mirror of
https://github.com/runkids/skillshare.git
synced 2026-11-20 12:23:22 +00:00
113d410da7afffa3e82e31ca509331ebdfb2bf30
13
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
0a6cd6d0f8 |
chore(devcontainer): install recording tools on first screenshot run
Every container start installed vhs, ttyd, ffmpeg and chromium before the dev servers came up, which takes minutes on a fresh container while screenshots are only taken now and then. record-tui.sh now runs the install itself, so the cost moves to the first screenshot run and later runs skip it. Refs #200 |
||
|
|
355b42ee57 |
feat(cli): one frame and keymap for every TUI, inline prompts, file viewer (#370)
* chore(devcontainer): add a TUI screenshot kit Recreating the devcontainer wipes vhs and the browser it drives, so every TUI review started with a manual reinstall. The start script now installs the recording tools when they are missing and skips straight through when they are present. record-tui.sh screenshots each full-screen TUI in its own fresh ssenv, filled by tui-fixture.sh through real commands, so the TUI redesign can compare before and after on the same data. Refs #200 * feat(cli): ask small choices inline instead of full screen The restore source, new-skill wizard, install skill picker and the other checklist prompts each took over the whole screen for a handful of options, and the answer vanished once chosen. They now use the same inline prompt as init: the question appears in place, collapses into a "✓ label value" line, and stays in the scrollback. Lists longer than the visible rows can be narrowed with /, and esc inside the filter only leaves the filter. Every inline prompt shows one key line in the wording the full-screen TUIs will share. The new wizard drops its esc-goes-back steps: esc cancels, as in init. Refs #200 * feat(cli): give the list TUI the shared frame and keymap The full-screen TUIs each had their own header, footer and key letters, so the same action used different keys per screen and the help line listed everything at once. list is the first screen on a shared frame: one title line with scope, counts and tabs, the list and details side by side without dividers, and one key line with the common keys and the position. Everything else moves under ?, and confirmations ask on the key line so the list stays visible. Keys follow one lowercase letter per action (u update, d uninstall, t enable/disable, m manual only, ! audit). The All tab and the s status cycle are gone: tab switches skills and agents, and status: in the filter or --status covers enabled/disabled. Rows drop the group prefix that the heading above them already shows. Refs #200 * docs: drop key-by-key TUI instructions from command pages The command pages carried key tables, screen mock-ups and one bullet per key for every full-screen TUI, in five languages. The TUIs now show their keys on screen, so these pages repeated what the screen says and went stale with every key change (several already listed keys that no longer exist). Each TUI section is now one paragraph on what the screen shows and what it can do. What the screen does not explain stays: the filter tag syntax, what manual only does to SKILL.md, the analyze color thresholds, when audit opens its TUI, and that target changes are saved to config immediately. Refs #200 * feat(cli): move the trash TUI onto the shared frame The trash TUI replaced the whole screen with a confirmation and a spinner, so you lost sight of what you had selected, and r/d did nothing until something was ticked. It now uses the shared frame: checkbox rows with size and age, details beside them, and the confirmation, the names it covers, the running operation and its result on the bottom lines. With nothing selected, r and d act on the row under the cursor. Refs #200 * feat(cli): move the log TUI onto the shared frame Log rows were two-line "[date] COMMAND — status" blocks, stats lived behind s as a separate screen, and delete swapped the help bar for a prompt you could miss. Rows are now one line with time, command and a status mark; Entries and Stats are tabs on the title line next to the count and success rate; and the delete confirmation takes over the key line. With nothing selected, d deletes the entry under the cursor. Row delegates no longer force a 40-column minimum, which wrapped every row in lists narrower than that. Refs #200 * feat(cli): move the audit TUI onto the shared frame The audit TUI had its own tab bar, a divider column and a two-line summary footer, and esc quit even with a filter typed. It now uses the shared frame: scan counts and the Skills / Agents tabs on the title line, the worst severity at the right of each row, the scan-wide severity, threat and policy summary on the note line, and esc clears the filter before quitting. Rows under a group no longer repeat the group's name. Colored title facts keep their color instead of being dimmed. Refs #200 * feat(cli): move the audit rules TUI onto the shared frame The rules browser used keys no other screen shared: s for severity, space to toggle and R pressed twice to reset. It now follows the shared keymap: t turns a rule or pattern on or off, e asks for the new severity on the key line, and R asks yes/no before deleting audit-rules.yaml. The severity tabs sit on the title line, rows show the rule count or "off" at the right, and rule rows drop the pattern prefix the group row already shows. Space still toggles. When the title line is too narrow for every tab, it shows only the active one instead of clipping them. Refs #200 * feat(cli): move the analyze TUI onto the shared frame Analyze put the target switcher, a stats line and the help text in a three-line footer and sorted with s, which means sync everywhere else. It now uses the shared frame: skill count and always-loaded and on-demand tokens on the title line, one tab per target group, o to sort with the current order on the key line, and esc clears the filter before quitting. The details follow the list layout, and lint warnings use the ! mark the CLI uses. renderDetailSection and renderFactRow had no other callers and are removed. Refs #200 * feat(cli): move the diff TUI onto the shared frame The diff browser drew ruled separators, "── Next Steps ──" banners and an arrow before every suggested command, and esc quit with a filter typed. It now uses the shared frame: target, extra and difference counts on the title line, what differs at the right of each row, group rows like the list's, plain headings in the details, and esc clears the filter before quitting. Refs #200 * feat(cli): move the restore TUI onto the shared frame Restore replaced the whole screen for the confirmation, the running operation and the result, rendered two-line rows, and esc quit even with a filter typed. It now uses the shared frame: the target or the chosen target and its backup count on the title line, one-line rows with backup count and age or skill count and size at the right, and the confirmation, what it covers, the spinner