mirror of
https://github.com/runkids/skillshare.git
synced 2026-11-19 02:17:09 +00:00
2e22257520c3cc32993369b6dedbbb1fda75fa6e
17
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
7b952c02a9 |
fix(update): honor accepted findings in dashboard tracked updates (#599)
* fix(update): honor accepted findings in dashboard tracked updates The dashboard ignored findings accepted through the CLI, so a tracked repo that `update --force` let through was blocked again on the next dashboard update, and every dashboard Force Retry had to be repeated. Regular skill updates in the dashboard already honored and recorded acceptances, so only tracked repos differed. Tracked-repo updates now always honor accepted findings and record the ones an override lets through, for both callers. The opt-in option and the AuditGate flag it fed are removed, since no caller turns them off. Dashboard agent tracked repos passed an empty source dir, so a nested repo kept acceptances in its group folder under a different key than the CLI. They now pass the agents source, as the CLI does. * fix(update): reload the agents store after agent repo refresh Dashboard agent tracked repos now refresh metadata in the agents source, but a metadata change reloaded the skills store, leaving the agents store as it was until the next request. Reload the store that matches the source. Every caller of update.TrackedRepo now passes a source dir, so the empty-dir guard and its doc no longer describe a supported mode. The new agent test reuses the tracked fixture instead of rebuilding it. |
||
|
|
fe4fcba122 | Merge branch 'main' into runkids/arch-442-uninstall | ||
|
|
4c6d152abf |
refactor(uninstall): run the CLI and dashboard through one operation
The uninstall sequence (move-out check, dirty check, move to trash,
.gitignore cleanup, metadata prune) lived in the CLI and in three
dashboard handlers, and the copies had drifted: three different prune
rule sets, no dirty check on DELETE /api/repos, and no metadata prune
at all on DELETE /api/resources, which left the removed skill's entry
and target overrides in .metadata.json.
internal/uninstall now owns the sequence for resolved items. Callers
keep name resolution, prompts, output, HTTP status and oplog.
MetadataStore.RemoveByNames is the single prune rule set: an entry goes
when it is a removed path or lies below one, by key or by Group, plus
the tracked legacy group of a top-level repo.
Behaviour changes, all intended:
- DELETE /api/repos/{name} refuses a dirty tracked repo, or one whose
git status cannot be read, with 409 unless ?force=true.
- DELETE /api/repos/{name} refuses a followed link whose folder is
itself a skill, like every other uninstall path.
- DELETE /api/resources/{name} prunes the skill's metadata.
- Removing top-level "foo" no longer prunes "frontend/foo" (CLI), and
removing repo "_team" no longer prunes the untracked group "team"
(dashboard batch); both dropped metadata of skills still installed.
Refs #442
|
||
|
|
2edf7649fd |
refactor(update): update tracked repos through one shared operation
Updating a tracked repo is a fail-closed sequence: check for uncommitted changes, pull, audit what was pulled, reset to the pre-pull commit when the audit blocks. The CLI had two copies of the pull flow, the dashboard a third, and the audit gate existed four times (CLI, dashboard, and two in install). The copies had drifted: the dashboard ignored a failed git status and never refreshed root-skill metadata, and each copy worded a failed rollback on its own. update.TrackedRepo now owns the sequence and returns a structured result; install.AuditGate is the only gate. internal/update is a new package because internal/git already imports internal/install. The CLI keeps its spinner, rows and the "Apply anyway?" prompt, passed in as one Confirm callback; the dashboard turns the result into its JSON item. Behaviour changes, all towards the stricter copy: - the dashboard reports a failed git status as an error instead of pulling; - the dashboard refreshes root-skill metadata after an update, like the CLI; - a prompt that fails rolls the update back instead of leaving it applied; - the rollback-failed and rollback-unavailable texts come from one place. Accepted findings stay as they were (CLI honours and records them, the dashboard does neither), now as the explicit AcceptedFindings input. The "blocked and rolled back" texts are unchanged per caller because the dashboard matches on them. Refs #443 |
||
|
|
2d5ab6771c | Merge remote-tracking branch 'origin/main' into runkids/419-link-unlink | ||
|
|
1d66193749 |
Merge pull request #425 from runkids/runkids/422-mode-option-values
fix(cli): preserve mode flags used as option values |
||
|
|
5ee277a349 |
docs(wiki): describe sourcelink.Remove as the unlink flow
The developer rule still equated Remove with uninstall <link>, which is refused when the linked folder itself is a skill. |
||
|
|
e329f5d906 |
fix(cli): preserve mode flags used as option values
Pass value-taking options to the shared mode parser so command values cannot select a scope or create false mode conflicts. Preserve the end-of-options delimiter and reuse it for MCP command arguments. Cover existing CLI entry points, including audit rules, enable/disable, and backup deletion, with regression tests and document the parser contract. |
||
|
|
4ae67cbe52 |
feat(source-links): add link and unlink commands
follow_source_links only follows a link the user made by hand, so the guards (source or parent, sync target overlap, link chain) surfaced in doctor only after the link existed, and Windows users had to pick between a junction and mklink /D themselves. link checks the prospective target with Follow.Allow, which shares the guard rules and reason strings with the walk, before creating a junction on Windows or an absolute symlink elsewhere. It warns when the target is not a git checkout and leaves follow_source_links alone unless --enable is given. unlink moves only the link entry to trash, the same way uninstall removes a first-level link, so the target is never touched and trash restore undoes it. internal/sourcelink holds both operations so the dashboard can call them too. Refs #419 |
||
|
|
d61cea9ec7 |
docs: describe the link decision flow and writes through followed links
Wave 2 made writes behind a followed first-level link land in the real checkout, so the "current limits" paragraph written for the discovery-only version was no longer true. Replace it with the actual write semantics, add the walker decision flowchart the design discussion settled on, and record the sourcefs/sourcewalk policy contract in the CLI development topic. Refs #274 |
||
|
|
8c60f51b9f |
feat(source): add the sourcewalk walker and sourcefs write boundary for proposal 274 (#385)
Implements rollout steps 1 and 2 of proposals/274-skillfollow.md. Nothing follows a link or parses .skillfollow yet. Step 1: doctor reports first-level symlinks and junctions in the skills source as info, in text and JSON, without following them. Step 2a: internal/sourcewalk owns traversal of the skills source. Thirteen raw walks move onto it with identical behavior, and a go/parser ratchet fails the tests on any new unclassified walk. Step 2b: internal/sourcefs wraps an os.Root opened at the skills source and refuses any write whose path has a link component. The six write sites the proposal found in review move onto it, including the cross-device copy fallback, and a second ratchet covers raw os write calls. The only behavior change is that an explicit path crossing a link inside the source is refused instead of written through. Refs #274 Release-As: 0.24.3 |
||
|
|
355b42ee57 |
feat(cli): one frame and keymap for every TUI, inline prompts, file viewer (#370)
