15 Commits
Author SHA1 Message Date
Willie 6869c39d16 feat(hooks): edit and remove unmanaged Antigravity and Copilot hooks in place (#948)
The "Hooks in targets" dialog could change or remove a hook without
importing it only when the Agent keeps hooks as events of one settings
file. Antigravity blocks and Copilot hook files had to be imported first,
even though both are plain configuration the dialog can address exactly.

Candidates now carry the block or file they were read from (source), and
NativeEdit uses it: an Antigravity edit replaces or removes the whole named
block, keeping enabled: false; a Copilot edit rewrites only the file's
hooks key or deletes the file. Both keep the preview diff, the stale-file
check, the backup, and the hook stays unmanaged. Code hooks (Pi, Oh My Pi,
Amp, OpenCode) still need importing.

Dialog rows are keyed by source, so two Copilot files that read as the same
hook name (lint.json, skillshare-lint.json) can no longer be removed
together. Copilot rows show the file name, the editor names the file, and
removal says the file is deleted.
2026-11-18 02:10:49 +08:00
ed3c825c49 feat(hooks): record Codex hook trust on sync with --trust (#829)
* feat(hooks): record Codex hook trust on sync with --trust

Codex runs a user-level hook only after its trusted_hash is stored in that
home's config.toml, keyed by the hook's position in hooks.json. Only the
TUI's /hooks review writes it, so every hook Skillshare adds or moves starts
untrusted and codex exec skips it without a word.

`hooks sync --trust` (global mode, opt-in) asks each Codex home's
`codex app-server` for the current hash of the hooks Skillshare owns and
writes trusted_hash through config/batchWrite, the same calls /hooks makes,
so the hash is always the one Codex computes. It changes nothing else in
config.toml: disabled hooks stay disabled and are reported. Trust it wrote
is remembered in the hooks state directory, so when a hook moves or is
removed the next --trust sync clears the old position, unless that trust
has changed since. Without codex on PATH the hook files are still written
and the command fails saying trust was not recorded.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(hooks): scope Codex trust to config owner

Scope trust selection and saved hashes to the active config owner so a global config cannot trust or reconcile another config’s hooks.

Recheck hooks.json after hooks/list to avoid trusting a handler from a stale position, and only report trusted or cleared actions after config/batchWrite succeeds. Keep v1 ownerless hashes cleanup-only so upgraded installs clear stale trust after hook removal without trusting foreign hooks.

* fix(hooks): retain parked Codex trust receipts

Locate hooks using all records for their canonical file before selecting the active config owner, so identical hooks remain identifiable across shared and symlinked homes. Keep cleanup receipts for parked registrations whose native group still matches, including when duplicate counts make locate ambiguous, while clearing receipts for removed hooks.

Add regressions for identical hooks across config owners, symlink aliases, parked-home restoration, ambiguous duplicates, and stale receipt cleanup.

* fix(hooks): coalesce symlinked Codex trust homes

Canonicalize current-owner and legacy trust receipts so symlink spellings of one hooks.json are processed once. Remove the redundant parked-position branch because the hash-matching fallback below covers it. Add regression coverage for current and legacy receipts.

* fix(hooks): coalesce removed Codex hook homes

Resolve existing home directories when hook files have been removed so trust receipts for symlink aliases reconcile once. Correct canonical key expectations and exercise coalescing without unsupported ledger migration.

* fix(hooks): read reconciled trust fixture into fresh state

JSON decoding retains existing map entries, so reusing the seeded receipt map makes the alias appear to survive reconciliation. Decode the persisted state into a new value to verify its actual contents.

* feat(hooks): confirm Codex trust before recording it and drop the receipts file

`hooks sync --trust` recorded trust for every owned hook without showing
what it was trusting, and tracked its own writes in codex-trust.json so
it could clear them later. Codex's review exists so that a person sees a
command before it runs, and the receipts file was the source of most of
the edge cases found in review.

Trust is now two steps. A preview asks Codex which owned hooks are new
or changed and returns them with their commands and a revision; the
write takes that revision and is refused when the hooks changed since.
The CLI lists the hooks and asks once, `--yes` skips the question, and
without a terminal nothing is trusted unless `--yes` is given. The
dashboard gets the same two steps as API routes.

Nothing is cleared any more: a leftover entry only matches a hook with
the same event, matcher and handler at that position, which is the hook
the user already approved. That removes codex-trust.json.

The app-server is started without CODEX_HOME for the default home.
Codex resolves the symlinks of CODEX_HOME but not of ~/.codex, so a
symlinked default home got a trust key the user's own Codex never looks
up.

A home whose write fails no longer stops the other homes, and the error
names which were recorded. A preview releases the hooks operation lock
before it waits on Codex, so a slow Codex does not fail other hooks
operations.

Refs #828

* feat(ui): trust Codex hooks from the Hooks page

The dashboard could sync Codex hooks but left them untrusted, so Codex
skipped them until the user ran the CLI or approved each one in Codex.

The Sync box now offers "Trust Codex hooks" in the global scope when a
hook is bound to a Codex target. The dialog shows each hook that needs
trust with its full command and records trust for exactly that list; a
change since the list was shown is refused. The button is hidden while
changes are pending, because trust covers the hooks on disk and the next
sync would invalidate it.

Refs #828

* test(ui): cover the Codex trust dialog's refused, empty and disabled states

Only the happy path was tested, so a regression in the states where the
dialog must not offer a write would have passed. The docs sentence on
several Codex homes now says what is isolated: a failed write, not a
home that cannot be listed.

Refs #828

* refactor(hooks): split the trust prompt and output rendering out of the handlers

hooks_handlers.go had grown past 500 lines and mixed orchestration with
the confirmation prompt and every print function, which the CLI layering
rule asks to keep apart. The code is moved unchanged: the prompt goes to
hooks_prompt.go and the printing to hooks_render.go.

* fix(hooks): leave out a Codex home that cannot be listed instead of stopping

With several Codex homes, one home Codex could not list aborted the whole
trust run, so a broken account home kept every other home untrusted.

A home that fails to list is now reported and left out, and the other
homes are previewed and trusted as usual. The CLI warns before the
question and exits with an error that names the home; the dashboard
dialog shows the same note. When no home can be listed the preview still
fails.

Codex answers a home it cannot load, such as one with an invalid
config.toml, with a successful reply that has no hooks and the reason in
`errors`. That was read as a home without hooks and passed silently. It
is now a failed listing that carries Codex's own message.

Refs #828

* fix(hooks): check the reviewed Codex hooks per home when recording trust

The revision was one digest over every home's hooks. When a home was
listed in the preview but failed to list again at the write, its hooks
dropped out of the digest, so the write was refused as stale: the homes
the user had just reviewed stayed untrusted and the real listing error
was hidden behind "changed since they were listed".

The revision now has one part per home. A home is refused only when its
own hooks changed; a home that cannot be listed any more is reported and
the reviewed homes are still trusted.