and the result on the bottom lines. Esc clears the filter, then goes back, then quits. Refs #200 * feat(cli): move the MCP manager onto the shared frame and keymap The MCP manager used its own letters (a add, x remove, b backups, r refresh), hid the details behind Enter, and printed two help bars. It now uses the shared frame and the keys every other TUI uses: n add, i import, e edit, d remove, s sync, r restore, with the details of the selected server beside the list and ? for all keys. Refresh is gone because the manager reloads after every action. Command docs drop the key table, and the how-to page and built-in skill name the new keys. Refs #200 * feat(cli): move the search selector onto the shared frame The search selector rendered two-line checkbox rows, put the details under the list, used s for "search again" although s means sync everywhere else, and Enter with nothing selected silently cancelled. It now uses the shared frame with the keyword and counts on the title line, one-line rows with stars or risk at the right, and the details beside the list. Esc clears the filter, then goes back to the keyword prompt; Enter with nothing selected installs the row under the cursor, as r and d do in other TUIs. The command page drops its screen mock-up and key list, and no longer claims the search restarts after an install. Refs #200 * feat(cli): move the target TUI onto the shared frame and keymap The target TUI had five uppercase keys (M, N, I, E, R), a separate skills-or-agents picker before three of them, and full-screen pickers and remove confirmation. e now opens one menu of every setting the target has (skills mode, naming, include, exclude; agents mode, include, exclude, with agent filters marked as ignored in symlink mode), and the pickers and pattern editor open beside the list. d asks on the key line with the command it will run and what removal does. Patterns are added with n, as everywhere else. Also drops the filter style helper the MCP change left unused. Refs #200 * feat(cli): move the extras TUI onto the shared frame and keymap The extras TUI used six uppercase keys (N, X, S, C, M, F), each with its own full-screen menu, and a full-screen confirmation. It now uses the shared frame and keys: n new, d remove, s sync, c collect, and e for one menu with the mode and flatten setting of every target. The target menu and mode picker open beside the list, and confirmations ask on the key line with what the action does. The picker row helper moves to the shared frame, and the split and scroll-hint helpers no TUI uses any more are removed. Refs #200 * feat(cli): share one framed file viewer between list and extras The list and extras file viewers were two copies of the same layout with the old look: an indented title, a │ column between the tree and the file, and a hard-coded yellow cursor. Both now draw through one renderer in the shared frame: the skill or extra and the open file on the title line, the tree beside the file without a divider, and the scroll position at the end of the key line. Refs #200 * feat(cli): ask for a large repo's folder inline Installing from a repo with 50+ skills opened a full-screen folder browser with its own filter bar and key line, then dropped back to an inline skill checklist. The folder question is now an inline select like every other install prompt: the first choice installs everything below the current folder, esc goes up one level, and the chosen folder collapses into a "✓ folder" line before the skill list appears. The screenshot fixture gains a 60-skill repo so the picker can be recorded, and the filter-bar and page-info helpers that only the old picker used are removed. Refs #200 * feat(cli): ask for MCP and plugin values inline MCP and plugin values were typed into a separate textarea program that submitted on ctrl+d, a key no other prompt uses. They now go through a new ui.Text prompt drawn like the other inline questions: enter submits, alt+enter starts a new line, and the box grows with the value. The MCP name is a single line, so it uses ui.Input. Answers are not echoed afterwards because a value can hold a secret. Refs #200 * feat(cli): drop the full-screen MCP change preview Every MCP add, edit, remove, restore and sync already prints its plan inline and then asks whether to apply it. The full-screen preview in between showed the same changes again and needed one more enter, so it is removed along with the review step of the prompts interface. The confirm question loses its "Review complete" prefix, and a blank line now separates it from the plan. Refs #200 * feat(cli): ask extras init questions inline `extras init` without arguments ran its own full-screen wizard with a hand-drawn cursor and a different key line on every step. It now asks the same questions inline, like `init`: each answer collapses into a "✓" line, the target line shows where the file lands, and esc cancels with "Nothing was created". A new ui.InputValid keeps a question open and shows the error under it until the answer passes, which the name, file name and per-target file name questions need. Refs #200 * fix(cli): drop stale key hints from MCP prompts and help `mcp --help` still listed the manager keys from before its redesign (a add, x remove, b backups, r refresh), and several MCP and plugin questions repeated "Esc cancels" or claimed `a` selects all, while the key line under every prompt already shows the real keys (ctrl+a for all). The help now just says where the keys are, and the questions keep only what the key line cannot say. The MCP command page drops the same key list in all five locales. Refs #200 * feat(cli): open a skill's files at its audit findings The audit TUI listed each finding's file, line and one-line snippet, but judging whether a finding is real needs the lines around it, and that meant leaving the TUI to open the file by hand. Enter now opens the selected skill's files at its most severe finding, with the raw text numbered and the flagged line marked; n/N steps through the findings in the order the details number them, and the line above the keys says which finding is shown. The viewer state lives in a new fileBrowser so analyze and trash can open skills the same way. Long lines wrap under their text instead of being cut, since the evidence is often at the end of a line. Refs #200 * feat(cli): open a skill's files from analyze Analyze flags lint issues such as a description that is too short, but the screen only showed the description text, so fixing a skill meant finding its folder first. Enter now opens the selected skill's files, including local ones that live only in a target, as raw numbered text with the front matter, and the line above the keys repeats the first lint issue so it can be checked against what is written. Refs #200 * feat(cli): open a trashed item's files before restoring The trash TUI showed only the first fifteen lines of SKILL.md, which is not enough to tell two trashed versions apart or to see a skill's other files. Enter now opens the