* chore(devcontainer): add a TUI screenshot kit Recreating the devcontainer wipes vhs and the browser it drives, so every TUI review started with a manual reinstall. The start script now installs the recording tools when they are missing and skips straight through when they are present. record-tui.sh screenshots each full-screen TUI in its own fresh ssenv, filled by tui-fixture.sh through real commands, so the TUI redesign can compare before and after on the same data. Refs #200 * feat(cli): ask small choices inline instead of full screen The restore source, new-skill wizard, install skill picker and the other checklist prompts each took over the whole screen for a handful of options, and the answer vanished once chosen. They now use the same inline prompt as init: the question appears in place, collapses into a "✓ label value" line, and stays in the scrollback. Lists longer than the visible rows can be narrowed with /, and esc inside the filter only leaves the filter. Every inline prompt shows one key line in the wording the full-screen TUIs will share. The new wizard drops its esc-goes-back steps: esc cancels, as in init. Refs #200 * feat(cli): give the list TUI the shared frame and keymap The full-screen TUIs each had their own header, footer and key letters, so the same action used different keys per screen and the help line listed everything at once. list is the first screen on a shared frame: one title line with scope, counts and tabs, the list and details side by side without dividers, and one key line with the common keys and the position. Everything else moves under ?, and confirmations ask on the key line so the list stays visible. Keys follow one lowercase letter per action (u update, d uninstall, t enable/disable, m manual only, ! audit). The All tab and the s status cycle are gone: tab switches skills and agents, and status: in the filter or --status covers enabled/disabled. Rows drop the group prefix that the heading above them already shows. Refs #200 * docs: drop key-by-key TUI instructions from command pages The command pages carried key tables, screen mock-ups and one bullet per key for every full-screen TUI, in five languages. The TUIs now show their keys on screen, so these pages repeated what the screen says and went stale with every key change (several already listed keys that no longer exist). Each TUI section is now one paragraph on what the screen shows and what it can do. What the screen does not explain stays: the filter tag syntax, what manual only does to SKILL.md, the analyze color thresholds, when audit opens its TUI, and that target changes are saved to config immediately. Refs #200 * feat(cli): move the trash TUI onto the shared frame The trash TUI replaced the whole screen with a confirmation and a spinner, so you lost sight of what you had selected, and r/d did nothing until something was ticked. It now uses the shared frame: checkbox rows with size and age, details beside them, and the confirmation, the names it covers, the running operation and its result on the bottom lines. With nothing selected, r and d act on the row under the cursor. Refs #200 * feat(cli): move the log TUI onto the shared frame Log rows were two-line "[date] COMMAND — status" blocks, stats lived behind s as a separate screen, and delete swapped the help bar for a prompt you could miss. Rows are now one line with time, command and a status mark; Entries and Stats are tabs on the title line next to the count and success rate; and the delete confirmation takes over the key line. With nothing selected, d deletes the entry under the cursor. Row delegates no longer force a 40-column minimum, which wrapped every row in lists narrower than that. Refs #200 * feat(cli): move the audit TUI onto the shared frame The audit TUI had its own tab bar, a divider column and a two-line summary footer, and esc quit even with a filter typed. It now uses the shared frame: scan counts and the Skills / Agents tabs on the title line, the worst severity at the right of each row, the scan-wide severity, threat and policy summary on the note line, and esc clears the filter before quitting. Rows under a group no longer repeat the group's name. Colored title facts keep their color instead of being dimmed. Refs #200 * feat(cli): move the audit rules TUI onto the shared frame The rules browser used keys no other screen shared: s for severity, space to toggle and R pressed twice to reset. It now follows the shared keymap: t turns a rule or pattern on or off, e asks for the new severity on the key line, and R asks yes/no before deleting audit-rules.yaml. The severity tabs sit on the title line, rows show the rule count or "off" at the right, and rule rows drop the pattern prefix the group row already shows. Space still toggles. When the title line is too narrow for every tab, it shows only the active one instead of clipping them. Refs #200 * feat(cli): move the analyze TUI onto the shared frame Analyze put the target switcher, a stats line and the help text in a three-line footer and sorted with s, which means sync everywhere else. It now uses the shared frame: skill count and always-loaded and on-demand tokens on the title line, one tab per target group, o to sort with the current order on the key line, and esc clears the filter before quitting. The details follow the list layout, and lint warnings use the ! mark the CLI uses. renderDetailSection and renderFactRow had no other callers and are removed. Refs #200 * feat(cli): move the diff TUI onto the shared frame The diff browser drew ruled separators, "── Next Steps ──" banners and an arrow before every suggested command, and esc quit with a filter typed. It now uses the shared frame: target, extra and difference counts on the title line, what differs at the right of each row, group rows like the list's, plain headings in the details, and esc clears the filter before quitting. Refs #200 * feat(cli): move the restore TUI onto the shared frame Restore replaced the whole screen for the confirmation, the running operation and the result, rendered two-line rows, and esc quit even with a filter typed. It now uses the shared frame: the target or the chosen target and its backup count on the title line, one-line rows with backup count and age or skill count and size at the right, and the confirmation, what it covers, the spinner and the result on the bottom lines. Esc clears the filter, then goes back, then quits. Refs #200 * feat(cli): move the MCP manager onto the shared frame and keymap The MCP manager used its own letters (a add, x remove, b backups, r refresh), hid the details behind Enter, and printed two help bars. It now uses the shared frame and the keys every other TUI uses: n add, i import, e edit, d remove, s sync, r restore, with the details of the selected server beside the list and ? for all keys. Refresh is gone because the manager reloads after every action. Command docs drop the key table, and the how-to page and built-in skill name the new keys. Refs #200 * feat(cli): move the search selector onto the shared frame The search selector rendered two-line checkbox rows, put the details under the list, used s for "search again" although s means sync everywhere else, and Enter with nothing selected silently cancelled. It now uses the shared frame with the keyword and counts on the title line, one-line rows with stars or risk at the right, and the details beside the list. Esc clears the filter, then goes back to the keyword prompt; Enter with nothing selected installs the row under the cursor, as r and d do in other TUIs. The command page drops its screen mock-up and key list, and no longer claims the search restarts after an install. Refs #200 * feat(cli): move the target TUI onto the shared frame and keymap The target TUI had five uppercase keys (M, N, I, E, R), a separate skills-or-agents picker before three of them, and full-screen pickers and remove confirmation. e now opens one menu of every setting the target has (skills mode, naming, include, exclude; agents mode, include, exclude, with agent filters marked as ignored in symlink mode), and the pickers and pattern editor open beside the list. d asks on the key line with the command it will run and what removal does. Patterns are added with n, as everywhere else. Also drops the filter style helper the MCP change left unused. Refs #200 * feat(cli): move the extras TUI onto the shared frame and keymap The extras TUI used six uppercase keys (N, X, S, C, M, F), each with its own full-screen menu, and a full-screen confirmation. It now uses the shared frame and keys: n new, d remove, s