Refs #828

* chore: release as 0.30.10

Keep the next release on the patch version the maintainer asked for,
instead of the 0.31.0 that Release Please derives from the feat commit.

Release-As: 0.30.10

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Willie <egg358358@gmail.com>
2026-11-17 15:54:20 +08:00
Willie 0dc2018747 feat(hooks): browse, edit and remove unmanaged hooks in the import dialog (#920)
* feat(hooks): browse, edit and remove unmanaged hooks in the import dialog

The import dialog listed every target's hooks in one long scroll of
full commands, so it was hard to read and hard to tell which target a
row belonged to. It also offered no way to change a hook without first
handing it to skillshare.

The dialog now shows one target at a time from a rail, with two-line
rows that open to the full commands. A hook that lives as an event in a
target's settings file can be edited or removed in place: the change
stays pending, a review step shows the file diff, and only then is the
file written, with a backup that restores it. The hook stays unmanaged.

The write is a new operation in internal/hooks (PreviewNativeEdits and
ApplyNativeEdits) that addresses elements by content, refuses anything
a ledger record holds, and reuses the existing backup and journal path.
Whole-file hooks, Copilot files and Antigravity blocks still have to be
imported first.

* fix(hooks): keep repeated restores and retries from writing a hook twice

Two ways an unmanaged hook could end up in a target file twice:

Restoring the backup of a removal a second time appended the hook
again. An unmanaged hook has no ledger record, so nothing marked the
backup as restored. PreviewRestore now reports a conflict when the
removed hook is already in the file.

When the dialog's native write succeeded and a later import failed, the
retry compared each pending change with the row it was made in. An edit
that moves or adds a command under another event comes back as other
rows, so the change stayed pending and was written again, and the new
row was picked for import. The dialog now drops every change once the
write went through (or reports files it already applied), and keeps
only the rows picked before as imports for the targets it wrote.

* chore: release as 0.30.9

Keep the next release on the patch version the maintainer asked for,
instead of the 0.31.0 that Release Please derives from the feat commit.

Release-As: 0.30.9

* fix(hooks): tell a restored hook from a surviving twin, keep unwritten edits

The check that refuses a second restore of a removed unmanaged hook
looked for any unmanaged hook with the same content. When one of two
identical hooks was removed, the survivor made the first restore look
done. A removal that shifts later hooks is stored as an update plus a
removal, which the check did not cover, and a restored hook that was
imported afterwards no longer counted, so those backups could still
restore twice. Every change to an unmanaged hook now records how many
identical hooks the write left, and a restore is refused only when the
file holds more than that.

When a native write failed after its first file, the dialog dropped
every pending change, including those of files the write never reached.
The failure response now lists the applied files in error_params, and
the dialog drops only the changes of those files. Pasted candidates are
no longer unpicked by a write to the target they were pasted for.

* fix(ui): show a hook row's edit and remove actions once

An open row in the import dialog showed the pencil and trash icons next
to the labelled Edit and Remove buttons below, which do the same thing.
The icons now hide while the row is open; their space is kept so the
chevron stays where it was clicked.

* chore: release as 0.30.9

Keep the next release on the patch version the maintainer asked for,
instead of the 0.31.0 that Release Please derives from the feat commit.

Release-As: 0.30.9

* fix(hooks): count surviving twins for every backup, not only native edits

Only the native edit preview recorded how many identical hooks a write
left, so the backup a restore writes had no count. Undoing a restore
through Backups was then refused whenever a hook with the same content
was still in the file. The count now happens where every backup is
written.

* fix(ui): keep the row icons as the only edit and remove actions

The labelled Edit and Remove buttons under an open row repeated the
icons and stood out too much, so they are gone and the icons stay
visible on open rows again. Each icon now has a tooltip that says what
it does.

* chore: release as 0.30.9

Keep the next release on the patch version the maintainer asked for,
instead of the 0.31.0 that Release Please derives from the feat commit.

Release-As: 0.30.9

* fix(ui): put the import dialog's hooks on one card, with fewer lines and fills

The dialog mixed a grey rail, a grey footer, grey expanded rows and a
divider around every region, and the editor stacked its own Cancel and
Done above the dialog's. It read as cluttered, and a long JSON line
pushed the editor's controls out of the dialog.

The dialog now sits on the page background with the hook list, or the
editor, as one card. Rows are separated only by the list separator, the
row icons are neutral until hovered, and code is the only sunken fill.
One row is open at a time, and a single command no longer repeats its
event as a heading.

While a hook is edited, the dialog's footer holds the editor's actions,
so there is one row of buttons and Cancel returns to the list instead
of closing the dialog with the draft. Commands are sections of the card
and wrap instead of scrolling sideways. The dialog is larger.

The hint is one line, the edit note moved to the footer, and the name
field is labelled by where the name is used.

* chore: release as 0.30.9

Keep the next release on the patch version the maintainer asked for,
instead of the 0.31.0 that Release Please derives from the feat commit.

Release-As: 0.30.9

* fix(ui): give the import review step the same card-on-ground look

The review step still had the white body, the grey footer and the
bordered summary box, so it looked like a different dialog from the
list it follows. It now sits on the page background with the summary
as one card, and the removal tile is neutral with only its icon in the
danger colour.

* chore: release as 0.30.9

Keep the next release on the patch version the maintainer asked for,
instead of the 0.31.0 that Release Please derives from the feat commit.

Release-As: 0.30.9
2026-11-16 22:55:13 +08:00
Rusty ShacklefordandWillie 43059a1428 fix(opencode): preserve v2 hook and plugin directory packages (#915)
* fix(opencode): preserve v2 directory packages

Stage the reviewed issue 913 source for isolated fork validation. Preserve
package directories and manifests without executing managed packages or
installing their dependencies, and include receipt and localized UI fixes.

Reviewed local source: 15ac88e2f266571b8a6dc8d777302db0f4dcae44
Exact source tree: 45ebabfe2b

Static checks and independent inspection completed. Go, integration,
dashboard, rendering, and hosted runtime validation remain pending.
This fork staging commit is not an upstream publication or merge.

* test(opencode): align schema and snapshot assertions

Check the version-aware binding schema and verify native unregister retains the unchanged managed snapshot.

* fix(opencode): resolve Windows npm native launchers

Probe recognized native Opencode executables without invoking a batch shell; exercise the default version probe on hosted Windows.

* test(opencode): normalize Windows fixture line endings

Avoid doubling carriage returns when Git checks out the npm fixture with CRLF.

* fix(opencode): keep an undetected OpenCode version from blocking other agents

Review of the v2 directory package change found that one failed
`opencode --version` probe failed the whole hooks plan, so a machine
without the binary (a second machine sharing the config, CI, a
devcontainer) could no longer sync hooks to any agent, and doctor and
the dashboard preview failed with it.

