Zed added agent-skills support in vercel-labs/skills v1.5.8, using the
universal ~/.agents/skills (global) and .agents/skills (project) paths with
a flat-only skill layout. Register it as a built-in target and document it.
Since Zed shares the universal .agents/skills project path, it is auto-grouped
under the universal target by GroupedProjectTargets(); the docs note reflects
this. Verified in devcontainer: internal/config tests pass and zed resolves
via KnownTargetNames().
Previously 'skillshare init --git-root <scope>' on an already-initialized
setup either errored with 'already initialized' (no --remote) or warned and
ignored the flag (with --remote), so there was no non-interactive way to
change the scope after init — only the web UI or a manual config edit.
handleExistingInit now treats 'init --git-root <scope>' (without --remote) as
a headless scope switch via switchGitRootScope: it inits a repo at the new
scope directory (reusing one already there, sharing doGitInitIfAbsent with the
fresh-init and server paths) and persists git_root. It does not relocate an
existing repo — switching scope means 'version a different directory', not
'move history'. Combined with --remote the flag still falls through to the
remote path, now pointing users at the standalone form instead of a bare
'ignored' warning.
Update the mismatch guidance to offer 'skillshare init --git-root <scope>' as
the first fix, and revise the git_root docs (configuration + init) to document
the headless switch, superseding the earlier 'must re-run init / not supported'
wording. Add TestGitRoot_SwitchScopeAfterInit.
The mismatch guidance told users to re-run 'skillshare init', but init warns
and ignores --git-root once a repo already exists, so it never relocates the
repo. Reword the CLI message to state the real options: run 'git init' at the
new scope dir for a fresh history, or 'mv <old>/.git <new>/.git' to keep
history, or set git_root to match the existing repo.
Add a 'Changing the scope after init' section to the git_root config reference
and point the commit/push/pull pages at it, replacing the same misleading
're-run init' phrasing.
Cline's official docs (docs.cline.bot/features/skills) list only
.cline/skills (project) and ~/.cline/skills (global) as supported skill
directories. The previous change to ~/.agents/skills was based on the
incorrect assumption that Cline scans the universal .agents/skills path,
which it does not.
Restore cline paths to:
- global: ~/.cline/skills
- project: .cline/skills
Also remove cline from the universal-grouping sentence in the website
target reference, since cline no longer shares the .agents/skills root.
Existing users with cline enabled should manually remove stale cline
entries under ~/.agents/skills after upgrading.
Add azure_hosts config parameter (analogous to gitlab_hosts) that allows
users to register self-hosted Azure DevOps Server hostnames so they
receive proper URL parsing without appending .git to clone URLs.
- Add AzureHosts field to Config and ProjectConfig structs
- Add SKILLSHARE_AZURE_HOSTS env var support with merge semantics
- Generalize hostname validation into shared normalizeHostList/mergeHostsFromEnv
- Add azureOnPremPattern regex and parseAzureOnPrem for /_git/ URL routing
- Add isAzureHost for config-based host detection (no auto-detect)
- Update TrackName to handle on-prem Azure DevOps clone URLs
- Wire AzureHosts through InstallContext, ParseOptions, and Server
- Add JSON Schema, UI fieldDocs, and website documentation
- Add 19 new tests covering config, source parsing, and server
Closes#147
Add AiderDesk, CodeArts Agent (Huawei), Code Studio (Syncfusion),
Devin for Terminal (Cognition), Dexto, ForgeCode, Rovo Dev (Atlassian),
and Tabnine CLI as built-in targets (56 → 64).
Update Cursor's project-level skill path from .cursor/skills to
.agents/skills to match Cursor's official documentation, which now
lists both paths as supported with .agents/skills as the ecosystem
standard convention. Global path (~/.cursor/skills) and agents paths
are unchanged.
All paths verified against official documentation or source code.
Codemaker excluded — no official docs confirm SKILL.md support.
The agents_source field was already implemented but had no
documentation, unlike extras_source which was fully documented.
- Add agents_source to Full Example in configuration.md
- Add dedicated agents_source field reference section
- Add Custom Source Directory section to understand/agents.md
- Note agents_source in Skills vs Agents comparison table
Add per-target target_naming setting that controls how skill directories
are named in sync targets. 'flat' (default) preserves the existing
flattened __ separator behavior. 'standard' uses the SKILL.md name field
directly, following the Agent Skills specification.