sync, c collect, and e for one menu with the mode and flatten setting of every target. The target menu and mode picker open beside the list, and confirmations ask on the key line with what the action does. The picker row helper moves to the shared frame, and the split and scroll-hint helpers no TUI uses any more are removed. Refs #200 * feat(cli): share one framed file viewer between list and extras The list and extras file viewers were two copies of the same layout with the old look: an indented title, a │ column between the tree and the file, and a hard-coded yellow cursor. Both now draw through one renderer in the shared frame: the skill or extra and the open file on the title line, the tree beside the file without a divider, and the scroll position at the end of the key line. Refs #200 * feat(cli): ask for a large repo's folder inline Installing from a repo with 50+ skills opened a full-screen folder browser with its own filter bar and key line, then dropped back to an inline skill checklist. The folder question is now an inline select like every other install prompt: the first choice installs everything below the current folder, esc goes up one level, and the chosen folder collapses into a "✓ folder" line before the skill list appears. The screenshot fixture gains a 60-skill repo so the picker can be recorded, and the filter-bar and page-info helpers that only the old picker used are removed. Refs #200 * feat(cli): ask for MCP and plugin values inline MCP and plugin values were typed into a separate textarea program that submitted on ctrl+d, a key no other prompt uses. They now go through a new ui.Text prompt drawn like the other inline questions: enter submits, alt+enter starts a new line, and the box grows with the value. The MCP name is a single line, so it uses ui.Input. Answers are not echoed afterwards because a value can hold a secret. Refs #200 * feat(cli): drop the full-screen MCP change preview Every MCP add, edit, remove, restore and sync already prints its plan inline and then asks whether to apply it. The full-screen preview in between showed the same changes again and needed one more enter, so it is removed along with the review step of the prompts interface. The confirm question loses its "Review complete" prefix, and a blank line now separates it from the plan. Refs #200 * feat(cli): ask extras init questions inline `extras init` without arguments ran its own full-screen wizard with a hand-drawn cursor and a different key line on every step. It now asks the same questions inline, like `init`: each answer collapses into a "✓" line, the target line shows where the file lands, and esc cancels with "Nothing was created". A new ui.InputValid keeps a question open and shows the error under it until the answer passes, which the name, file name and per-target file name questions need. Refs #200 * fix(cli): drop stale key hints from MCP prompts and help `mcp --help` still listed the manager keys from before its redesign (a add, x remove, b backups, r refresh), and several MCP and plugin questions repeated "Esc cancels" or claimed `a` selects all, while the key line under every prompt already shows the real keys (ctrl+a for all). The help now just says where the keys are, and the questions keep only what the key line cannot say. The MCP command page drops the same key list in all five locales. Refs #200 * feat(cli): open a skill's files at its audit findings The audit TUI listed each finding's file, line and one-line snippet, but judging whether a finding is real needs the lines around it, and that meant leaving the TUI to open the file by hand. Enter now opens the selected skill's files at its most severe finding, with the raw text numbered and the flagged line marked; n/N steps through the findings in the order the details number them, and the line above the keys says which finding is shown. The viewer state lives in a new fileBrowser so analyze and trash can open skills the same way. Long lines wrap under their text instead of being cut, since the evidence is often at the end of a line. Refs #200 * feat(cli): open a skill's files from analyze Analyze flags lint issues such as a description that is too short, but the screen only showed the description text, so fixing a skill meant finding its folder first. Enter now opens the selected skill's files, including local ones that live only in a target, as raw numbered text with the front matter, and the line above the keys repeats the first lint issue so it can be checked against what is written. Refs #200 * feat(cli): open a trashed item's files before restoring The trash TUI showed only the first fifteen lines of SKILL.md, which is not enough to tell two trashed versions apart or to see a skill's other files. Enter now opens the item's files in the same viewer as list and analyze, rendered as Markdown, and esc returns to the trash. Refs #200 * fix(cli): leave front matter out of the agent viewer in list Opening an agent in the list TUI rendered its whole file as Markdown, so the front matter came out as a horizontal rule and a "## name: ..." heading. Skills already drop it because the details panel shows the name and description; agents now read their body the same way. Refs #200 * test(cli): compare trash restore destinations home-relative The trash TUI shows restore destinations through shortenPath, so with HOME=/tmp, as in the offline Docker sandbox job, /tmp/skills prints as ~/skills and the tests that expected the absolute path failed. They now expect whatever shortenPath gives for the same path. Refs #200 * fix(cli): show control characters in viewed files as symbols The file viewers in list, extras, audit, analyze and trash wrote a file's bytes to the terminal as they were. Audit and analyze exist to inspect skills that may not be trusted, and a SKILL.md with an ESC or OSC sequence could rewrite the screen or the window title instead of being shown. Control characters are now replaced with same-width symbols such as ␛ before rendering, which keeps line numbers and the marked finding line in place; newlines and tabs are kept and CRLF is read as LF. Refs #200 * fix(cli): open audit findings in files the tree leaves out The file tree skips dotfiles and stops at three levels and 200 entries, but the audit scan reads root dotfiles and goes deeper. A finding in such a file, like a root .env, left the viewer on the previous file with the new finding's note above unrelated text. Opening a finding now adds its file to the top of the tree under its full relative path when it is missing, so the marked line is always the one reported. Refs #200 * fix(devcontainer): exit nonzero when a TUI screenshot fails to record record-tui.sh printed FAIL for a screen whose vhs run failed but still exited 0, so an unattended run looked like every screenshot was taken. It now remembers a failure, keeps cleaning up and recording the other screens, and exits 1 at the end. Refs #200 * fix(cli): keep other files' front matter and fit text to the pane Two problems in the shared file viewer: - It dropped YAML front matter from every Markdown file, so a trashed skill's README or template lost its metadata, which nothing else in the trash view shows. Only SKILL.md and a single-file agent drop it now, since their name and description appear in the details. - The open file was wrapped to at least 40 columns. In a narrow terminal that is wider than the right pane, so the layout wrapped each row a second time, breaking lines apart and moving the marked finding line. Text now wraps to the pane's real width. Refs #200 * fix(cli): keep frame lines within the terminal width joinEnds padded the title, confirm and filter lines but never cut them, so a long search query, path or command made the line wrap. Every TUI sizes its body for a fixed four lines of frame, so the wrap pushed the bottom of the body off the screen. Long text is now cut from the left side, keeping the status or tabs on the right. Lines are left alone until the terminal has reported its width. Refs #200 * fix(cli): show a nested skill's folder when no group heading names it List rows dropped the first path segment for every skill on the grounds