item's files in the same viewer as list and analyze, rendered as Markdown, and esc returns to the trash. Refs #200 * fix(cli): leave front matter out of the agent viewer in list Opening an agent in the list TUI rendered its whole file as Markdown, so the front matter came out as a horizontal rule and a "## name: ..." heading. Skills already drop it because the details panel shows the name and description; agents now read their body the same way. Refs #200 * test(cli): compare trash restore destinations home-relative The trash TUI shows restore destinations through shortenPath, so with HOME=/tmp, as in the offline Docker sandbox job, /tmp/skills prints as ~/skills and the tests that expected the absolute path failed. They now expect whatever shortenPath gives for the same path. Refs #200 * fix(cli): show control characters in viewed files as symbols The file viewers in list, extras, audit, analyze and trash wrote a file's bytes to the terminal as they were. Audit and analyze exist to inspect skills that may not be trusted, and a SKILL.md with an ESC or OSC sequence could rewrite the screen or the window title instead of being shown. Control characters are now replaced with same-width symbols such as ␛ before rendering, which keeps line numbers and the marked finding line in place; newlines and tabs are kept and CRLF is read as LF. Refs #200 * fix(cli): open audit findings in files the tree leaves out The file tree skips dotfiles and stops at three levels and 200 entries, but the audit scan reads root dotfiles and goes deeper. A finding in such a file, like a root .env, left the viewer on the previous file with the new finding's note above unrelated text. Opening a finding now adds its file to the top of the tree under its full relative path when it is missing, so the marked line is always the one reported. Refs #200 * fix(devcontainer): exit nonzero when a TUI screenshot fails to record record-tui.sh printed FAIL for a screen whose vhs run failed but still exited 0, so an unattended run looked like every screenshot was taken. It now remembers a failure, keeps cleaning up and recording the other screens, and exits 1 at the end. Refs #200 * fix(cli): keep other files' front matter and fit text to the pane Two problems in the shared file viewer: - It dropped YAML front matter from every Markdown file, so a trashed skill's README or template lost its metadata, which nothing else in the trash view shows. Only SKILL.md and a single-file agent drop it now, since their name and description appear in the details. - The open file was wrapped to at least 40 columns. In a narrow terminal that is wider than the right pane, so the layout wrapped each row a second time, breaking lines apart and moving the marked finding line. Text now wraps to the pane's real width. Refs #200 * fix(cli): keep frame lines within the terminal width joinEnds padded the title, confirm and filter lines but never cut them, so a long search query, path or command made the line wrap. Every TUI sizes its body for a fixed four lines of frame, so the wrap pushed the bottom of the body off the screen. Long text is now cut from the left side, keeping the status or tabs on the right. Lines are left alone until the terminal has reported its width. Refs #200 * fix(cli): show a nested skill's folder when no group heading names it List rows dropped the first path segment for every skill on the grounds that the group heading above shows it. With a single group, or a filter that leaves one, there is no heading, so frontend/react showed as just react and same-named skills from two folders looked alike. Rows now drop it only under a heading; a tracked skill's repo dir is still dropped as before. Refs #200 * fix(ui): let esc leave a prompt's filter after enter found nothing The inline prompt guessed the filter state from key presses and treated enter as leaving the filter. huh's Select stays in the filter when enter has no match, so the next esc, meant to leave the filter, cancelled the question instead: one folder level back in the large-repo picker, or the whole install at the top. The prompt now asks the field whether it is filtering. Refs #200 * fix(cli): show control characters in the trash preview as symbols The trash details panel prints the first lines of a trashed SKILL.md, and it wrote them to the terminal as they were. The file viewers already pass text through printableText so an ESC or OSC sequence in a skill is shown instead of acted on; the preview now does the same. Refs #200 * fix(cli): scroll an agent's text with the wheel anywhere in list An open agent has no file tree, but the wheel still treated the left quarter of the screen as the tree, so scrolling there did nothing. The whole screen now scrolls the agent's text. Refs #200 * fix(ui): read prompt answers after the prompt has run The prompt helpers returned "value, runPrompt(..., &value)". The Go spec leaves the order between reading value and the call unspecified, so a compiler may return the value from before the user answered. gc 1.25 runs the call first, so answers arrive today, but nothing guarantees it. Each helper now runs the prompt into err and then returns the value. Refs #200 * fix(cli): name hidden Unicode and skip oversized files in the viewer Two gaps in the file viewer used to inspect untrusted skills: - Zero-width and bidirectional characters passed through unchanged, although the audit reports them as HIGH (Trojan Source). Opening such a finding reordered or hid the text instead of showing the cause. They now appear as <U+202E> and the like. - Moving onto a file read all of it, then copied it again while numbering and wrapping, with no size limit. The audit skips files over 1 MB; the viewer now does too and says the file is too large. Refs #200 * fix(cli): show control characters in viewed file names as symbols File contents in the viewer already pass through printableText, but the tree and the title printed file and skill names as they were. A file named with an ESC sequence, a newline or a bidirectional character in a skill under review could still reach the terminal, or break the frame across lines. Names now go through printableName, which also shows a newline or tab as a symbol so the name stays on one line. Refs #200 |
||
|
|
7f8a2dd083 |
chore(devcontainer): install the claude, codex and pi CLIs
Plugin installs could only be checked against real Agents on the host. The CLIs are installed on the dev-home volume so image rebuilds keep them, and relinked into /usr/local/bin on every start so non-login docker exec finds them. A failed install warns without blocking start. |
||
|
|
4bcd569e25 |
feat: MCP connections, plugins and a redesigned dashboard (v0.21.0) (#285)
* feat(mcp): sync portable server configuration across six clients
Add inline and external MCP sources with guided CLI and dashboard setup, native imports, conflict previews, ownership tracking, backups, and restore. Support Claude Code, Codex, Cursor, VS Code, OpenCode, and Grok CLI in global and project scopes.
