix(sync): fail only the target whose config is invalid
Any per-target config problem, such as a skills path that is a file or
an unknown mode, made `skillshare sync`, `sync -p` and the dashboard
refuse to sync anything. That contradicts the policy that sync runs
every target and reports the ones that failed. Sync now validates the
config as a whole first and still stops on global problems (source,
global mode or naming, git_root, extras); a target whose own settings
are invalid is skipped for skills and agents and reported as failed
("invalid config" in CLI output and --json details, part "config" in
the dashboard's failed list). Config validation on save is unchanged.
2026-09-30 03:27:20 +08:00
Willie cf12f33eff feat(ui): list failed sync targets apart from warnings
A dashboard sync that lost a target reported it only as a warning
string, next to backup notes and prune hints, under a "Sync complete"
toast, so a partial failure was easy to miss and nothing said how to fix
it. The sync API now returns a "failed" list (target, part, error, the
matching warning text, and whether a symlink conflict caused it);
"warnings" is unchanged. The Sync page shows failed targets first with
their part and error, offers Turn on Force for a symlink conflict,
marks the target in the change list, and toasts a warning instead of
success.
2026-09-30 03:08:55 +08:00
Willie 7fd9a8fe40 docs(ui): describe what the Sync page shows when a target fails
Since 191bdec3 a dashboard sync keeps going after a skills target
fails, but the Sync row only described the happy path. It now says what
the page actually shows: failures as warnings with the run marked
partial, an error when every skills target fails, and an extras failure
that stops before MCP is written.
2026-09-30 02:57:48 +08:00
Willie d741baf333 docs: document unreadable git status and translate recent command changes
uninstall now fails a tracked repo whose git status cannot be read
unless --force, but the command page and built-in skill still described
only the uncommitted-changes check. The recent list, status, sync,
update and uninstall changes were also English-only, while this site
updates every locale alongside the English page.
2026-09-30 02:47:18 +08:00
Willie 880dad5c22 fix(status,list): show unreadable git status as unknown instead of clean
status and list discarded the error from the uncommitted-changes check,
so a tracked repo whose git status could not be read was shown as
up-to-date. They now show it as unknown with a warning naming the repo
and error; status --json sets the existing status and message fields.
The commands still succeed, since they only report.
2026-09-30 02:26:24 +08:00
Willie 0793ebe3c6 fix(update): fail tracked repos whose git status cannot be read
update discarded the error from the uncommitted-changes check, so a repo
whose git status could not be read was treated as clean and pulled over
whatever local edits it had. It now fails that repo with "failed to check
git status: <err>" unless --force, matching uninstall and the Web API.
Batch update counts these as failed instead of skipped and exits non-zero.
2026-09-30 02:22:48 +08:00
Willie 035ab61859 fix(sync): count extras target failures in sync --all and the Web API log
`sync extras` already exits non-zero and logs "partial" when a target
fails, but `sync --all` only printed a warning and exited 0, and its
--json path ignored extras errors entirely. The Web API always logged
"ok". Both now follow the CLI: `sync --all` exits non-zero on an extras
failure in text and JSON, global and project, without holding back MCP;
the Web API oplog records the error count with status "partial", or
"error" when every target that ran failed. The HTTP status stays 200.
2026-09-30 02:11:01 +08:00
Willie 2a00b6f5d4 docs: describe taking over matching MCP entries and extra name defaults
The MCP guide still said an Agent's existing server always shows as a
conflict once added to the source; a matching one is now taken over on
sync. The Extras reference now says a single file's name follows its
file name until one is typed.

Refs #303
Refs #300
2026-09-29 15:35:58 +08:00
Willie fd3bc824f3 feat(targets): edit other files a target's tool reads from its page
Pi and OMP read APPEND_SYSTEM.md next to their skills, and editing it
meant leaving the dashboard. A target page now shows extra file tabs:
built-in ones come from targets.yaml `files:` (APPEND_SYSTEM.md for pi
and omp), and users can add their own, including files in subfolders.
Paths stay inside the tool's folder; three tabs show and the rest move
to a menu. "Share with Extras" opens Add extra prefilled with the file's
folder and name, so the same file can be shared across tools.

A single-file extra's name now defaults to its file name without the
extension (APPEND_SYSTEM.md -> APPEND_SYSTEM) until the user types one,
and the hint suggests the file name, as the #300 reporter asked.

Refs #301
Refs #300
2026-09-29 15:25:06 +08:00
Willie 0aa6900050 fix(mcp): take over an Agent entry that already matches on sync
Importing a server from an Agent without ticking that Agent, then ticking
it later, left the Agent's entry unmanaged for good: the plan reported it
as unchanged, recorded no ownership, and so unticking the Agent had
nothing to remove. Nothing on the page said why, because the server's
name was now defined in the source.

Such an entry is now planned as adopt. Sync records it as managed without
rewriting the file, so the takeover is visible in the preview and happens
only when the user syncs. A server the person turned off in the Agent
itself is still never claimed.

Refs #303
2026-09-29 15:23:07 +08:00
Willie 5530aaebe5 docs(sync): explain the warning for targets that undo each other's sync
sync now names two targets that write one folder with different filters,
but nothing told users searching for "sync keeps showing the same
changes" why it happens or how to fix it. The troubleshooting page covers
the symptom, the sync filter notes say shared folders need matching
filters, and the built-in skill points agents at the printed command.
2026-09-29 12:13:15 +08:00
Willie e48784f16b feat(sync): name targets that sync one folder with different filters
When two targets sync skills into the same folder with different include
or exclude filters, each sync adds what one wants and prunes what the
other filters out, so the folder never settles and sync keeps showing the
same changes. The only hint was a vague overlap count.

sync, doctor and the dashboard's Sync page now name the targets and the
folder, and suggest turning skills off for all but one (universal when it
is among them) instead of removing a target. The Sync page offers the
existing stop-syncing dialog in place. Targets with identical filters are
not reported.
2026-09-29 11:45:48 +08:00
Willie 4c5ba72f38 fix(ui): say a tool finds duplicate skills instead of showing them twice
Pi keeps the first skill with a given name and warns, and Gemini, Amp and
others pick one by precedence, so telling users every skill "shows up
twice" was wrong for most tools. The notes and docs now say the tool finds
each skill twice, which holds whether it lists both or keeps one.
2026-09-29 11:45:39 +08:00
Willie d757afbb61 feat(extras): let several single-file extras share one source folder
A single-file extra added from the dashboard with the shared source got
<extras dir>/<name> as its folder, so a second file in the same folder
needed the same name and was refused as a duplicate. Project mode had no
source setting at all, so it could never share a folder.

The add dialog now has a source folder field that defaults to the name,
and project extras accept a source relative to the project root, from the
dashboard and from `extras init -p --source`. Paths shown for single-file
extras also keep the folder's own separator, so Windows paths no longer
mix backslashes with a slash before the file name.

Refs #300
2026-09-29 09:43:29 +08:00
Willie d9c55a5d4b docs(target): document switching skills off per target
Covers `--skills`, `--no-skills` and `skills.enabled`, what each sync mode
does to the folder when skills go off, and the dashboard switch, so users
of a tool that reads another target's folder know how to avoid duplicate
skills.
2026-09-29 05:13:06 +08:00