that the group heading above shows it. With a single group, or a filter that leaves one, there is no heading, so frontend/react showed as just react and same-named skills from two folders looked alike. Rows now drop it only under a heading; a tracked skill's repo dir is still dropped as before. Refs #200 * fix(ui): let esc leave a prompt's filter after enter found nothing The inline prompt guessed the filter state from key presses and treated enter as leaving the filter. huh's Select stays in the filter when enter has no match, so the next esc, meant to leave the filter, cancelled the question instead: one folder level back in the large-repo picker, or the whole install at the top. The prompt now asks the field whether it is filtering. Refs #200 * fix(cli): show control characters in the trash preview as symbols The trash details panel prints the first lines of a trashed SKILL.md, and it wrote them to the terminal as they were. The file viewers already pass text through printableText so an ESC or OSC sequence in a skill is shown instead of acted on; the preview now does the same. Refs #200 * fix(cli): scroll an agent's text with the wheel anywhere in list An open agent has no file tree, but the wheel still treated the left quarter of the screen as the tree, so scrolling there did nothing. The whole screen now scrolls the agent's text. Refs #200 * fix(ui): read prompt answers after the prompt has run The prompt helpers returned "value, runPrompt(..., &value)". The Go spec leaves the order between reading value and the call unspecified, so a compiler may return the value from before the user answered. gc 1.25 runs the call first, so answers arrive today, but nothing guarantees it. Each helper now runs the prompt into err and then returns the value. Refs #200 * fix(cli): name hidden Unicode and skip oversized files in the viewer Two gaps in the file viewer used to inspect untrusted skills: - Zero-width and bidirectional characters passed through unchanged, although the audit reports them as HIGH (Trojan Source). Opening such a finding reordered or hid the text instead of showing the cause. They now appear as <U+202E> and the like. - Moving onto a file read all of it, then copied it again while numbering and wrapping, with no size limit. The audit skips files over 1 MB; the viewer now does too and says the file is too large. Refs #200 * fix(cli): show control characters in viewed file names as symbols File contents in the viewer already pass through printableText, but the tree and the title printed file and skill names as they were. A file named with an ESC sequence, a newline or a bidirectional character in a skill under review could still reach the terminal, or break the frame across lines. Names now go through printableName, which also shows a newline or tab as a symbol so the name stays on one line. Refs #200 |
||
|
|
d78e7ce09a |
feat(cli): redesign init and give every command one output style (#360)
* fix(install): omit the empty audit section in dry-run A dry-run skips the security audit, yet the single-skill path still printed the "Audit Findings" heading with nothing under it, which reads as if the audit ran and found an empty result. * feat(init): ask first, confirm a summary, then write The old init asked nine questions in three input styles and wrote files as it went, so cancelling midway left a half-built setup, and detection created tool folders even under --dry-run. Connecting a second machine to an existing repo was only offered at the very end, and the built-in skill defaulted to "no", which read as "not recommended" (#200). init now collects every answer into a plan, shows a summary with Yes / Change settings / Cancel, and writes nothing until confirmed. Esc cancels cleanly. A "Connect my existing skillshare repo" path checks the repo before writing, detects its layout, prefers the repo version of same-name skills and keeps local-only ones for the next push. The built-in skill is installed by default, and the first sync runs at the end so the tools work right away. Prompts use one inline huh-based component with theme colors. Without a terminal (CI, scripts, AI agents) init now applies the same defaults as pressing Enter and prints each decision with the flag that changes it, instead of silently doing less; init -p and --discover add the detected tools. Output that is not a terminal is plain text. BREAKING CHANGE: non-interactive `init` now enables git, installs the built-in skill and selects every detected tool; pass --no-git, --no-skill, --no-targets or --no-copy for the previous minimal setup. Piped or redirected output no longer contains ANSI colors; use --json where offered for machine-readable output. Refs #200 * docs(init): show the new init flow and the connect-a-repo path The getting-started page still described the old four-question wizard with a screenshot of it, the second-machine guide never mentioned the new "Connect my existing skillshare repo" choice, and the recipe told users to run pull and sync after init even though init now does both. Replace the screenshot with ones from the new flow, describe the questions, summary and cancel behavior, and explain what connecting a repo does before and after confirmation. The devcontainer example gains --no-git because init without a terminal now turns git on by default. Refs #200 * feat(devcontainer): seed fake tools and a repo with ssenv --seed Trying init by hand needed several manual steps to fake installed AI tools and a skills repo to connect. `ssenv create --seed` (and `ssnew --seed`) now creates claude/codex/cursor directories with a few skills and a local bare repo at ~/remote/skills.git, so both init paths can be tried at once. Refs #200 * fix(ui): skip the logo on 16-color terminals and hide the cursor while it plays `docker exec -it` sets only TERM=xterm, which reads as 16 colors: the logo was mapped onto the terminal's own palette and its fade-in collapsed into a few flickering cells. Below 256 colors the banner now prints only its text, and the devcontainer sets COLORTERM=truecolor. The visible cursor also jumped along the logo's left edge while frames redrew in place. It is hidden during the animation and restored on exit, including Ctrl+C. Refs #200 * style(ui): color the question mark in prompts The uncolored "?" before each question read like a stray character. It now uses the accent color of the "›" cursor. Refs #200 * fix(init): name the root git scope by what it versions "everything" suggested plugins, MCP servers and hooks were versioned too, but they live in config.yaml, which the root scope gitignores. The option and summary now say "skills, agents, extras" and note that those settings stay in each machine's config.yaml. Refs #200 * feat(init): show --discover in the new init style --discover still printed the old header, "agent(s)" counts and "+ name" lists next to the new prompt. Global and project discover now share init's answered rows (Tools, Config) and a Next line, and call the targets "AI tools" as init's banner does. Refs #200 * feat(init): replace the pixel logo with a SKILLSHARE wordmark The half-block logo looked stretched on terminals with tall line height and turned to mush when shrunk to fit. init now opens with a three-line pixel wordmark, SKILL in blue and SHARE in gold, that lights up from left to right, followed by the version and tagline on one dim line. The generated logo data and its generator script are gone. Without a terminal, without color, below 256 colors or on a narrow terminal, the banner still prints a plain "skillshare vX" line. Refs #200 * refactor(init): label the chosen tools "Targets" init called them "Tools" while the rest of the CLI, the config file and the `target` command call them targets. The answered rows and the summary now say "Targets", the same label the other commands will use. Sentences that describe what was detected ("Found 3 AI tools") stay as they are. The docs tables, the First Sync steps and both init screenshots are updated to match. Refs #200 * feat(cli): ask yes/no questions with the inline prompt uninstall, trash empty, extras remove, target add, collect, update, upgrade and audit each printed