Format YAML on save, document MCP fields in the config assistant, and keep its layout stable for scalar list items. Include schemas, localized UI copy, documentation, and regression and end-to-end coverage.
* fix(config): keep loading config when the MCP section is invalid
A mistake in the mcp section (an unknown key, a targets value that is
not a list, an invalid server field) made config.Load, LoadProject,
Save, SaveIn and ValidateConfig fail. Every command that reads config,
including skills sync, install, list and the dashboard, stopped working
because of settings it never uses.
MCPConfig now keeps a section that does not parse exactly as written and
records the error instead of returning it, so commands unrelated to MCP
load and save the config without touching that section. MCP commands
still validate their source on every run, and the dashboard config
editor calls the new ValidateMCP, so saving an invalid MCP section there
is still rejected.
Also correct the ProjectSources comment: sources.mcp resolves from the
directory containing config.yaml, not from the project root.
* fix(mcp): protect Agent files during concurrent edits and recovery
A release review of the MCP sync engine found ways it could lock users
out, report false conflicts, or change entries it does not own.
Recovery
- A failed write left pending.json behind, and every later MCP command
refused to run. Failed writes now remove their journal, and a journal
whose Agent file changed again is discarded, because ownership hashes
still flag entries that no longer match.
- Preview no longer writes. It reads the ownership that recovery will
record, byte for byte, so a preview stays valid across the recovery
that the next write performs under the lock.
Concurrent Agent writes
- Claude Code rewrites ~/.claude.json on its own, so hashing whole files
expired previews and failed applies. Revisions and pre-write checks
now cover only the MCP entries, and apply rereads each file and applies
the previewed entry edits to its current content, keeping settings the
Agent wrote after the preview.
Comparison and ownership
- Only fields Skillshare renders are hashed, after dropping defaults
Agents add or omit (type stdio/http, empty env, args or headers,
enabled: true) and header name case, so equivalent entries are not
reported as drift. enabled and disabled are compared, so turning off a
managed server is a conflict instead of being overwritten.
- An unmanaged entry that already matches the source is reported as
unchanged but no longer claimed, so removing the server never deletes
an entry the user wrote. Import adopts it explicitly, and without
--replace refuses to rewrite a differing entry, such as a literal token
that import turned into an environment reference.
- Sync keeps Agent-only fields such as timeouts in existing entries.
Import
- Agent-only fields become warnings instead of blocking the import.
- streamable-http is accepted, and enabled/disabled flags are checked
for every client.
- Values carrying a URL password, such as database DSNs, become
environment references, and credential-like arguments are flagged.
Writes and state
- Save only renders the definition first, so a server that could never
sync, such as one without targets, is rejected before it is saved.
- A symlinked config.yaml is written through to its target.
- TOML entries are updated in place, keep CRLF line endings, and repeated
add/remove cycles no longer grow blank lines.
- JSON edits no longer HTML-escape characters such as &.
- GROK_HOME is honored.
- Backups keep the newest 20 per Agent file, pruned by file name, and
damaged backup files are skipped instead of failing the list.
- GET /api/mcp no longer fails when an Agent that no server uses has an
unresolvable path.
* feat(mcp): detect the client format of pasted JSON
Import without --from, the add wizard and the dashboard import API
assumed Claude's mcpServers shape unless a client was named, so VS Code
"servers" and OpenCode "mcp" snippets copied from server docs failed to
import. The client is now chosen by the top-level key, and a bare server
object still reads as Claude's single-entry shape.
TOML stays explicit because Codex and Grok share the format; a .toml
file without --from is still read as Codex.
* refactor(mcp): print CLI results through internal/ui
MCP commands wrote plain fmt output and duplicated statusFromErr, unlike
every other command. Plans, backup IDs and save/apply messages now use
the shared ui helpers, so they get the standard status prefixes and
colors; each change line shows the server name, action and target. The
operation log uses statusFromErr. --json output is unchanged.
* fix(server): serve MCP settings only to localhost or IP hosts
MCP settings include stdio commands that Agents execute, so a web page
must not be able to read or change them. The existing Origin check does
not stop DNS rebinding: once an attacker's domain resolves to 127.0.0.1,
the browser sends that domain as both Origin and Host from a loopback
address, and the dashboard also binds 0.0.0.0 in Docker.
Rebinding always needs a domain name, so every MCP route now also
requires a Host that is localhost or an IP literal, whatever the bind
address. Other dashboard routes are unaffected. Opening the dashboard
through a domain name, including a reverse proxy, therefore returns 403
for MCP settings; the message says to use localhost or an IP address,
because rewriting Host at the proxy would still fail the Origin check
and would reopen the hole.