Hooks:
- A probe that fails or reports an unknown major now skips only the
  OpenCode bindings with one warning per target. Outputs already owned
  there are parked, so they are neither rewritten nor removed while the
  layout is unknown. The probe runs once per plan, list and import.
- A `package` binding on OpenCode v1 is skipped with a warning instead
  of failing the plan.
- The v2 dependency warning is reported once, and only when a package
  file is written, so a synced hook no longer keeps doctor yellow.
- `hooks import` reports an unreadable file such as a symlink as that
  package's problem; other packages and flat files stay importable.
  The package validation problem is reported once instead of twice.
- Directories under `plugins/` are listed as unmanaged only on v2.

Plugins:
- The inventory leaves `plugins/skillshare-NAME` registrations to
  hooks, so a synced v2 hook is not offered as an importable plugin.

Dashboard: the new warnings are translated in every locale, a
`hook NAME:` prefix no longer defeats translation, the native preview
translates its per-file error, and the YAML editor documents `package`.

Docs: the English pages and the built-in skill describe the behavior
above; the ja, ko, zh-Hans and zh-Hant pages now carry the same
content as the English ones. The runbook drives the CLI with mdproof
assertions instead of prose expectations.

Refs #913.

---------

Co-authored-by: Willie <egg358358@gmail.com>
2026-11-16 01:50:14 +08:00
Willie 65f3c8d1b9 fix(ui): show health checks as they finish instead of after the slowest (#870)
* fix(ui): show health checks as they finish instead of after the slowest

The Doctor page waited for the whole `doctor --json` run before showing
anything. One slow check, such as plugin checks waiting on a native CLI
that does not answer, kept the page on a skeleton for 30 seconds, and the
server's 30-second write timeout could cut the response off entirely.

`doctor --json` now prints each check as a {"check": ...} line when the
internal _SKILLSHARE_DOCTOR_STREAM variable is set, before its usual
result. The new GET /api/doctor/stream relays those lines as Server-Sent
Events and sends the full result as `done`; it has no write deadline and
stops doctor when the client leaves. The page shows checks as they
arrive and replaces them with the final result.

* fix(ui): show the server's reason when a stream fails

The audit, diff and doctor streams send an `error` event with the reason,
but the shared EventSource helper treated it like a dropped connection
and showed only a generic message. It now uses the reason the server
sent, and keeps the generic message for a real disconnect.

* fix(doctor): skip Git reads in the hooks check when no hooks are configured

The hooks check loaded the full hooks inventory, which also scans
unmanaged native and Git hooks twice: about 12 git calls even with no
hooks configured, none of which doctor reports. Doctor now reads the
hooks section first and previews a sync only when there is something to
check.
2026-11-12 10:40:15 +08:00
Krishnaswamy SubramanianandWillie dabe06a297 feat(targets): support OpenCode config directory accounts (#594)
* feat(targets): support OpenCode config directory accounts

OpenCode v2 introduces support for custom configuration directories
via OPENCODE_CONFIG_DIR, storing opencode.json and agent directories.

Previously, skillshare rejected OpenCode accounts configured with a
custom config directory because OpenCode was missing config_dir and
was excluded from accountAgents in hooks and MCP services.

- Define default config_dir (~/.config/opencode) in targets.yaml
- Add OpenCode to account agents and register OPENCODE_CONFIG_DIR
  across hooks and MCP service handlers
- Route OpenCode account MCP configuration to opencode.json inside
  the account config directory

Resolves #593.

* fix(targets): add OpenCode to schemas, completions and docs

Add opencode to the targetConfig.agent enum and config_dir description
in schemas/config.schema.json so configurations containing OpenCode
account targets pass schema validation.

Include opencode in the target --agent completion scripts for Bash,
Zsh, Fish, PowerShell, and Nushell.

Update website documentation and built-in skill references to describe
OpenCode accounts and OPENCODE_CONFIG_DIR management alongside other
account agents.

* fix(targets): support plugin accounts and overlap

Add OpenCode account recognition and OPENCODE_CONFIG_DIR resolution to
the plugin service so plugin sync works for OpenCode account targets.

Introduce TargetScanPaths to resolve cross-runtime scan paths using
TargetConfig.Agent for account targets while retaining the account's
own primary directory. Update path overlap detection, doctor checks,
and LeakedSkills to warn about leaked skills for account targets.

Update localized docs (zh-Hans, zh-Hant, ja, ko) and plugin references
to document OpenCode account targets and OPENCODE_CONFIG_DIR. Update
the available targets handler test to expect OpenCode's configDir.

* fix(targets): isolate OpenCode accounts and scan paths

Reject OPENCODE_CONFIG overrides when operating on OpenCode accounts
and clear OPENCODE_CONFIG in the account execution environment so
plugin operations target the account directory.

In TargetScanPaths, remap config-root paths to the account directory
while preserving external scan paths like Codex's ~/.agents/skills.

* fix(plugins): use account target in OpenCode update probe

Pass c.Target instead of a hardcoded "opencode" when probing whether
OpenCode supports plugin updates, ensuring account-configured CLI
binaries and account environment variables are used during preview.

* test(mcp): isolate XDG_CONFIG_HOME in account test service

Isolate XDG_CONFIG_HOME to the temporary test directory in
agentAccountService to prevent runner environment variables from leaking
into TestAccountEnvOverrideDoesNotPruneDefaultHome when testing OpenCode
account shell overrides.

---------

Co-authored-by: Willie <egg358358@gmail.com>
2026-10-22 21:50:06 +08:00
Willie f6e7265414 feat(hooks): read hook code and scripts from files next to the config (#586)
* feat(hooks): read hook code and scripts from files next to the config

Code Agent extensions and command scripts lived as strings in
config.yaml, so a longer Pi extension or shell script was edited inside
a YAML block scalar with no editor support, and nothing type-checked or
linted it. A breaking change in an Agent's extension API went unnoticed
because the generated file is not part of any tsconfig.

A binding now takes `codeFile: path` instead of `code`, and a `files`
value may be `{from: path}` instead of the contents. Paths resolve
against the folder of the config that holds the entry and are read
every time the config is read, so the regular typecheck or shellcheck
can cover the real source. The revision and drift checks use the
resolved contents, so a file edited after a preview fails the apply as
stale.

Saving keeps the references: enable/disable, `hooks edit` and the
dashboard write `codeFile` and `{from}` back instead of inlining the
contents. JSON carries the contents plus `codeFile`/`filesFrom`, and an
entry echoed back with both must match the file, so an edit is refused
rather than silently dropped. Paths must stay inside the config folder
without symlinks, so a cloned project cannot pull in files from
elsewhere. References are taken from the YAML tree before one strict
decode, which keeps unknown-field checks and anchors shared across
bindings working.

Closes #585

* fix(hooks): refuse an emptied file sent with its reference

An empty files value stood for "contents not sent", so a file cleared in
the dashboard's Git YAML editor while its filesFrom reference stayed was
treated as unsent: the file was read again from disk and the save
reported success with the user's edit discarded.

A value read from {from: path} now keeps a dedicated mark until it is
resolved, so an empty value is compared with the file like any other
contents and refused when they differ. Code keeps using empty as unsent,
since a code binding can never be empty.