their own "[y/N]:" line and parsed the answer by hand, while init already used the inline Yes/No prompt. They now share it: esc answers no, and a declined question prints one dim "Cancelled. Nothing was …" line, as init's cancel now does too. Without a terminal the prompt reads one line from stdin instead, so piped answers such as `echo y | skillshare uninstall x` keep working. It reads byte by byte so a second question still gets its own answer. Refs #200 * feat(sync): report each target on one aligned row Sync printed a ruled header, a "Backing up" block and a "name: merged (43 linked, 0 local, 0 updated, 0 pruned)" line per target, so the counts that changed were hard to find among zeros. It now follows the init style: one row per target with only the non-zero counts, a single Backup row, and a closing line with the duration. `sync --all` names its Skills, Agents and Extras blocks and no longer explains how to set up extras when none are configured. The non-TTY text changes with it; `--json` stays the stable interface for scripts. Tests match rows through the new AssertRowContains helper. Refs #200 * feat(status): show targets as one table Status printed each target as a header with indented skills and agents lines full of bracketed modes and zero counts, and the audit policy as four lines of uppercase labels. Comparing targets meant reading every block. Each target is now one row with a skills and an agents column, a single line names the modes in use, and audit and version take one line each. Global and project mode share the renderer, so project paths read relative to the project root. Refs #200 * feat(install): report each step on one aligned row Install printed a logo, a box-drawn tree, "Next Steps" bullets and a separate "Audit Findings" block, so the result was hard to find. It now uses the same rows as sync and status: Source, Audit and Install with the destination folded to ~, then a closing line and a Next block. Spinners write through a gate that Stop closes before clearing the line. pterm's render goroutine checks IsActive and then writes, so a fast step such as install --dry-run left "Copying files..." stuck in front of the next line. Refs #200 * feat(uninstall): confirm against one line and point at undo Uninstall opened with a boxed header and Name/Path lines, and closed with the trash folder path and a "Next Steps" bullet. Now one line names the target, its folder and what it holds; the result is a single "Uninstall x → trash, kept 7 days" row; and Next offers sync, the trash restore command that undoes it, and the reinstall command when the skill came from a remote source. A batch run with --force or --dry-run no longer lists the targets twice, since there is no question for the list to support. Mixed batches are counted as items, not targets, which already names the AI tools. Refs #200 * feat(update): report each skill or repo on one Update row Update opened with an "Updating" header, the full source path and a "0 tracked repo(s), 1 skill(s)" line, then printed a Changes box and two success lines before "Next Steps". A single update is now an Update row (source or commit count, time), the commits it pulled in dim text, the Audit row, and Next. A batch ends with the audit result and one closing line that leaves out zero counts. Progress bars now clear themselves when they stop, like spinners, so a finished batch no longer leaves "[3/3] ... 100% Done" behind. Refs #200 * feat(check): list what needs attention and close with one line Check opened with a header, the full source path and an item count, counted skills with updates without naming them, and ended with two "Run ..." hints. It now prints one row per repo, skill or agent that needs attention (behind, update available, stale, failed), a closing line that leaves out zero counts, and the update command under Next. A single-name check is one row, like update. Refs #200 * feat(push,pull): report commit, push and pull as aligned rows Push and pull opened with a header and closed with "Push complete" or "Pull complete", so they never said what they committed, where they pushed, or what a pull brought in. Push now prints a Commit row (file count and message) and a Push row naming the upstream branch, never the remote URL since it can carry credentials. Pull prints a Pull row with the commit and file counts and the commits themselves, as update does for a tracked repository, before the sync output. Dry runs list the changed files as ~ + - instead of raw porcelain codes, and error hints are dim notes instead of info lines. Refs #200 * feat(upgrade): report the CLI and the skill on one row each Upgrade opened with the logo and printed a tree of steps per part (current version, latest version, status) ending in "Already up to date ✓". Each part is now one row, such as "✓ CLI v0.22.0 → v0.23.0 · 3.1s" or "✓ Skill v0.23.0, already up to date", with spinners that clear. Sync is offered under Next only when the skill changed, and the star request is a dim line at the end. Refs #200 * feat(new): report the created skill on one row New printed a "New Skill Created" header, the full path, and numbered "Next steps" that told the user to edit the file and run sync. It now prints "✓ Created ~/…/SKILL.md", the folders a pattern added, and sync under Next. A dry run shows the same row, a Preview section with the template, and the dry-run line. Refs #200 * feat(trash): list items and restores as aligned rows The plain trash list printed each item as an info line with its size and age in parentheses under a "Trash" header, and restore printed two success/info lines plus a "Next Steps" label. The list is now rows of name, size and age with one closing count, and restore is one row naming where the item went back, with sync under Next. An item trashed under a minute ago reads "just now" instead of "just now ago". Refs #200 * feat(collect): list local items and results as aligned rows Collect opened with a header, listed local items as "[target] path" list items under a second header, then printed a third header before the per-item results and a metric summary line. It now lists each local item as a row (name, target, path), asks the inline confirm, prints one row per result and closes with "Collected N skills" plus sync and, when the source is a git repository, commit under Next. Refs #200 * feat(hooks): show hooks and their changes as aligned rows Hooks printed "Hooks source: <path>" as an info line, statuses through the fixed-width Status helper, and results as sentences ending in "Run 'skillshare hooks sync' when ready." Hooks and Agent file changes are now rows, with conflicts marked as failures and inactive outputs as warnings, saves and applies close with one line, and the next command sits under Next. The list's "Pending sync" section no longer shows entries that are already in place. Refs #200 * feat(mcp): show servers, changes and checks as aligned rows MCP printed "MCP source: <path>" as an info line, plan changes through the fixed-width Status helper, results as sentences that named the next command inline, and check summaries as "2 server(s) checked: 1 error(s)". Changes and parked servers are now rows with conflicts marked as failures, saves and applies close with one line and Next, and check marks each server with its findings beneath and closes with "Checked 2 servers: 1 error". The Status helper had no callers left and is removed. Refs #200 * feat(plugin): show packages, plans and results as aligned rows Plugin text output was raw "name · target · id · state" lines with "Warning:", "Includes:" and "Revision:" prefixes, and the list walked a map so packages came out in a different order each run. Packages, discovered candidates, planned changes and results are now rows sorted by name, marked by state (registered, not installed, pending, blocked, failed), with details as dim notes and the dry-run line after a preview. JSON output is unchanged. Refs #200 * feat(audit): replace header and summary boxes with rows Audit framed its context in a header box (mode, path, block rule, policy), numbered batch results "[1/2]", printed per-skill verdicts as "→ Aggregate risk / Block