Remove the unused POST /api/mcp/sync endpoint. Configuring with sync
covers it, and the guard wraps every remaining MCP route.
* fix(sync): make sync --all report MCP results reliably
- "sync -g mcp" and "sync --dry-run mcp" ran skills sync, because mcp
was only recognized as the first argument. It now matches in any
position.
- sync --all --json printed plain-text errors when the MCP preflight
failed, and only an error on conflicts. Preflight errors now use the
JSON error shape, and conflicts also return the credential-free plan so
scripts can see which entries conflict.
- When resource sync failed, MCP was skipped without notice. Text output
now warns that MCP settings were not applied; JSON output omits the mcp
field, which --all otherwise always includes.
- MCP was applied with the preflight revision, which failed whenever the
resource sync changed config or state in between. It is now planned
again under the MCP lock, and conflicts found then still stop the
write.
* fix(sync): recognize agents and extras after flags
sync only checked the first argument for a resource kind, so
"sync --dry-run agents" and "sync -g extras" silently synchronized
skills instead. Sync flags take no values, so the kind now matches in
any position.
The shared parseKindArg keeps its first-argument rule: uninstall, update
and similar commands accept resource names, and a name such as "agents"
must not be read as a kind.
* feat(ui): redesign the MCP dashboard around a server-by-agent matrix
The MCP page listed servers and planned changes as flat text, which made
it hard to see where each server is written and what needs attention.
- A matrix shows each server's status per Agent, summarizes pending
changes and conflicts, and can hide synced entries. Agents whose MCP
file or config directory exists are marked as detected; GET /api/mcp
now returns the detected clients.
- Setup is a two-step dialog: add a remote URL, paste JSON or TOML, or
import from an Agent, then preview which Agent files change. Importing
an entry the Agent already has adopts it, Replace overrides only that
entry, and a target selection equal to the inherited mcp.targets is
saved without pinning targets on the server.
- Conflicts explain their cause and offer Import from <agent> or
Replace. Removal lists the affected Agent files and offers removing
from the source only or removing and syncing. Backups are grouped by
day, with a preview before restoring a file.
- Agent icons appear on the MCP and Targets pages, and the universal
target is marked as a path shared across agents. Brand icons come from
@lobehub/icons-static-svg, with bundled SVGs for Warp and Zed.
- Segmented controls wrap instead of overflowing narrow containers.
- New copy is translated for every supported locale.
* fix(ui): let Sync all apply MCP after syncing resources
Sync all previewed MCP, synced skills, agents and extras, then applied
MCP with the revision from the first preview. When the resource sync
changed config or state, that revision was stale and MCP failed with
"preview again" after everything else had already been synced.
MCP is now rechecked before and after the resource sync by comparing the
reviewed changes (target, name and action) instead of the revision, and
applied with the fresh revision. A different set of changes still stops
before any MCP file is written.
* fix(ui): keep flow-style YAML collections when saving config
Formatting on save forced every collection into block style, so a
hand-written "targets: [claude, codex]" was expanded into a list each
time the config was saved. Each collection now keeps its flow or block
style, indentation is still normalized and comments are preserved, and
flow collections are not padded with spaces.
* docs(mcp): document ownership, normalization and dashboard host rules
- Explain that matching entries stay unmanaged until imported, so
removing a server leaves them in place, and that import adopts an
identical entry while --replace rewrites a differing one.
- Note that Agent defaults and header case are not treated as changes,
that disabling a managed server is a conflict, and that previews stay
valid while an Agent rewrites unrelated settings.
- Describe Agent-specific fields, streamable-http, GROK_HOME, backup
retention, recovery by the next MCP write, and the VS Code limitation
on environment references in headers.
- Document that MCP settings require opening the dashboard by localhost
or an IP address, with SSH port forwarding for remote machines.
- Update the built-in skill for all six clients and the adoption rule,
and the MCP runbook for import refusal, Agent-specific fields and
pulled changes.
* docs(skill): streamline guidance and refresh resource workflows
Keep the built-in skill entrypoint focused and route agent and MCP details to dedicated references. Correct scope, audit, automation, and recovery guidance against the current CLI.
* feat(ui): redesign the dashboard around two styles and a flatter layout
The dashboard had grown page by page, so the same idea looked different
depending on where you met it and pages held controls with nothing to act on.
This rebuilds it on one token set that drives both the Clean and Playful styles
in light and dark, and reshapes the pages around what a person actually does.
Notable changes:
- MCP: replace the server-by-agent matrix with one row per server. The agents a
server writes to are chips inside the row, so the list grows downwards as more
CLIs gain MCP support instead of scrolling sideways.
- Settings: collect General, Backup, Log, Health, Extensions and Files into one
page. The Files tab keeps a panel beside the editor showing what the field
under the cursor does, the file's shape, or the unsaved changes.
- Audit rules: the YAML editor gets the same panel, plus a Test tab that runs a
rule's regex against pasted lines.
- Skills and Agents become separate pages; install, search, updates and trash
move into them. Old routes redirect.
- Tour: rewrite every step's copy, add MCP and Install steps, and anchor each
step to a control that is always rendered so no step silently times out.
- Give every button a pointer cursor; the browser default does not say a button
is clickable and each component class had to opt in by hand.
Docs follow the new Settings tabs and the MCP list.