* fix(hooks): render referenced files as they are on disk

RenderNative rendered the contents the caller sent. The dashboard sends
the entry it loaded, so after a referenced file changed, View
configuration still showed the old contents while describing them as
what sync would write.

Render now drops sent contents for codeFile and {from} references and
reads every reference again, like preview and save. Draft, render and
config decoding are the only paths that take an entry, and all three now
resolve references.

* fix(hooks): accept file references in JSON entries and anchored values

Two inputs that config.yaml accepts failed to load elsewhere.

A `{from}` value carrying its own YAML anchor, aliased from another
binding, lost its anchor because the value node was replaced instead of
rewritten, so the alias no longer resolved. The node is now rewritten in
place with its anchor kept.

An entry JSON file (`hooks add|edit --file x.json`) could not write a
files value as `{"from": path}`, because JSON decoded straight into
string contents. Binding now decodes JSON files values as contents or a
reference, strictly, like YAML, so both entry formats and the Web API
take the same shapes.
2026-10-19 22:48:00 +08:00
Willie 36d04b526b fix(hooks): keep a YAML block scalar's final newline in entry files (#584)
ParseEntry trimmed the whole document before decoding it, which was
meant only to detect a leading `{` for JSON. The YAML branch decoded
the trimmed bytes, so a `code: |` block scalar ending the file lost
its final newline: under clip chomping the line break survives only
if it is present. A Pi or OMP extension added from such a file was
written without a trailing newline and failed formatters such as
`prettier --check`. JSON input was unaffected because its newline is
escaped inside the string.

The YAML branch now decodes the original bytes.
2026-10-19 15:42:16 +08:00
Willie f4c77d53c3 fix(config): refuse project config writes that leave the project
Saves follow a symlinked config.yaml to its target so dotfile links
survive. For a project config that also lets a cloned repository point
.skillshare/config.yaml at any file the user can write, including one
that does not exist yet, and every project save, plugin change, hooks
change, MCP change, or legacy migration would then rewrite or create it.

All five writers now resolve the destination through one helper,
utils.ConfigWritePath. A global config keeps writing through its link.
A project config must resolve inside its project; otherwise the save
fails and names the link so the user can replace it with a regular
file. The one-time legacy migration skips persisting instead, and the
next save reports the link.
2026-10-07 10:19:12 +08:00
Willie 97446744ff feat(omp): add native Oh My Pi support (#423)
* feat(omp): add native Oh My Pi support

Support OMP skills, instructions, MCP, code hooks and guarded extension selection using its verified native contracts rather than Pi aliases.

Add reviewed marketplace plugin installation, cache-preserving scoped removal and fresh-cache reinstall. Align Pi/OMP extension cards and localize inventory guidance while keeping native ownership and read-only constraints.

Include regression coverage, isolated E2E runbooks, documentation and verification policies. Native plugin updates and unverified runtime platforms remain guarded.

Refs #409

* fix(omp): guard runtime ownership and localize inventory guidance

Native install recursively replaces its runtime destination, and a missing cache manifest could leave the real runtime link installed after removal. Bind and recheck an absent reviewed destination, and recover removal names only from verified scope-local links.

Localize fixed backend reasons and warnings across dashboard locales while preserving paths and external diagnostics. Restore the reviewed source in the existing reinstall fixture and record real native verification.

* fix(omp): allow forgetting natively removed plugins

A different plugin can retain node_modules after native uninstall deletes this installation. When its cache, registration and known runtime state are absent, forget only the stale Skillshare binding instead of demanding runtime-name proof for unrelated files.

Extend the existing removal recovery test with a failing-before-fix case that verifies the binding is dropped and unrelated native lock bytes and plugin files are preserved. make check passes.
2026-10-05 20:36:39 +08:00
Willie 9bdc1b3a22 fix(hooks): Git hook follow-ups from #310 (#317)
* fix(hooks): report inactive Git reasons once and warn on a git account

The inactive reason from #310 was appended to every change message and
also added to the plan warnings, so the CLI and the dashboard preview
showed it twice. Global and project roots on the same old Git added the
same warning twice as well, which the preview uses as a React key. Keep
the reason in inactiveReason and a single deduplicated warning.

The git binding always manages Git config hooks, so an account target
named git silently lost its hooks. Warn when an entry uses that binding;
stay quiet otherwise so doctor does not warn about a valid config.

The planner tests for file decisions and main checkout origins no longer
depend on Git 2.54 now that actions are not relabeled, so they run on
older runners too.

Validation: make check in the devcontainer (Git 2.39.5); each new test
fails without its fix.

* fix(doctor): report missing Git as inactive instead of unsynced

When Git is not installed, Git hook outputs are skipped with an inactive
change. Doctor listed it as "not synced (inactive)" and suggested running
sync, which cannot install Git. Report the reason instead, and only
suggest sync when a change is pending or conflicting.

Validation: make check in the devcontainer; the new integration test
runs doctor with an empty PATH and fails without this fix.
2026-10-02 03:15:44 +08:00
Rusty Shackleford 1a2389dea2 feat(hooks): manage Git config hooks (#310)
Git 2.54 added named config hooks, but keeping their registrations and
helper paths consistent across machines still required manual config
edits. Bring them into the same preview, sync, and recovery workflow as
Agent hooks.

- Global and project scope, with linked worktrees sharing the common dir
- Portable helper files, collision detection, and ownership tracking of
  generated files and include.path entries
- Backups and restore preserve unrelated settings and conditional includes
- Management never executes hooks; Git below 2.54 is reported as inactive
  while outputs are still generated
- CLI/API inventory, raw YAML editing in the dashboard, localized docs
2026-10-02 02:56:54 +08:00
Willie 2ab0de6b30 fix(hooks): explain skipped account homes in the rendered preview
RenderNative dropped the warning renderScope records when an account's
config_dir is missing, so the dashboard's config view showed nothing
for that account with no reason. Report it as that target's error,
which the view already marks as a warning and leaves out of the count.
2026-10-01 21:32:32 +08:00
Rusty ShacklefordandWillie aefc9ea0e4 feat(hooks): support account targets in global bindings (#308)
Additional Claude, Codex and Pi homes currently require hand-written hooks.
Resolve declared global account targets through their Agent and config_dir,
while retaining account names in sync, import, inventory and backups.

Preserve ownership when a home moves or disappears, protect cleanup and
restore against directory aliases, and keep plain Agent defaults when an
environment override points at an account. Update dashboard, validation,
schema and localized documentation with regression coverage.

Co-authored-by: Willie <egg358358@gmail.com>
2026-10-01 21:21:53 +08:00
Willie c327a26e30 feat: native hooks, MCP tool policy and Pi built-in MCP (v0.23.0) (#304)
* feat(hooks): manage native hooks across agents

Add global and project hook management for ten coding agents with native
format adapters, explicit ownership, revision-guarded synchronization and
selective backup/restore. Preserve unrelated native configuration and leave
hook execution and trust decisions with each agent.