decision" lines, and closed with a Summary box that listed every count including zeros. The context is now one title line with a dim note, flagged skills are aligned rows with their highest severity, the summary leaves out zero counts, and the run closes with one line saying whether anything was blocked and by which severity, followed by the command to see the first blocked skill's findings. The progress bar no longer writes its final frame when stdout is not a terminal; that frame had no newline and ran into the next line. Refs #200 * feat(audit): show audit rules as aligned rows The rules list was a fixed-width table framed by 90-character dividers with a "(N rules: N enabled, N disabled)" footer, and rule changes were sentences like "Set severity for X → HIGH". Rules are now rows keyed by ID with a colored severity and the pattern dimmed, disabled rules dim as a whole, the list closes with a count that names disabled rules only when there are some, and each change is one row. Refs #200 * feat(search): drop the logo and tree, show results as rows Search opened with the ASCII logo, drew its progress as a ├─/└─ tree, listed results under a column header with dividers, and ended installs with "Run 'skillshare sync' to distribute to all targets". Results are now aligned rows with the source, stars or risk, and the description and tags beneath; a single install reports the same Install row as `skillshare install`; batch installs list only failures before one Done line; and sync and audit sit under Next. Login and rate-limit problems name the command that fixes them. Non-terminal output no longer prints a "name: installing..." line per skill. Refs #200 * feat(backup): show backups and restores as rows with one closing line Backup and restore opened with headers, announced dry runs with a warning before doing anything, summarized with an operation box, and followed a backup with a "Recent backups" list. Targets now back up in name order as rows with folded paths, runs close with one Done line (and Next restore), listings are rows keyed by timestamp or path with a total, and dry runs end with the shared dry-run line. Cleanup reports how many backups remain instead of a separate "Current" line. Refs #200 * feat(help): one line per command, subcommands in each command's help The top-level help opened with the ASCII logo and listed about 70 lines across ten uppercase sections plus 15 examples, so it did not fit a screen, yet it left out analyze and the common options. It now lists each command once in six groups with the common options, and points to `<command> --help` for subcommands. The mcp, plugin, hooks and extras pages use the same layout and keep all their content. A mistyped command prints one error with the closest command instead of the whole help, a lone option such as --no-tui shows the help, and `skillshare version` prints one line. Refs #200 * feat(extras): show extras and their changes as rows with Next Extras printed a header, "→ name" lines with ad-hoc colored marks (including ✗ for targets that were only waiting for a sync), and ended each change with a sentence naming the next command. The list now shows each extra as a bold name over aligned target rows (! for drift or not synced) and closes with a count and, when something is pending, Next sync extras. Init, collect, add/remove target, mode and source changes close with one Done line, details become notes, and dry-run collect ends with the shared dry-run line. Refs #200 * feat(target): show targets as sections and rows with Next Target info and the plain list printed "Key:" lines at two indent levels, with "(none)" for every unset filter, and remove printed "Backing up" / "Unlinking" headers with one line per step. Info now shows the name over Skills and Agents sections with aligned rows, the list gives each target one row per resource with details dimmed, and empty filters are left out. Remove reports one row per target (plus its backups) and closes with a Done count; dry runs say what would happen per target and end with the shared dry-run line. Skills on/off, add and mode/naming/filter changes close with Done and Next. Refs #200 * feat(doctor): report checks as aligned rows and end with Next Doctor opened with the ASCII logo, split its report under divider headers, mixed ✓/→/! lines with full paths and "(s)" counts, listed targets in random map order, and ended with a bare warning count that left the fix to scattered "Run:" hints. Checks now print as aligned rows under bold sections (Environment, Targets, Extras, MCP/hooks/ plugins, Storage, Version), paths fold to ~, targets are sorted with one row per resource, and the report closes with a Done line plus up to three Next commands collected from the checks (sync, sync agents, sync hooks, upgrade, ...). The --json output is unchanged. Refs #200 * feat(hub): drop the logo and report hub changes with Done hub index opened with the ASCII logo and a tree of spinner steps, then repeated the result as "→ Mode / Skills / Output" lines with the full path. It now shows one spinner that clears itself and a Done line naming the folded output path, skill count and duration, with the index contents as a note. hub list shows aligned rows with the default and built-in hubs marked in dim text instead of a "*" column, and the add, remove and default commands close with a Done line. Refs #200 * test(install): match the shared dry-run line in online tests The online-tagged install tests still looked for the old "dry-run" banner, which install no longer prints since the restyle. They are skipped by default, so the mismatch only showed under -tags online. Refs #200 * fix(target): align remove rows on target names only The label column was sized for "<name>-agents" so an agents backup could fit, which left a wide gap on every row when no agents were backed up. The agents backup row now uses the target name too and says "agents backed up", so the column fits the names. Refs #200 * fix(update): list each item in a batch dry run A batch dry run only said "Would update N skills". Off a terminal the names leaked out through the progress bar's title lines, but on a terminal those lines clear, so the dry run never said which skills or repos it would touch. It now prints one Update row per item, as the single-item dry run does. Refs #200 * fix(ui): keep the progress bar silent off a terminal Off a terminal the bar printed "Title (0/N)", every title change and every phase header as permanent lines, which a terminal shows only as a frame that clears itself. Audit left a stale "Scanning skills (0/7)" line, and scripts saw different content than a terminal. The bar now prints nothing off a terminal, like the spinner. Refs #200 * fix(audit): avoid a double blank line before Summary The audit header ends with a blank line and Summary added its own, so a clean scan with no result rows showed two blank lines in a row. The Summary title no longer adds one; the result rows add it when present. Refs #200 * fix(mcp): drop the blank line above "Saved the MCP source" A save with no backup or migration notes printed a blank line with nothing above it, so mcp add and mcp edit opened on an empty line. Refs #200 * fix(doctor): stop repeating the extra's name in its findings Extras findings printed "rules rules → /home/me/.claude/rules: 1 file(s) out of sync": the row label already names the extra, the path was not folded to ~, and the count used "file(s)". The rows now start at the arrow, fold the path and pluralize the count. JSON details keep the extra's name so each line still stands alone. Refs #200 * fix(doctor): show integrity issues as rows under Integrity Tampered skills and missing hashes printed as free "! Skill integrity: N skill(s) ..." lines after the verified row, breaking the aligned Environment rows. They now sit under a single Integrity row, which turns to ! when any skill has an issue. Refs #200 * fix(doctor): pluralize the Skillignore and Trash rows The rows read "1 patterns, 1 skills ignored" and "1 item(s) (50 B), oldest <1 day". They now read "1 pattern, 1 skill ignored" and "1 item, 50 B · oldest under a day". The JSON messages keep their wording, since