* chore(devcontainer): move dev servers to uncommon ports
5173, 19420 and 8888 are defaults that other projects on the same
machine already hold, so `make devc` failed to bind and the container
never started. Use 45173, 49420 and 48888 instead, identical inside and
outside the container so every banner, log and doc prints the URL that
actually works.
* feat(ui): link dashboard source counts to their pages
The counts in the playful dashboard's source note named a number but led
nowhere, so reaching Skills or MCP from there meant going back to the
sidebar. Each row is now a link to its own page.
The hover fill uses currentColor because .ss-pinnote.src overrides the ink
tokens for the yellow note.
* feat(ui): build and browse hubs from the dashboard
A hub is a JSON index that lists skills, and until now the web UI could
only consume one someone else had already hosted. Writing the index by
hand was the only way to produce one, and the two halves never met: the
dialog that searched hubs and the page that would have built one shared a
config file but nothing else.
The new /hubs page holds both halves behind two tabs:
Browse pick a hub, filter its contents by tag or text, install from it
without leaving the page
My hubs assemble an index from installed skills, validate it, export it
A draft is offered as a source in Browse straight away, read from the
draft API rather than a file, so you can see what a recipient sees before
deciding whether to host anything. Where the index is hosted is stored on
the draft and stripped from the exported document, so a reopened hub
remembers where it was published and the published file stays clean.
Hub management moves out of the install dialog, which keeps only the
search-source dropdown and links here.
Routing switches to createBrowserRouter for useBlocker, which guards the
builder against navigating away from unsaved entries.
* docs(extras): add shared instructions recipe for AGENTS.md across agents
Answers a recurring question about sharing one instruction file between AI
agents: extras already covers it, since each agent keeps its user-level
copy in its own directory and one extra can target all of them.
Naming the source file AGENTS.md rather than something neutral matters —
Codex concatenates AGENTS.md files and has no import syntax, so it only
recognises the file by name. Claude Code and Antigravity read a fixed
filename of their own but resolve @-imports, so a one-line CLAUDE.md or
GEMINI.md picks up the synced file.
Says plainly that this is not agent memory. Agents keep their own
learnings in private stores — a Markdown directory for Claude Code, a
database for Codex, non-file storage for Cursor — so that side is a
migration problem, not something syncing files can solve.
* feat(ui): filter skills and agents by target
The Targets column showed which targets a resource reaches, but there was
no way to narrow the list down to one. The filter reads the sync matrix —
the same source that column renders — so a result always matches the icons
the rows show.
Options and counts are derived from the matrix, so no target is offered
that would filter to nothing, and the control stays hidden until at least
two targets have something. A selected target that disappears on a kind
switch or an uninstall falls back to All rather than emptying the list.
The toolbar had 24px to spare at 1440px, so the new control wrapped the
row. Source moves from a 325px segmented control to a dropdown like its
neighbours, and every filter now sizes to its label instead of a fixed
width that truncated the longer values.
* fix(ui): tighten page headers and reach hubs from skills
PageHeader carried mb-7 while .ss-wrap already separates its children with a
28px flex gap. Margins and flex gaps add up rather than collapse, so every
page inside the wrapper opened with a 56px hole under its title. Move the
default onto .ss-pgh so the wrapper can zero it, keeping the 28px for pages
that lay out their own children.
Hubs is a source you install from and a catalog you publish, not inventory
you own, so it no longer sits in the Library group next to Skills, Agents and
Plugins. The Skills page header already links to it and the page already
carries a back link there. Skills stays highlighted while the hub page is
open. Plugins takes the Package icon its own page identifies with, so the
sidebar no longer shows two identical puzzle pieces.
* fix(skill): stop implement-feature from running --no-tui as a command
The dispatch-order note wrote "not --no-tui" as !`--no-tui`. In a skill file
that is the syntax for running a shell command at load time, so the skill died
with "command not found: --no-tui" before any of it could be read. Spell the
condition out in words instead.
* feat(list): toggle model invocation for a skill with M
The only cheap gesture in the list TUI was E, which hides a skill from every
harness. Wanting a skill installed but not auto-loaded meant leaving the TUI
to edit SKILL.md, so people disabled skills they only meant to make
manual-only. M flips disable-model-invocation in place and the detail panel
shows a "manual only" badge so the state is never a blind toggle.
Unlike E this edits the skill file, which upstream may own: update skips
tracked repos with local changes, and reinstalling a skill drops the edit. M
says so and asks before writing in those cases. The flag is written as a
single-line edit rather than a YAML round-trip, and turning it back off
removes the line, so two presses return the file byte for byte and a tracked
repo is clean again. Agents are left alone; their harnesses do not read the key.
Refs #283
* feat(plugin): manage complete plugins across agent tools
Add CLI, TUI, and web flows for discovery, adoption, sync selection, updates, and removal while preserving native package formats and unrelated installations.
Support Claude, Codex, Cursor, Antigravity desktop, Pi, and OpenCode. Update help, completions, built-in skill, and documentation; keep plugins outside sync --all.
* docs(skill): describe the redesigned dashboard in the style skill
The style skill still documented the pre-redesign hand-drawn system, so
pages written with it came out on legacy tokens and outside the ss-*
classes; the new Plugins page was the first casualty.
The rewrite names tokens and classes and points to components.css for
their values, because copied values are what went stale last time. The
ui command docs described Playful by the old look as well.
* fix(ui): keep Playful ghost buttons free of stray shadows
The hover and disabled rules outranked the ghost variant's
box-shadow: none, so a frameless button grew a lone shadow arc in
Playful. Bulk toolbar and toast buttons shared the problem.