Standard mode:
- Validates SKILL.md names match directory basenames
- Detects and skips name collisions with warnings
- Auto-migrates managed entries when switching from flat to standard
- Preserves legacy entries when bare name is already occupied
Also includes:
- Per-target toggle via CLI (--target-naming), TUI (N key), and Web UI
- Collision output redesigned as deduplicated compact summary
- Config inheritance: global target_naming → per-target override
- JSON schema + UI validation for the new field
Closes#110
Extras source dir is under extras/ subdirectory (~/.config/skillshare/extras/<name>/),
not directly under the config root. Also, sync extras and the extras config field
both support project mode — removed incorrect "global only" admonitions.
- extras.md: fix source path references and example output
- sync.md: replace global-only admonition, fix directory structure diagram
- configuration.md: fix source path, add extras/ to overview tree
- index.md: add Extras Management category with extras command
JihuLab (jihulab.com) is a GitLab distribution that supports nested
subgroups but its hostname doesn't contain "gitlab". Add "jihulab" to
the built-in host detection so URLs like jihulab.com/group/sub/project
are parsed as full-path repos without requiring gitlab_hosts config.
Support CI/CD pipelines that need gitlab_hosts without a config file.
The env var is comma-separated and merged (deduplicated) with config
file values in both global and project modes.
Also cleans up from review:
- Extract isValidGitLabHostname to share validation logic
- Remove redundant ToLower before EqualFold in isGitLabHost
- Revert 3 no-opts call sites back to ParseSource()
- Add parseOptsFromProjectConfig helper to reduce inline duplication
- Fix project mode LoadProject missing env var merge
- Add install.md tip about custom GitLab domains
Self-managed GitLab instances on custom domains (e.g., git.company.com)
without "gitlab" in the hostname were parsed with 2-segment owner/repo
split instead of full-path repo. Users can now declare extra GitLab
hostnames in config so the parser treats them like gitlab.com (nested
subgroup support).
- Add `gitlab_hosts` field to both global and project Config structs
- Validate entries at load time (reject scheme, path, port, empty)
- Add `ParseOptions` / `ParseSourceWithOptions` to thread hosts into parser
- Add `isGitLabHost()` helper combining built-in + custom host detection
- Extend `InstallContext` interface with `GitLabHosts()` method
- Update all ParseSource call sites (install, search, update, server)
- Add JSON schemas for both config files
- Add unit tests for config validation and source parsing
- Add E2E runbook for devcontainer verification
- Document in configuration reference and URL formats appendix
The 1294-line audit.md mixed command reference, conceptual teaching,
rule management, and CI/CD recipes. Split into:
- understand/audit-engine.md — threat model, detection rules, risk
scoring, command tiering, cross-skill analysis
- reference/commands/audit-rules.md — rule management, custom rules,
built-in rule IDs table (adds 4 cross-skill finding IDs)
- how-to/recipes/ci-cd-skill-validation.md — absorb output format
docs (SARIF, Markdown, JSON+jq, exit codes)
- reference/commands/audit.md — slim to ~370 lines, link to new pages
Also fixes:
- Replace ghost rule `system-writes-0` with `insecure-http-0` in all
docs (the old ID no longer exists in rules.yaml)
- Update 3 cross-page links in security.md
- Update 1 rule ID in configuration.md
- Add sidebar entries for both new pages
- Change universal description from "(recommended)" to "(shared agent directory)"
in detect, checklist, and discover flows
- Add FAQ section on using universal alongside npx skills: merge vs copy mode
differences, name collision caveats, lock file visibility
- Add universal info admonition to supported-targets page
- Add E2E runbook for universal target path verification
- Update CHANGELOG and release notes for v0.16.4
The universal target pointed to ~/.config/agents/skills (wrong) instead
of ~/.agents/skills, causing `npx skills list` to miss synced skills.
Also auto-recommend universal as a target whenever any CLI is detected
during `init` and `init --discover`, since ~/.agents/ won't exist on
disk until skillshare creates it.
Closes#54
Add Verdent (verdent.ai) as a built-in target with standard skill paths.
Update target count from 49+ to 50+ across README, homepage, and docs.
Sync changelog and release notes with the new target entry.