Expose CLI commands and completions alongside dashboard import, editing,
native preview, target/project views, synchronization and backups. Localize
messages and document the workflows across supported locales.

Validation: devcontainer make check, full dashboard Vitest suite,
TypeScript/Vite build, scoped ESLint, isolated CLI lifecycle and real UI
acceptance. Native agent hook execution was not tested.

* feat(mcp)!: sync Pi only through its built-in MCP

Pi could be synced through three different mechanisms (built-in MCP,
pi-mcp-adapter, or the extension file), chosen per server. Mixing them
inside one scope was an error users hit easily, and the adapter and
extension files drifted from what Pi itself reads. Pi's built-in MCP
now covers what the other modes offered, so every Pi server is written
to ~/.pi/agent/mcp.json or <project>/.pi/mcp.json.

Existing setups migrate on the next sync: entries Skillshare wrote to
mcp-adapter.json are removed through the ownership ledger, extension
entries are rewritten in place, and hand-written entries stay put.
piExtension and piOptionsPrune still load (with a notice) so old
configs keep working, and are dropped on the next save. directTools is
kept but no longer rendered, since only the adapter reads it.

Pruning unchanged fields Skillshare wrote earlier is now always on,
the per-project off switch no longer applies to Pi, and the removed
--pi-extension and --pi-options-prune flags explain the change instead
of failing as unknown. Import still reads mcp-adapter.json read-only so
servers kept only there can be brought over.

BREAKING CHANGE: --pi-extension and --pi-options-prune were removed;
Pi servers are always synced to Pi's built-in MCP file.

* fix(mcp): load Pi switches and adapter options left from before 0.23.0

Phase 1 made Pi sync only through its built-in MCP, which left two
upgrade paths broken or misleading:

- A project entry with disabled: true that selected Pi used to work in
  adapter mode, but now fails every sync with "pi cannot turn off".
  Loading now takes pi (and Pi accounts) out of such an entry with a
  notice; an entry left with no targets stays and turns nothing off, so
  an explicit empty list is now valid for a switch. Saving a new switch
  for pi still fails.
- piOptions keys that only pi-mcp-adapter reads (lifecycle, idleTimeout,
  approveTools, ...) were copied into Pi's built-in mcp.json, where
  nothing reads them. Loading drops them with a notice naming each key,
  and saving new ones is refused. Keys neither Pi nor the adapter
  documents still pass through. includeTools/excludeTools are left for
  the tool policy change, which converts them.

Both changes rewrite the YAML node on load, like the phase 1 legacy
fields, so the next save persists them.

* feat(mcp): portable tool policy per server

Users need one place to say which of a server's tools the model sees,
instead of Pi-only adapter options that Pi's built-in MCP no longer
reads. A server's tools{expose, allow, deny} is rendered per Agent:
Pi gets exposure and an ordered toolExposure, Codex gets
enabled_tools/disabled_tools, Copilot gets its tools list. Parts an
Agent cannot hold (OpenCode and Kilo have no per-server field) are
named in the plan and by mcp check rather than dropped silently.

directTools and the adapter's includeTools/excludeTools are converted
on load and on import, so existing configs keep their behavior; the
--direct-tools flag is removed with a pointer to the new flags.
check --live now reports tool names so the dashboard can suggest them.

Refs #140

* feat(ui): drop the Pi mode, prune switch and Direct tools from MCP

Since 0.23.0 Pi syncs only through its built-in MCP and the API no longer
returns piExtension, so the server dialog showed an empty "Pi MCP mode"
select, links to pi-mcp-adapter and pi-mcp-extension, a prune switch the
backend ignores and adapter-only Direct tools. Toggling Pi also opened a
mode setup that no longer exists, and Pi was still offered as an Agent
that can turn a global server off per project, which the backend refuses.

Pi now shows only tool exposure, its other settings and one link to
Pi's MCP docs. The import dialog still sends piExtension, but only to
pick between Pi's mcp.json and the legacy mcp-adapter.json, which the
listed path already tells apart. Settings the config still carries from
before 0.23.0 are explained once on the MCP page from the source's
notices, worded in the dashboard's language.

* fix(ui): clarify hook takeover and localize MCP actions

Identify global and project hooks in sync previews, show full takeover guidance, and link project conflicts to their Hooks tab. Translate MCP pending actions using the existing locale keys.

* feat(mcp): name unapplied tool policy parts in the render preview

The dashboard's server editor needs to say which Agents cannot follow
part of a tool policy before the server is saved. The plan's notices
only cover saved servers, so each rendered target now carries the gaps
from toolPolicyGaps instead of the UI re-implementing the per-Agent rules.

Refs #140

* feat(ui): edit the portable MCP tool policy in the dashboard

Saving a server from the edit dialog rebuilt it from the form and
dropped its tools policy. The draft now carries tools, and a Tools
section edits exposure, allow and deny for every Agent at once. Tool
names can be loaded on demand from the saved server through the live
check, and each selected Agent that does not apply a part is named from
the backend's render preview.

Pi's other settings flag the adapter-only keys and the exposure fields
that Tools now owns, so the form refuses what the backend refuses with
a message that points to Tools. Rows show a short policy marker, and the
plan's tool policy notices are localized on the MCP page.

Refs #140

* feat(mcp): save the config without retired settings on sync

Notices about settings 0.23.0 retired (piExtension, piOptionsPrune,
adapter-only piOptions, Pi switch entries, directTools/includeTools/
excludeTools) only went away when the user happened to save MCP settings.
Sync never rewrote the source, so most users kept seeing them.

Loading already converts those settings in memory, so a sync now writes
the converted config back (global, per project, external source, CLI and
dashboard), after keeping the previous content in the file history.
Dry runs write nothing, and a failed save is reported after the Agent
files are applied. The plan carries `migrates`, so the dashboard's sync
runs MCP even when no Agent file changes.

The CLI notices are one short line per kind with each server named
once, and a sync prints the file it updated with its backup. The
dashboard no longer shows these notices: sync handles them with nothing
for the user to do, and tool policy gaps stay in the server dialog.

* fix(ui): catch MCP tool policy mistakes before saving

The empty "Other Pi settings" box showed a toolExposure example even
while Tools had a setting. That example is exactly what the dialog
refuses in that state, so it read as a saved value that went unflagged.
The example now leaves toolExposure out while Tools is set.

A Deny list that removes every tool Allow keeps was only refused by the
server, in English with raw field names. The Tools section now says so
in the user's language and disables Save; the server check stays.

* fix(ui): move Pi settings help into info tooltips

The Pi block stacked four lines of help under the exposure select, one
of them in raw config words (entry, toolExposure), which pushed the
fields apart. The help now sits behind keyboard-focusable info icons:
one on a new "Pi settings" heading, which keeps the official docs link
beside it since a tooltip cannot hold a link, and one on the exposure
label with a shorter, plain explanation. The line saying Tools sets the
exposure stays, because it explains why the select is locked.