Ghost also gets a soft outline in Playful: beside 2px ink frames a bare
label such as Cancel did not read as a button.
* refactor(ui): lay out the Plugins page like the MCP page
The page was built on legacy tokens and plain markup, so it missed the
Playful frames and drifted from every other page. A per-agent column
layout would not have scaled either: each agent that gains plugin
support would add a column.
Plugins now follow the MCP server list: one row per plugin with its
agents as toggles inside the row, so the list only grows downwards.
Per-agent sync and update move to package-level actions in the row
menu, and the dialogs use the standard header, body and footer.
* feat(ui): give plugins a kind colour and per-agent actions
Plugins borrowed a neutral grey tile because no kind colour existed,
which made them the one resource without an identity on the page.
Magenta sits furthest from the five hues already taken.
Laying plugins out as rows had dropped the per-agent sync and update.
Retrying one agent after a partial failure should not re-run the rest,
so each agent in the expanded row gets its own menu. Update is left out
for a deselected agent, which has nothing installed to update.
* feat(ui): count plugins on the Dashboard
The source summary listed every resource kind except plugins, so the
Dashboard under-reported what a source holds. The Playful source note
grows to fit a fifth row.
MCP now sits above Plugins in the sidebar to match that order, and its
Dashboard label reuses the sidebar's "MCP" instead of a longer string
of its own.
* feat(scripts): add a host verification environment
Plugin and MCP work talks to the real Agent CLIs, and those live on the
host, not in the devcontainer, where every target reports "not installed".
Verifying by hand meant either pointing a build at real config or
assembling a dozen environment variables each time.
`make verify` builds a host binary and runs it against .verify-home/ in
the repo, redirecting HOME, the XDG dirs and each agent's own config
variable. The environment starts from `env -i`, so a stray
SKILLSHARE_CONFIG in the caller's shell cannot pull the run back to real
paths. Living inside the repo is safe because project-mode detection
only inspects the working directory and never walks up to a parent.
It also seeds the dashboard cache from ui/dist. A dev build serves a
placeholder rather than the working tree, because runtime download only
applies to numbered versions, so the UI was previously unverifiable
without a release.
* fix(ui): show progress while a plugin selection is applied
Toggling an agent shells out to that agent's own CLI, which takes
seconds. The row gave no sign of it: the toggle only greyed out, and
the confirmation badge is hidden while a target is deselected, so
turning one on looked like nothing happened at all.
The toggle being applied now lifts out of the greyed state and spins in
its badge. Agent versions also get room for their real strings, since
"2.1.276 (Claude Code)" was truncated to a width chosen for a bare
version number.
verify.sh gains a 'run' subcommand, so the same throwaway environment
can be driven from a script rather than only an interactive shell.
* fix(ui): spin the control that started a plugin action
Reading the inventory shells out to six agent CLIs and takes about two
and a half seconds, and every action refreshes it afterwards. Nothing on
the page said so: a menu action closed the menu and left the page still,
so the wait read as a freeze.
Each control now tracks its own work. Check, sync and import spin in
place, a menu action spins the row it acts on, and the agents refresh
follows the query itself rather than the mutation flag.
* feat(ui): split MCP add and import by where the configuration comes from
"Import from a target" opened a dialog whose second tab pasted a snippet,
which is not a target and usually comes from a provider's setup page rather
than a tool the user already configured. Pasting is a way to add a server,
so it moves under "Add server" beside the form, and importing now means one
thing: read what an installed Agent already has.
The paste side gains a file picker, matching `mcp import --file`; the API
only ever took content, so the browser reads the file and fills the editor.
The target picker no longer waits for a successful parse, and a footer that
said "writes 0 config files" next to a greyed-out button now names what is
missing instead.
* fix(ui): label the plugins result strip as the last action
The strip and the plugin inventory below it used the same list styling with
no heading on either, so two rows carrying the same plugin name read as one
list. The status word made it worse: "imported" is one of the outcomes
lifecycle.go returns for an action, but it sat where an inventory row shows
state, so it looked like a property of the plugin.
Give it the section heading the Agents list already has, plus a count and a
dismiss button, so it reads as the report it is.
* feat(plugins): expand compatibility and clarify setup guidance
Support additional native targets, safe source links, Git refs, and explicit OpenCode entries while exposing per-target capabilities across CLI, TUI, and UI.
Separate unsupported integrations from environment errors, explain next steps in plain language, and link official documentation. Update built-in guidance, website docs, completions, and regression coverage.
* feat(plugin): serve a plugin's files and translatable discovery problems
The dashboard could only show a plugin's name and targets, so reviewing
what a plugin ships meant opening the snapshot by hand. Files and
ReadFile expose the reviewed local copy read-only through os.OpenRoot,
which keeps reads inside the snapshot even across symlinks.
Discovery problems now carry a key and arguments next to the English
sentence, so the dashboard can translate them while the CLI keeps its
wording. Inventory asks every Agent CLI in parallel and Packages answers
from config alone, so the plugin list no longer waits on the slowest CLI.
* feat(mcp): sync to Pi, show native config, and lay out written entries
Pi has no built-in MCP support, so a server targeting it must name the
third-party extension that will read the file. `--pi-extension` and the
`piExtension` source field record that choice, and sync writes the file
format of the chosen package instead of guessing.