scripts may match on them. Refs #200 * docs: show the restyled output of batch 3 commands The reference pages still showed the old output of upgrade, new, trash, collect, audit, search, backup, restore, extras, hub, target and doctor: divider headers, arrow-prefixed lines and "(s)" plurals. The examples now match what the commands print, in all five locales, and the doctor check table uses the new row labels. Refs #200 * feat(trash): let trash empty skip its confirmation with --force Scripts had no way to empty the trash: off a terminal the confirmation reads stdin and cancels on EOF. --force (-f) skips it, as it does for uninstall and extras remove. Refs #200 * fix(doctor): show source, link and target problems as rows Missing sources, unsupported links, folders without SKILL.md, unknown skill targets, bad include/exclude patterns and broken symlinks printed as free "✗ Source not found: …" lines between the aligned rows. They now use the row of the check they belong to, and broken symlinks or a missing source add a Next suggestion. Refs #200 * fix(ui): leave out durations that would read 0.0s Fast commands ended with "· 0.0s", which says nothing. Every result line now formats its time through ui.Took, which init already used for its steps: durations under 0.05s are left out. Refs #200 * fix(ui): print dev builds without a v prefix Version labels were built as "v" + version everywhere, so a dev build printed "vdev". VersionLabel adds the prefix only when the version starts with a digit, and the logo, help header, version command and upgrade output share it. Refs #200 * fix: pluralize category and drop "just now ago" The checklist status bar appended "s" to its item name and printed "categorys". The trash TUI formatted ages with its own helper that added "ago" after "just now". plural now handles consonant + y, and the trash TUI uses the shared timeAgo, which makes formatAge unused. Refs #200 * fix(target): drop the parenthesized counts in the plain list The plain target list printed "merged (43 shared, 0 local)" while target info and doctor print "merged · 43 shared" with zero counts left out. The sync summary now returns both forms from one scan, so the TUI and --json keep their existing text and the plain list matches the other commands. Refs #200 * test(backup): make the agents backup test back something up The test only synced agents, which become symlinks into the source and are skipped by backup, so it passed without any backup being written. It now adds a target-local agent and checks that the file lands in the backup. Refs #200 * refactor(cli): render every command's --help with printHelp About forty help pages were hand-aligned raw strings with "Usage:", "Options:" and "Examples:" headings, while hooks, mcp, plugin, extras and the top-level help already used printHelp. They now share it, so headings, option order (short flag first) and alignment match across commands. Examples align on their own column so long commands no longer push option descriptions to the right, and "--help, -h" rows are dropped as on the converted pages. Refs #200 * feat(enable): print enable and disable results as rows enable/disable still used the old "Disabled: x (added to .skillignore)" line plus a "Run skillshare sync" sentence. They now print one row per pattern, a Next hint after a change, and the dry-run closing line, like the other restyled commands. Refs #200 * fix(sync): pluralize the leftover cleanup note Project sync printed "Cleaned 1 leftover skill(s)". The note now uses the singular or plural noun, and the sync docs show it as the dim note it is instead of an arrow line. Refs #200 * fix(cli): drop the arrow info lines left in install, update and sync These commands were restyled, but about fifty messages still went through ui.Info, which prints a leading arrow, and several said "skill(s)" or "item(s)". Hints now print as dim notes, empty results ("No agents found") as closing lines, follow-up commands as Next, and counts use the singular or plural noun. Refs #200 * fix(cli): tidy small leftovers found in the recorded output doctor printed "0 minutes ago" for a fresh backup and an ASCII arrow in the Update row, unlike trash and upgrade, which say "just now" and "v1.2.0 → v1.3.0". The "bring the Targets up to date" hint capitalized a word mid-sentence, and search --list showed hub sources under the home directory as a cut-off absolute path instead of folding it to ~. JSON messages keep their wording. Refs #200 * fix(search): fit a home-folded source path in the list Folding the home directory to ~ was not enough: a typical local hub path such as ~/.config/skillshare/skills/frontend/react is 42 characters, so the 40-character cap still cut it. Fifty characters next to the 24-character name column stays within 80 columns. Refs #200 * feat(list): print the plain list with rows and a closing count The --no-tui list still used the old header with a divider and an arrow on every skill, so it looked unlike every other restyled command. Skills now line up in one column under their group, tracked repos use the ✓ / ! marks, and the list closes with a count split by tracked, remote and local (zero counts left out). Project mode keeps its scope as a dim "· project" after the title. Global and project had copied the same plain-output code; both now call printSkillList. The loading spinner clears itself instead of leaving a "Loaded N skills" line. Refs #200 * fix(cli): show help for subcommand --help instead of running it target add/remove/list, trash list/empty and hub list/remove passed --help through as an argument, so they ran the command, failed on a target or hub named "--help", or rejected the flag. tui on --help even switched the TUI on. Each now prints its command's help page. The tui status and toggle lines also move to the row and Done style. Refs #200 * feat(diff): print differences as rows and close with next steps The plain diff still printed a Summary line, divider headers, arrow hints and per-target "scanning" lines when output was not a terminal. Each group of targets now lists one row per kind of change ("New a, b"), targets in sync share a single ✓ row, extras use the same rows, and diff closes with a count and up to three commands. The suggested sync command follows what differs: sync, sync agents, sync extras or sync --all. Agents no longer show as "New 1 skill", because rows name the change rather than counting skills. "skillshare diff all", listed in the help, failed with "target 'all' not found"; it now diffs everything, the same as no argument. Refs #200 * test: sync the install warning summary and gofmt two status tests The "6 findings" wording changed in an earlier commit, but the unit test under cmd/ still expected "6 finding(s)": scripts/test.sh and make check only run ./internal and ./tests, so the cmd tests never ran. Two status tests also had comment alignment gofmt rejects, which fails make check's fmt-check. Refs #200 * test: run the cmd unit tests in scripts/test.sh CI runs go test ./cmd/skillshare/... ./internal/..., but the local runner behind make test and make check only ran ./internal/..., so a stale assertion in cmd/skillshare passed locally and would only fail in CI. Refs #200 * feat(cli): restyle commit and analyze output commit and analyze were the last git and inspection commands still printing the old header and table layouts. They now use the same rows, Done line, and Next hints as push and pull, so a commit reads like the commit row of push, and analyze shows each target group as a bold name with aligned token rows instead of a boxed table. Refs #200 * feat(log): show entries as rows and fold the log path The plain log view still opened each section with a boxed header that printed the absolute log path, then a TIME | CMD | STATUS table. Entries now read like every other command: a status mark, the command, when it ran and how long it took, with details indented beneath. The log path is folded to ~ and moves to a dim footnote. log --stats drops its divider and ends with one summary line. It and the TUI stats panel said "just now ago" for a fresh entry; both now use timeAgo, which already handles that case. Refs #200 * feat(cli): restyle completion, ui and leftover arrow lines completion --install, ui start/stop and a few notices still printed arrow info lines with absolute paths. They now end with a Done line, fold paths to ~, and give config-file lines their own bold heading so the lines to paste read apart from the hints. The empty extras TUI now says the same thing as extras list. Refs #200 * feat(init): report git changes on an existing setup as rows init --remote and init --git-root on an existing setup still printed arrow lines with absolute paths and spinner results in a different voice. They now print aligned Git, Remote, Pull and Git root rows like a fresh init, end a dry run with the shared Dry run line, and give the choices after a remote check as Next commands. A source repo the user created before init had no fallback identity, so on a machine without git config the follow-up commit failed and dumped git's whole "Please tell me who you are" message. The existing repo now gets the same local fallback a new one does. Refs #200 * feat(doctor): warn when a newer built-in skill is published status already compared the skillshare skill with the published one, but doctor only printed the local version, so a run meant to find problems called an old skill healthy. doctor now fetches the published version alongside the CLI update check and suggests upgrade --skill. Both commands share a semver comparison. status compared with !=, so a skill ahead of main (a dev build) was reported as having an update. Refs #200 * fix(cli): count batch audit warnings in words and clear progress spinners The batch install and update audit summary still printed "2 skill(s)" and "warning(s)" after the rest of the output switched to "1 skill" / "2 skills". uninstall and agent update also left "Found N skills" and "Check complete" behind, progress messages the restyle clears. Refs #200 * fix(cli): say so when diff or analyze has no targets With no targets configured, diff reported "No differences" and analyze printed only its "Add -v" hint, both reading like a healthy result. They now say no targets are configured and suggest target add, as target list does. Refs #200 * fix(diff): align values across target sections Each target section sized its labels on its own, so a section with "Local only" started its values two columns later than one with only "New", and the list read ragged. All sections now share one width. Refs #200 * fix(doctor): count built-in skill warnings in the summary The skill rows (not found, missing version, newer version available) were marked as warnings and counted by --json, but never reached the text summary, so doctor could print "! Skill not found" and close with "All checks passed". The all-good integration test only passed because of this; it now installs the built-in skill it needs. Refs #200 * fix(init): stop writing a git identity into existing repos On a repo the user created, init stored skillshare@local in the repo config so its one commit would work. That setting outranks --global, so the advice we printed never took effect and later pushes went out as skillshare@local. The commit now gets the fallback through env vars only. The note for repos init creates names the repo-level command that actually overrides it. Dry runs also wrote .gitignore into existing repos while closing with "nothing was written", and warned about --no-git when it was not passed; both now only describe what would happen. Refs #200 * fix(cli): tell "no targets" apart from "nothing reaches them" diff and analyze said "No targets configured" and suggested adding one whenever there was nothing to show, including when targets exist but have skills turned off or no skill is meant for them. Refs #200 * fix(log): drop the trailing separator on instant entries Entries with no recorded duration ended in a dangling " · ". Also removes the formatRelativeTime alias the stats restyle left unused; its test now covers formatDurationShort directly. Refs #200 * docs: match tui, project list and log examples to the real output The tui and project list examples used label widths the CLI does not print, and the plain log example claimed to show non-TTY output, which joins each entry's details on one line. Refs #200 * perf(version): cache the published skill version for a day doctor and status asked GitHub for the latest skill version on every run, adding up to 3 s when offline. They now reuse the answer for 24 hours, the same interval the CLI update check caches for. upgrade --skill still fetches fresh and records what it got. Refs #200 * perf(server): reuse the cached skill version on the dashboard The version endpoint fetched the published skill version on every call, like doctor and status did, so it now shares their 24-hour cache. It also treated any difference as an update, offering a "newer" skill to anyone running a local build ahead of main. Refs #200 * test(redteam): match the restyled update --diff heading update --diff now titles its file list "Files changed" in sentence case, like every other section, so the check for the list looked for the old "Files Changed" box title and failed although the list was there. Refs #200 * test(cli): keep /tmp fixtures unfolded where HOME is /tmp scripts/test.sh now runs the cmd unit tests, so the docker sandbox runs them too, with HOME=/tmp. shortenPath then folds the /tmp fixtures in four tests to ~ and their exact-path checks fail. The tests now point the cached home elsewhere while they run. Refs #200 * fix(init): find skills/ in a repo that holds nothing else The check for a skills/ folder ran only when the repo root had no skill folders, but it counted skills/ itself as one, so it never ran. A repo with only skills/ became the source as a whole, one level too high. Refs #200 * fix(init): keep the skills git scope for a custom source With a remote that has no skills yet, init defaulted to versioning the whole skillshare folder. For a --source outside that folder it holds none of the user's skills, so the commit and every later push carried nothing while init reported the remote as linked. Refs #200 * test(sync): check only the Agents section for updated agents The restyle turned the old "0 updated" check on the agent summary into "no 'updated' anywhere", which also covered the Skills section. On macOS the first project sync reports the skill as updated there, so the test failed on something it was never meant to check. Refs #200 |
||
|
|
54d0d5eed0 |
docs(wiki): require all five shell completions for command changes
The completion scripts are written by hand and never read the CLI's dispatch, so new subcommands (mcp edit in bash and fish, backup list and show in fish) went missing in some shells without any test failing. Contributors now have an explicit rule and a completion-criteria check for it. |
||
|
|
92b78c2962 |
docs(wiki): route agents to the shared sync runners and request helpers
The recent refactors consolidated sync loops into internal/sync runners, server body decoding into decodeJSON, and UI kind queries into kindQuery. Without pointers in the topics an agent would likely reimplement these inline and reintroduce the drift the refactors removed. |
||
|
|
bf1226ea5c |
docs(skills): fix agent instructions that drifted from the code
Agents follow these skills literally, and several no longer matched the repo: the test example called AssertSuccess() without t so every test written from it failed to compile, update-docs grepped for a flag package the CLI never uses, codebase-audit checked a targets.yaml schema and a specs/ directory that are gone, and the auth-test recipe pointed at the wrong package and ran credential-helper outside the login shell that puts it on PATH. Also reconciles rules that contradicted AGENTS.md (host-side test runs, unconditional scope confirmation, commit/tag authorization) and drops a reference to an mdproof skill that is not installed. |
||
|
|
262e639701 |
docs: add task-routed agent wiki
Add a shared instruction kernel and byte-budgeted topic router so agents load only task-relevant repository guidance. Wire drift checks into local and CI workflows and point project skills at the routed topics. |