* docs(mcp): describe Pi built-in only and the tool policy

0.23.0 dropped the Pi modes, the prune switch and directTools, and added a
portable tools policy (#140, #143). The MCP reference still told users to
pick pi-mcp-adapter and pass flags that now fail, and said nothing about
what the first sync does to an old config or which Agents apply which part
of a tool policy.

The reference now covers the tools field and flags with a per-Agent table
linked to each Agent's docs, the dashboard Tools section, Pi's built-in
files and options, and an upgrade section: what the first sync converts,
which adapter entries it removes, the config save with its migrate backup,
and what replaces each removed flag. The how-to, dashboard and backup pages
follow.

* docs(skill): teach the built-in skill the Pi and tool policy changes

Agents using the skill would still pass --pi-extension and --direct-tools,
which fail since 0.23.0, and would not know the tools policy or what a sync
does to a 0.22 Pi config. The MCP reference now matches the CLI; the
description is unchanged and stays within its size limit.

* test(mcp): cover Pi migration and the tool policy in the runbook

The runbook still exercised pi-mcp-extension, pi-mcp-adapter and
--pi-options-prune, all removed in 0.23.0. New steps check Pi built-in
cleanup, the first-sync conversion of a 0.22 config with its migrate
backup and untouched hand-written adapter entries, the removed-flag
messages, and what each Agent receives from one tool policy.

* docs(wiki): record the 0.23.0 MCP Pi and tool policy milestone

Keeps the design decisions and evidence limits of #140 and #143 (the
ledger-driven migration, the migrate backup, per-Agent translation rules)
where later work can find them without reading five phase reports.

* docs(i18n): mirror the Pi built-in and tool policy docs in four locales

The zh-Hant, zh-Hans, ja and ko MCP pages still described the removed Pi
modes and flags, and linked to anchors that no longer exist in English.
They now carry the tool policy, Pi, and upgrade sections with the English
anchors and dashboard labels taken from each locale's UI strings.

* feat(mcp): probe an unsaved server definition for the dashboard

Loading tools in the server dialog could only probe the saved config, so
editing a URL and clicking load tested the old address and surfaced a raw
"connection refused" for a server the user was already fixing. A new server
could not load tools at all until saved.

POST /api/mcp/probe runs the existing live probe on the definition in the
request, resolving env and header references as the saved-server check does,
and never saves or syncs. Failures carry an error kind (connect, timeout,
auth, protocol, command, unknown) so the dashboard can explain them in the
user's language and keep the raw text as detail.

* fix(ui): load MCP tools with the dialog's current settings

The Tools section now probes the connection as the form describes it, so
an edited URL or command is what gets tested and a new server can load its
tools before saving. Probe failures read as short localized messages with
the raw error behind Details instead of the probe's English text.

Loaded names are dropped when the connection fields change, since they may
no longer be this server's tools; editing Allow or Deny keeps them.

* docs(mcp): say Load tools probes the dialog's current settings

The MCP and UI references said the button starts the saved server and that
a new server must be saved first, which is no longer true.

* feat(ui): pick MCP tools from a loaded checklist

Typing exact tool names into allow/deny chip inputs made users guess
names the server already knows. The Tools section now loads the
server's tool list and lets users tick which tools the model gets;
unticking writes the exact name to deny, re-ticking removes it (and
adds it to a non-empty allow list), and rows removed by a deny
wildcard are locked with the rule named in a tooltip.

Wildcard and unlisted rules stay editable as chips in the same box,
and an outcome summary tells users which agents honor the list,
which honor it only partly, and which cannot filter tools at all, so
nobody assumes a filter applies where it does not.

* refactor(mcp): drop tools.expose in favor of Pi's own exposure

tools.expose only ever meant something to Pi, yet it sat in the
cross-Agent tool policy, locked Pi's exposure select whenever a policy
was set, and produced an "expose" gap for every other Agent. Pi's
exposure mode now lives only in piOptions.exposure: it can sit next to
a tool policy (only toolExposure still conflicts, since the policy
writes it), allowed tools inherit it, and pi-mcp-adapter's directTools
migrates to it. The flag and field were never released, so they are
removed without a shim.

The dashboard now describes a policy in plain words ("2 tools
excluded") instead of the old "2 denied" shorthand, shows Pi's
exposure on the server list in words, hints that Enter adds a rule,
and no longer leaves "{}" behind when an exposure is set and then
cleared.

* fix(hooks): make import a takeover and plans say what changes

A hands-on trial showed several rough edges in hooks management:

- Importing one per-event candidate such as claude-stop merged every event
  of the file into the entry, so unrelated hooks became managed.
- An imported hook then conflicted on the next sync as an "identical
  unmanaged hook" until --replace, although importing it was the takeover.
- Narrowing an entry was reported as "remove" of the whole file although
  only one event left it, and plans gave no event-level detail.
- A misspelled event such as Stopp was accepted silently and would never run.
- Rewriting a compact settings.json produced half compact, half indented
  JSON and left an empty hooks key Skillshare itself had added.

A name that matches a candidate now picks only that candidate. Saving an
import (Mutation.adopt) records the identical native registrations as the
entry's own even without sync, so the next sync adopts them in place; edits
made outside Skillshare afterwards still conflict. Changes carry added,
updated and removed events, and "remove" is reserved for an entry that leaves
the file. A per-Agent catalog of documented events, from each Agent's
official hooks reference, drives advisory plan warnings and is served at
GET /api/hooks/catalog. JSON edits keep the file's compact or indented style
and drop a hooks key once Skillshare empties the one it created.

* style(ui): keep clean theme switches and picked cards black and white

The clean theme is black-and-white only, so its on switches and picked
cards use ink instead of the green ok and blue accent colors. The playful
theme keeps its own colors.

* feat(hooks): return full file texts from the hooks preview

The dashboard can only show which Agent files a hooks change touches, not
what changes inside them. POST /api/hooks/preview now also returns files[]:
each native file the plan would change, with its current text and the exact
text sync would write, taken from the same plan apply writes from. Other
plan responses stay unchanged, and the route keeps the localhost-only guard.

* feat(hooks): manage Antigravity and Antigravity CLI hooks

Antigravity and its CLI (agy) are skills targets, but their hooks could
not be managed. Both read the same files, ~/.gemini/config/hooks.json and a
project's .agents/hooks.json, so they are one hooks Agent with
antigravity-cli and agy as aliases.

Antigravity's hooks.json maps hook names to blocks of events rather than
one event map. Each Skillshare hook becomes one block named after it, held
as a single owned element, so ownership, adoption, conflicts and restore
work as for the other Agents. Keeping the block's own name lets an import
take the block over in place; a same-named block Skillshare does not own is
a conflict until it is imported or replaced. Disabled blocks are not offered
for import, and edits keep the file's compact or indented style.

The event catalog lists the documented events (seconds timeouts), import
problems are no longer cleared before validation, and the schema and docs
cover the new Agent.