RenderNative and POST /api/mcp/render return what each Agent would
receive for a definition, with secrets kept as references, so the
dashboard can show the result before anything is written.
Sync used to insert entries on a single line and never revisit them. A
managed entry that still sits on one line is now reported as an update
and rewritten one field per line; entries formatted by hand are left
alone.
* feat(ui): choose plugin Agents like MCP, browse plugin files, view MCP config
The plugin fold listed bound Agents with a per-Agent menu, while MCP let
you simply tick the Agents you want. Plugins now work the same way: the
fold discovers where the source can also go, shows those Agents as
unticked toggles, and a tick previews an install. The per-Agent menu is
gone, and updating a plugin targets only the Agents that support it
instead of hiding the action when one of them does not.
A plugin with a local copy can be browsed in a read-only files dialog,
using the same tree as a skill's Files tab. The MCP "view config" moved
out of a fold in the server form into its own view, reachable from the
server menu, so the native result has room to be read. The MCP dialogs
also ask for the Pi extension when Pi is selected.
Playful tile names drop from 25px to 22px: "brainstorming" was 1px wider
than the tile and lost its last letter to the next line.
* docs: reshoot dashboard screenshots for the redesigned UI
The README and website still showed the pre-redesign dashboard, which no longer matches what users see after upgrading.
* docs: describe MCP, plugins and the new dashboard for v0.21.0
The README still announced v0.20.0 and never mentioned plugins, and its
MCP section listed four clients. The built-in skill and the docs pick up
the Pi extension setup, the formatting-only MCP update, and the plugin
fold and files dialog, so agents and users are not surprised by them.
|
||
|
|
578be7ebd9 |
chore(devcontainer): move docs server from port 3000 to 8888
Port 3000 collides with other local services, blocking the devcontainer from starting. Move the Docusaurus docs server to 8888 across the docs script, dev-servers orchestration, compose port mapping, and forwarded ports/labels. |
||
|
|
474bf3e4c1 |
feat(devcontainer): standalone lifecycle without VS Code dependency
`make devc` now builds, initialises, and enters the devcontainer in one step — no VS Code required. A unified `scripts/devc.sh` replaces the old `devcontainer_shell.sh` with full lifecycle subcommands (up/shell/down/ restart/reset/status). Key changes: - Dockerfile Stage 2 copies node+pnpm from ui-builder (removes need for devcontainer feature, benefits sandbox playground too) - profile.d scripts moved from setup.sh → start-dev.sh so they survive container recreation (down → up) without re-running full setup - Volume-based sentinel (~/.devcontainer-initialized) lets devc.sh skip setup.sh when volumes persist, cutting restart to ~2s - Go toolchain PATH added to profile.d (login shell was losing it) - Makefile/mise.toml gain devc-up/-down/-restart/-reset/-status targets - Website docs updated with terminal-first flow and CLI path in diagrams |
||
|
|
7e1b29a5a7 | refactor(devcontainer): dedupe ssenv shortcut setup and unify mode prompt | ||
|
|
4c628e9dc9 | Add devcontainer ssenv workflow and AI test guide | ||
|
|
7ab4c626fa | Harden devcontainer skillshare entrypoints | ||
|
|
084d93bf94 |
feat(devcontainer): add credential-helper toggle and token forwarding
Add tooling for testing private repo auth inside the devcontainer: - credential-helper script (on/off/status) with --eval mode to toggle both git credential helper and token env vars in one command - remoteEnv forwards host token env vars (GITHUB_TOKEN, GITLAB_TOKEN, BITBUCKET_TOKEN, BITBUCKET_USERNAME, SKILLSHARE_GIT_TOKEN) - docker-compose env_file for .devcontainer/.env (optional, gitignored) - start-dev.sh auto-detects GITHUB_TOKEN from gh CLI on container start - .env.example template for all supported tokens - docker-sandbox.md documents token sources and private repo testing |
||
|
|
eb397c5fed | chore(devcontainer): make ss instant and self-healing | ||
|
|
595fe84c6b |
refactor(devcontainer): simplify dev server management
Replace dev-servers with self-contained `ui` and `docs` commands: - `ui` / `ui -p`: build binary, start API (global/project) + Vite - `ui stop`: stop API + Vite - `docs` / `docs stop`: start/stop Docusaurus - Remove `ui-p` script (merged into `ui -p`) - Fix PID reuse false-positive in is_running() via /proc/cmdline - Fix process tree cleanup in do_stop() (kill children before parent) - Fix pkill pattern to match `skillshare-dev` binary name - Update devcontainer.json port labels and ordering - Update docker-sandbox.md to reflect new commands |
||
|
|
626f0f2240 |
feat(devcontainer): add Node.js 24, auto-start dev servers, and dev-servers manager
Enable full frontend development inside the devcontainer without falling back to the host. Three dev servers (Go API :19420, Vite :5173, Docusaurus :3000) start automatically via postStartCommand and can be managed with the `dev-servers` CLI (start/stop/restart/status/logs). Key changes: - Add Node.js 24 + pnpm devcontainer feature - Auto-install ui/ and website/ dependencies in setup.sh - Add dev-servers.sh process manager with PID tracking - Replace shell aliases with PATH scripts (ss, skillshare-ui, etc.) - Set Vite server.host: true for container accessibility - Make ui-dev Go server host configurable via SKILLSHARE_UI_HOST env var - Forward ports 5173 and 3000 alongside 19420 - Harden setup.sh with environment guard and safe_cleanup helpers - Update docker-sandbox.md with frontend development section |