* fix(hooks): replace an edited registration in place

Acceptance found that --replace on a registration Skillshare owned but
someone edited outside appended a second copy: the edited one stayed in the
file, now unmanaged, next to the replacement. When the element at the
record's last written position is owned by no one, replace now overwrites it
there, for both an edit with --replace and 'hooks sync NAME --replace'.

Writing into a one-line array such as "Stop": [{...}] also mixed one-line
and indented layouts; elements written there now stay on that line. Import
candidate lists print an explanation shared by several rows once instead of
on every row.

* feat(ui): rebuild the hooks page around targets, the catalog and real diffs

Editing a hook meant typing event names from memory, repeating each
target by hand and saving JSON the dashboard could not check, and the
preview only listed actions without showing what would change in a
file. The backend now publishes each target's documented events and the
full before/after text of every file a preview touches, so the UI can
guide the whole flow instead of trusting free text.

- Event fields pick from the catalog with descriptions, and show the
  tool filter and timeout unit only where the target has them.
- An empty target tab offers to copy another target's commands, mapping
  events to their closest equivalent and converting timeout units, and
  says when an event has no counterpart.
- Native JSON gets completion, formatting and linting with the line and
  a suggested event, and never drops invalid text when switching back to
  fields; Cmd/Ctrl+S saves without syncing and Esc asks before
  discarding edits.
- The preview shows one card per file with event-level changes and a
  folded line diff that marks the user's own hooks as untouched.
- Import preloads each target's unmanaged hooks, saves only the checked
  ones with adopt so sync does not duplicate them, and keeps pasting as
  a secondary path.
- Antigravity joins the managed targets, the wording says targets
  throughout, and the remove dialog no longer contradicts itself.

* fix(hooks): keep key order and separators when replacing an element

Replacing a registration in place re-encoded it from a Go map, so its keys
came out sorted, and on a one-line array it was minimized without the
spaces the line used: [{"hooks": [{"type": "command", ...}]}] turned into
[{"hooks":[{"command":...,"type":"command"}]}]. The whole line then showed
as changed and read as a rewrite of the user's style.

A replaced element now keeps the replaced one's key order at every depth,
with new keys at the end, and elements written on a one-line array use the
line's own spacing after colons and commas.

* feat(hooks): stop managing a hook while keeping its entries

Removing a hook from the source always queued the removal of its native
entries on the next sync, so there was no way to hand a synced or adopted
hook back to the user. MCP already has this as `remove --keep-files`.

`hooks remove NAME --keep-files` (and `unmanage` in the API mutation)
removes the entry and forgets its ownership records in that scope, so sync
neither removes nor updates what it wrote; the entries show up as unmanaged
and importable again. It is rejected with --sync, like MCP.

The dashboard remove dialog adds "Stop managing" and now says what each
choice does to the target files, including that "Remove from source only"
still deletes the entries on the next sync. Its backup note is neutral and
the dialog is wider to fit the diff.

* fix(mcp): warn that Pi's built-in MCP needs Pi 0.99.0 and no old extension

The first sync after upgrading moves Pi servers off pi-mcp-adapter and
pi-mcp-extension into Pi's mcp.json. A user still on Pi before 0.99.0
silently loses every server, because older Pi does not read that file, and
Pi's docs say an installed extension that registers /mcp replaces the
built-in MCP. Nothing told them either.

The plan now adds one notice, shown by preview, sync and --json, when it
removes an entry Skillshare wrote to mcp-adapter.json, rewrites an owned
entry in pi-mcp-extension's format (the transport field), or the config
still has settings only the extensions read. The ledger check covers a
config that owns adapter entries without saying piExtension.

* docs(mcp): say what Pi needs before the first 0.23.0 sync

The upgrade section described how the config changes but not the two
things a user must do in Pi: run Pi 0.99.0 or later, and remove
pi-mcp-adapter or pi-mcp-extension, which Pi's docs say replace the
built-in MCP. It now shows the sync warning, lists every dropped adapter
option, and says a disabled entry no longer turns a server off for Pi in
that project. The import paragraph claimed sync never changes
mcp-adapter.json; it removes the entries it wrote there.

* fix(ui): make hook diffs, editors and the hooks rail readable

Supervisor and user trial of the rebuilt hooks page found diffs that
read as "we will touch your hook", an editor too small for real hooks,
and text cut short in the rail.

- Diffs: removed lines red and added lines green through new diff theme
  tokens (the one colour exception in the clean theme), removals before
  additions, lines differing only by a trailing comma or whitespace kept
  as context, long lines wrapped, and the "left as is" marker on its own
  line. An adopt-only card says the file is unchanged.
- Editors: native JSON and code editors expand over the dialog and back
  as the same editor, so lint, completion, format, the error count and
  Cmd/Ctrl+S keep working; Esc closes completion first. The invalid-JSON
  explanation sits above the editor.
- Dialogs are 880px like MCP's.
- Main page: full target paths wrap under the name with no inner scroll
  box, the sync card shows the target file, empty descriptions are
  hidden, the unmanaged note avoids an orphaned character, and the row
  menu uses a hooks-specific "each target" label.
- Import names follow the CLI (<target>-<event>) or a script's basename.

* feat(ui): show MCP plan notices before a sync

The API returned the plan's notices, but no dashboard view showed them, so
dashboard users never saw that the 0.23.0 sync rewrites their config or
that Pi's built-in MCP needs Pi 0.99.0 and no old extension. The MCP sync
dialog and the Sync page now list them, translated through mcp.notice.*
keys; a notice the UI does not know is shown as the server sent it.

* fix(install): default CLI installs to the user-local bin directory

Use ~/.local/bin so ordinary script installs and upgrades do not require administrator access. Preserve INSTALL_DIR overrides and existing installations, verify the installed binary directly, and show PATH setup only when needed.

Add offline installer regressions and align installation guidance across all five documentation locales, including automation PATH setup.

Validation: seven offline installer cases, make check in the devcontainer, all five website locale builds, and AI context checks passed.

* fix(ui): let stop managing succeed and open the source config from the header

Stop managing sent a mutation whose plan differs from the removal preview the
dialog had loaded, because the server forgets the ownership records first, so
the revision never matched and every attempt failed as stale. Both the hooks
and MCP remove dialogs now preview that mutation before saving it; it writes no
target file, so there is no diff to review. Its toast also says the entries
stay in the files instead of "Removed".

The source path line under the lists took space most people never read. A
config.yaml button in the page header now shows the full path on hover and
opens the Config page editor; a separate sources.mcp file has no editor there,
so that case copies the path instead.

The Pi chip on a server row no longer mentions other Pi settings.

* test(server): replay the dashboard's hooks and MCP requests against the handlers

UI tests mock the API with one fixed revision, so a dialog that saves with a
revision from the wrong preview passed every vitest while "Stop managing"
failed in real use. These tests send the exact mutation JSON and preview
revision each dialog uses (remove, stop managing, edit, toggle, takeover,
import/adopt, restore, global and project sync) in global, hooks.projects
or mcp.projects, and project-mode scopes, and pin that hooks refuses an
unmanage saved with the removal preview's revision.

* fix(ui): show comma-only line changes in the hooks diff

A line that only gained or lost a trailing comma was shown as unchanged
with its new text, so the preview hid a real byte change to the file.
Lines still align ignoring the comma, so an added sibling does not shift
unrelated lines, but a differing pair now shows as removed and added,
removals first within each change. The user's own event keeps its
"left as is" note on the new line.

* fix(hooks): name the events a Copilot hook file changes

Copilot keeps each hook in its own file, so its plan changes carried no
events and the preview card showed only the action while every other
Agent listed "+ SessionStart" and the like. The planner now compares the
file's hooks map before and after the write and reports added, updated
and removed events the same way shared files do.

* feat(ui): open config.yaml at the section the header button came from

The config.yaml button on the Hooks and MCP pages opened the editor at
the top, leaving the user to scroll for the part that page manages. It
now links to /config?section=hooks or ?section=mcp, and the Config page
puts the cursor on that top-level key and scrolls it into view once the
file is loaded. A config without the key opens at the top as before.

* fix(ui): say what hooks and MCP dialogs will really do

Trying hooks across eight targets showed several places where the
dashboard hid or misstated the outcome:

- Remove and sync writes every pending change of the scope, but the
  hooks and MCP remove dialogs only named the removed entry; they now
  name the other hooks or servers that go out with it.
- With more than three targets, each remove choice spelled out every
  target; it now gives the count.
- Preview cards shrank to their header in a long list and hid the diff.
- A hook's summary listed SessionStart and sessionStart as separate rows
  with no hint of which target runs which; rows now merge case-only
  differences and show their targets' icons.
- Save and sync used the same toast as a plain save.
- The copy panel promised the closest events even when a target had
  none; it now says those events must be picked by hand.
- The Hooks rail's expandable target rows had no accessible name.

* fix(ui): pair hooks diff lines only at the same indentation

Diff lines were aligned ignoring leading whitespace, so appending an
event paired the file's closing braces with braces inside the new block.
Once differing pairs show as removed and added, that turned one comma
change into a run of removed closing braces. Only the trailing comma is
ignored now, so the diff shows the comma pair and the added lines.

* fix(ui): explain each hook removal choice on its own button

The three consequence lines sat in the dialog body, away from the buttons
they describe, and made the dialog long when a hook reached many targets.
Each explanation now shows as a tooltip on its footer button, on hover and
keyboard focus, and is wired through aria-describedby for screen readers.

Tooltip placed button-anchored tips that did not fit below using the
cursor offset, so a two-line tip covered the buttons; it now flips above
the anchor. It also shows nothing without content, which lets the dialog
keep its buttons mounted while the preview loads.

The CJK strings dropped the space between the target text and the
particle, which read as "8 個目標 的".

* fix(hooks): delete the files and folders a removed hook leaves empty

Syncing a hook to an Agent whose hooks file did not exist, then removing
it, left shells behind: `{}` in Claude, Codex, Gemini, Qwen, Droid and
Antigravity files, `{"version":1}` for Cursor, and empty folders such as
~/.copilot/hooks and ~/.pi/agent/extensions. They look like user
configuration and confuse the next import or review.

The ledger now records the shared files Skillshare created and the
folders it made for its outputs. When removal leaves a created file with
nothing but that skeleton, the plan deletes it and says so, and the file
diff shows the deletion. Files and folders that existed before, settings
or comments the user added, and non-empty folders all stay. Apply checks
the skeleton again, so settings added after the preview keep the file.

* fix(hooks): note Copilot's folder trust and use Pi's current package

Running Copilot CLI against a synced project showed that .github/hooks
is skipped until the folder is in trustedFolders, while COPILOT_HOME
hooks run anyway; the Copilot note was the only command Agent note that
did not mention trust. Pi's extension docs now import ExtensionAPI from
@earendil-works/pi-coding-agent, so the hook template follows them. The
old name still loads because the import is type-only, but editors no
longer resolve its types.

* test(hooks): run synced hooks in real Agent CLIs

Unit tests only prove Skillshare writes the native files we believe are
right. This runbook syncs a marker-writing hook for each Agent, starts
the real CLI once per scope with a throwaway HOME and fake credentials,
and checks the markers, so a format or location mistake shows up as a
missing marker. Antigravity and Cursor check credentials before any hook
runs; the runbook lists how to confirm them by hand.

* fix(hooks): write the hooks section in block style

yaml.v3 encodes an empty mapping as flow `{}`, and entries added to it
inherit that style, so the first hook saved after the section was emptied
landed on one unreadable line in config.yaml. The section is now expanded
before it is written, like the MCP section, which also unfolds entries an
earlier save left on one line.

* fix(ui): let Beautify unfold nested one-line YAML

Beautify kept flow collections as written, so a hooks or MCP section
squeezed onto one line stayed that way and the button reported nothing to
change. It now expands flow collections that nest others, and everything
inside them, while short lists such as `targets: [claude, codex]` stay on
one line. Saving still keeps the user's flow style.

* fix(ui): show hook targets once and light them up per event

Each event line repeated its own row of target icons under the header's
icons, and two rows of logos stacked on the right read as clutter. The
header now shows the targets as one overlapping stack, and hovering an
event line fades the targets it does not run on. Screen readers still hear
each line's targets.

* fix(ui): document the hooks section in the config editor

The field panel labelled every key under hooks as an unknown field, which
suggested the section was a mistake. It now explains hooks, its entries,
bindings, events, code, files and projects like the MCP keys.

* docs(hooks): describe the config editor and Copilot folder trust

The hooks page now writes its section in block style, opens the config
editor at hooks:, and the field panel and Beautify understand the
section; none of that was documented. Running Copilot CLI also showed that
project hooks in .github/hooks load only in a trusted folder, which the
destinations section did not say.

* docs(changelog): add 0.23.0 entry

Records native hooks, the MCP tool policy, the dashboard work around both,
and the Pi built-in MCP breaking changes, so users upgrading from 0.22.2
know what moves on their first sync.

* fix(server): validate hooks when the config editor saves

The config editor kept the hooks section as an opaque node and never ran
the hooks checks, so a malformed binding saved successfully and then broke
the Hooks page and `sync --all` until the YAML was repaired by hand. A
project config could also gain `hooks.projects`, which only the global
config may hold. Saving now rejects both with the same message sync gives.

* fix(hooks): keep an Antigravity block's name when importing it

An Antigravity hook is the named block in hooks.json. Importing one under
another name, through `hooks import --from agy NAME` or a renamed row in the
dashboard, planned a new block and left the original unmanaged, so both
ran. Such a takeover is now a conflict that asks for the block's own name,
and the import dialog keeps that name fixed for Antigravity rows.
2026-10-01 02:24:24 +08:00